• There are no items in your cart

DIN EN 14436 E : 2004

Current
Current

The latest, up-to-date edition.

COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2004

Foreword
0 Introduction
   0.1 General
   0.2 Types of electrolytic tinning process and types
        of coatings of tin or tin alloy
        0.2.1 Process for matt electrolytic coatings
        0.2.2 Process for bright electrolytic coatings
        0.2.3 Process reflow brightened electrolytic
              coatings
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
   4.1 Material of the strip to be tinned
        4.1.1 General
        4.1.2 Symbol
        4.1.3 Number
   4.2 Material for the coating
   4.3 Material condition of the electrolytically tinned
        strip
   4.4 Product
5 Ordering information
6 Requirements
   6.1 Composition
        6.1.1 Strip to be tinned
        6.1.2 Material for the coating
        6.1.3 Purity of tin and tin alloy coatings resulting
              from electrolysis
        6.1.4 Use of sub-layer
   6.2 Mechanical properties and grain size of the base
        material
   6.3 Dimensions and tolerances
        6.3.1 Tolerances on thickness
        6.3.2 Tolerances on widths
        6.3.3 Thickness of coatings and/or sub-layers
        6.3.4 Coating thickness ranges
        6.3.5 Sub-layer thickness
   6.4 Edgewise curvature c
   6.5 Properties of the coating
          6.5.1 Condition
          6.5.2 Appearance
          6.5.3 Solderability
          6.5.4 Adhesion
          6.5.5 Special requirements
7 Sampling
   7.1 General
   7.2 Analysis of the base material
   7.3 Tensile, hardness, grain size and technological
        tests
8 Test methods
   8.1 Analysis of the base material
   8.2 Tensile test of the base material
   8.3 Hardness test of the base material
   8.4 Estimation of average grain size of the base
        material
   8.5 Edgewise curvature c
   8.6 Solderability
   8.7 Adhesion
   8.8 Measurement of coating thickness
   8.9 Retests
   8.10 Rounding of results
9 Declaration of conformity and inspection documentation
   9.1 Declaration of conformity
   9.2 Inspection documentation
10 Marking, packaging and labelling
Tables
Bibliography

This standard is included in DIN HDBK 456/2 E. Describes the composition and tolerances on dimensions in the thickness range from 0,1 mm up to and including 4 mm of strip of copper and copper alloys to be tinned with tin or a tin-lead alloy or other tin alloys.

DocumentType
Standard
Pages
39
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
NEN EN 14436 : 2004 Identical
I.S. EN 14436:2004 Identical
NBN EN 14436 : 2004 Identical
NS EN 14436 : 1ED 2004 Identical
UNI EN 14436 : 2004 Identical
NF EN 14436 : 2004 Identical
EN 14436:2004 Identical
BS EN 14436:2004 Identical
UNE-EN 14436:2005 Identical

DIN HDBK 456/2 E : 1ED 2015 COPPER 2 - STANDARDS ON ROLLED PRODUCTS AND TUBES
DIN HDBK 456/2 E : 1ED 2015 COPPER 2 - STANDARDS ON ROLLED PRODUCTS AND TUBES

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 1655:1997 Copper and copper alloys - Declarations of conformity
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 1412:2016 Copper and copper alloys - European numbering system
ISO 1190-1:1982 Copper and copper alloys Code of designation Part 1: Designation of materials
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
ISO 2624:1990 Copper and copper alloys Estimation of average grain size
ISO 1811-2:1988 Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings
EN 1654:1997/AC:2003 COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS
EN 1976:2012 Copper and copper alloys - Cast unwrought copper products
EN 1173:2008 Copper and copper alloys - Material condition designation
ISO 31-0:1992 Quantities and units Part 0: General principles
ISO 2819:1980 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
ISO 3497:2000 Metallic coatings Measurement of coating thickness X-ray spectrometric methods
ISO 2093:1986 Electroplated coatings of tin — Specification and test methods
ISO 7587:1986 Electroplated coatings of tin-lead alloys — Specification and test methods
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
EN 1652:1997/AC:2003 COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES

View more information
US$130.53
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.