|
ISO 3016:1994
|
Petroleum products Determination of pour point
|
|
DIN 51811:2013-11 (Draft)
|
TESTING OF LUBRICANTS - TESTING OF CORROSIVENESS TO COPPER OF GREASES - COPPER STRIP TARNISH TEST
|
|
ISO 5659-1:1996
|
Plastics Smoke generation Part 1: Guidance on optical-density testing
|
|
DIN 51418-2:2015-03
|
X-RAY SPECTROMETRY - X-RAY EMISSION AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 2: DEFINITIONS AND BASIC PRINCIPLES FOR MEASUREMENTS, CALIBRATION AND EVALUATION OF RESULTS
|
|
DIN ISO 3733:2003-02
|
PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD
|
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
|
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
|
ISO 11007:1997
|
Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases
|
|
ISO 6743-99:2002
|
Lubricants, industrial oils and related products (class L) Classification Part 99: General
|
|
DIN 51418-1:2008-08
|
X-RAY SPECTROMETRY - X-RAY EMISSION- AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 1: DEFINITIONS AND BASIC PRINCIPLES
|
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
|
ISO 7120:1987
|
Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water
|
|
EN ISO 12185:1996
|
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
|
|
EN ISO 9408 : 1999
|
WATER QUALITY - EVALUATION OF ULTIMATE AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AQUEOUS MEDIUM BY DETERMINATION OF OXYGEN DEMAND IN A CLOSED RESPIROMETER
|
|
EN ISO 5659-2:2017
|
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
|
|
DIN 51810-1:2016-09 (Draft)
|
TESTING OF LUBRICANTS - TESTING RHEOLOGICAL PROPERTIES OF LUBRICATING GREASES - PART 1: DETERMINATION OF SHEAR VISCOSITY BY ROTATIONAL VISCOSIMETER AND THE SYSTEM OF CONE/PLATE
|
|
EN ISO 3146:2000/AC:2003
|
PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
|
|
ISO 2137:2007
|
Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum
|
|
ISO 9408:1999
|
Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
|
|
ISO 2160:1998
|
Petroleum products Corrosiveness to copper Copper strip test
|
|
EN ISO 4589-1:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)
|
|
ISO 20623:2003
|
Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method (European conditions)
|
|
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
|
|
ISO 6743-1:2002
|
Lubricants, industrial oils and related products (class L) Classification Part 1: Family A (Total loss systems)
|
|
EN ISO 5659-1 : 1999
|
PLASTICS - SMOKE GENERATION - PART 1: GUIDANCE ON OPTICAL-DENSITY TESTING
|
|
DIN 51398:1983-07
|
TESTING OF LUBRICANTS; PROCEDURE FOR MEASUREMENT OF LOW TEMPERATURE APPARENT VISCOSITY BY MEANS OF THE BROOKFIELD VISCOMETER (LIQUID BATH METHOD)
|
|
ISO/TR 5659-3:1999
|
Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method
|
|
DIN 51820-1:1989-02
|
TESTING OF LUBRICANTS; ANALYSIS OF GREASES BY INFRARED SPECTROMETRY; TAKING & EVALUATING AN INFRARED SPECTRUM
|
|
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
|
|
ISO 6072:2011
|
Rubber Compatibility between hydraulic fluids and standard elastomeric materials
|
|
DIN 51805:1974-08
|
TESTING OF LUBRICANTS; DETERMINATION OF FLOW PRESSURE OF LUBRICATING GREASES, KESTERNICH METHOD
|
|
ISO 7827:2010
|
Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC)
|
|
ISO 3733:1999
|
Petroleum products and bituminous materials — Determination of water — Distillation method
|
|
ISO 9772:2012
|
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
|
ISO 3146:2000
|
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
|
EN ISO 7827:2012
|
WATER QUALITY - EVALUATION OF THE "READY", "ULTIMATE" AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AN AQUEOUS MEDIUM - METHOD BY ANALYSIS OF DISSOLVED ORGANIC CARBON (DOC) (ISO 7827:2010)
|
|
EN ISO 10707 : 1997
|
WATER QUALITY - EVALUATION IN AN AQUEOUS MEDIUM OF THE "ULTIMATE" AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS - METHOD BY ANALYSIS OF BIOCHEMICAL OXYGEN DEMAND (CLOSED BOTTLE TEST)
|
|
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
|
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
|
|
EN ISO 9439 : 2000
|
WATER QUALITY - EVALUATION OF ULTIMATE AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AQUEOUS MEDIUM - CARBON DIOXIDE EVOLUTION TEST
|
|
DIN ISO 6743-99:2012-12
|
Lubricants, industrial oils and related products (class L) - Classification - Part 99: General (ISO 6743-99:2002)
|
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
|
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
|
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
|
ISO 2049:1996
|
Petroleum products Determination of colour (ASTM scale)
|
|
EN ISO 2160:1998
|
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
|
|
ISO 760:1978
|
Determination of water Karl Fischer method (General method)
|
|
EN 15427:2008+A1:2010
|
Railway applications - Wheel/rail friction management - Flange lubrication
|
|
ISO 2176:1995
|
Petroleum products — Lubricating grease — Determination of dropping point
|
|
ISO 4589-1:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
|
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
|
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.