• There are no items in your cart

DIN EN 14879-2:2007-02

Current
Current

The latest, up-to-date edition.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-01-2007

DevelopmentNote
Supersedes DIN 28054-1 E, DIN 28054-2 E, DIN 28054-3 E, DIN 28054-4 E and DIN 28054-5 E. (05/2007)
DocumentType
Standard
Pages
64
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
SN EN 14879-2 : 2007 Identical
BS EN 14879-2:2006 Identical
NBN EN 14879-2 : 2007 Identical
UNI EN 14879-2 : 2007 Identical
UNE-EN 14879-2:2007 Identical
EN 14879-2:2006 Identical
NF EN 14879-2 : 2007 Identical
NS EN 14879-2 : 1ED 2006 Identical
NEN EN 14879-2 : 2006 Identical
I.S. EN 14879-2:2006 Identical

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
EN 13687-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
EN ISO 3001 : 1999 PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT
ISO 813:2016 Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
DIN ISO 8130-2 E : 2005 COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD)
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 3001:1999 Plastics Epoxy compounds Determination of epoxy equivalent
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
ISO 2808:2007 Paints and varnishes Determination of film thickness
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 4625-1:2006 Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004)
ISO 8130-2:1992 Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method)
DIN 53393:1976-03 TESTING OF TEXTILE GLASS-REINFORCED PLASTICS; BEHAVIOUR TO THE EFFECT OF CHEMICALS
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN ISO 2064 : 2000 METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS
ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
ISO 4625-1:2004 Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
ISO 2815:2003 Paints and varnishes Buchholz indentation test
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 2559:2011 Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
ISO 2409:2013 Paints and varnishes Cross-cut test
EN 1081:1998 Resilient floor coverings - Determination of the electrical resistance
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
ISO 178:2010 Plastics Determination of flexural properties
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
ISO 1629:2013 Rubber and latices — Nomenclature
DIN ISO 8130-2:2005-04 COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD)
EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups

View more information
US$187.38
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.