• There are no items in your cart

DIN EN 1995-1-1 E : 2010

Current
Current

The latest, up-to-date edition.

EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2010

National foreword
Foreword
SECTION 1 GENERAL
  1.1 SCOPE
  1.2 NORMATIVE REFERENCES
  1.3 ASSUMPTIONS
  1.4 DISTINCTION BETWEEN PRINCIPLES AND APPLICATION RULES
  1.5 TERMS AND DEFINITIONS
  1.6 SYMBOLS USED IN EN 1995-1-1
SECTION 2 BASIS OF DESIGN
  2.1 REQUIREMENTS
  2.2 PRINCIPLES OF LIMIT STATE DESIGN
  2.3 BASIC VARIABLES
  2.4 VERIFICATION BY THE PARTIAL FACTOR METHOD
SECTION 3 MATERIAL PROPERTIES
  3.1 GENERAL
  3.2 SOLID TIMBER
  3.3 GLUED LAMINATED TIMBER
  3.4 LAMINATED VENEER LUMBER (LVL)
  3.5 WOOD-BASED PANELS
  3.6 ADHESIVES
  3.7 METAL FASTENERS
SECTION 4 DURABILITY
  4.1 RESISTANCE TO BIOLOGICAL ORGANISMS
  4.2 RESISTANCE TO CORROSION
SECTION 5 BASIS OF STRUCTURAL ANALYSIS
  5.1 GENERAL
  5.2 MEMBERS
  5.3 CONNECTIONS
  5.4 ASSEMBLIES
SECTION 6 ULTIMATE LIMIT STATES
  6.1 DESIGN OF CROSS-SECTIONS SUBJECTED TO STRESS
       IN ONE PRINCIPAL DIRECTION
  6.2 DESIGN OF CROSS-SECTIONS SUBJECTED TO
       COMBINED STRESSES
  6.3 STABILITY OF MEMBERS
  6.4 DESIGN OF CROSS-SECTIONS IN MEMBERS WITH VARYING
       CROSS-SECTION OR CURVED SHAPE
  6.5 NOTCHED MEMBERS
  6.6 SYSTEM STRENGTH
SECTION 7 SERVICEABILITY LIMIT STATES
  7.1 JOINT SLIP
  7.2 LIMITING VALUES FOR DEFLECTIONS OF BEAMS
  7.3 VIBRATIONS
SECTION 8 CONNECTIONS WITH METAL FASTENERS
  8.1 GENERAL
  8.2 LATERAL LOAD-CARRYING CAPACITY OF METAL
       DOWEL-TYPE FASTENERS
  8.3 NAILED CONNECTIONS
  8.4 STAPLED CONNECTIONS
  8.5 BOLTED CONNECTIONS
  8.6 DOWELLED CONNECTIONS
  8.7 SCREWED CONNECTIONS
  8.8 CONNECTIONS MADE WITH PUNCHED METAL PLATE FASTENERS
  8.9 SPLIT RING AND SHEAR PLATE CONNECTORS
  8.10 TOOTHED-PLATE CONNECTORS
SECTION 9 COMPONENTS AND ASSEMBLIES
  9.1 COMPONENTS
  9.2 ASSEMBLIES
SECTION 10 STRUCTURAL DETAILING AND CONTROL
  10.1 GENERAL
  10.2 MATERIALS
  10.3 GLUED JOINTS
  10.4 CONNECTIONS WITH MECHANICAL FASTENERS
  10.5 ASSEMBLY
  10.6 TRANSPORTATION AND ERECTION
  10.7 CONTROL
  10.8 SPECIAL RULES FOR DIAPHRAGM STRUCTURES
  10.9 SPECIAL RULES FOR TRUSSES WITH PUNCHED
       METAL PLATE FASTENERS
ANNEX A (informative) - BLOCK SHEAR AND PLUG
        SHEAR FAILURE AT MULTIPLE DOWEL-TYPE
        STEEL-TO-TIMBER CONNECTIONS
ANNEX B (informative) - MECHANICALLY JOINTED BEAMS
ANNEX C (informative) - BUILT-UP COLUMNS
ANNEX D (informative) - BIBLIOGRAPHY

Applicable to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural products, e.g. LVL) or wood-based panels jointed together with adhesives or mechanical fasteners.

DocumentType
Standard
Pages
126
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
EN 335-2:2006 Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
ISO 8970:2010 Timber structures Testing of joints made with mechanical fasteners Requirements for wood density
EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 14545:2008 Timber structures - Connectors - Requirements
EN 1991-1-7:2006/A1:2014 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 300:2006 Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 1991-1-3:2003/A1:2015 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners
EN 312:2010 Particleboards - Specifications
EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
ISO 2081:2008 Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
EN 912:2011 Timber fasteners - Specifications for connectors for timbers
EN 26891:1991 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983)
EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 28970 : 1991 TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY
EN 1991-1-5:2003/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS
EN 1381:2016 Timber structures - Test methods - Load bearing stapled joints
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 385:2001 Finger jointed structural timber - Performance requirements and minimum production requirements
EN 14374:2004 Timber structures - Structural laminated veneer lumber - Requirements
EN 335-3:1995 Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
EN 338:2016 Structural timber - Strength classes
EN 13271:2001/AC:2003 TIMBER FASTENERS - CHARACTERISTIC LOAD-CARRYING CAPACITIES AND SLIP-MODULI FOR CONNECTOR JOINTS
EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
EN 622-3:2004 Fibreboards - Specifications - Part 3: Requirements for medium boards
EN 622-2:2004/AC:2005 FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS
EN 622-4:2009 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 387:2001 Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements
EN 14358:2016 Timber structures - Calculation and verification of characteristic values
EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
EN 1075:2014 Timber structures - Test methods - Joints made with punched metal plate fasteners
EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 636:2012+A1:2015 Plywood - Specifications
EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements

View more information
US$268.73
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.