|
EN 934-1:2008
|
Admixtures for concrete, mortar and grout - Part 1: Common requirements
|
|
EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
|
|
CEN/TR 15177:2006
|
Testing the freeze-thaw resistance of concrete - Internal structural damage
|
|
EN 13877-1:2013
|
Concrete pavements - Part 1: Materials
|
|
ISO 3951-1:2013
|
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
|
|
EN 12390-8:2009
|
Testing hardened concrete - Part 8: Depth of penetration of water under pressure
|
|
CR 13902:2000
|
Test methods for determining the water/cement ratio of fresh concrete
|
|
EN 196-2:2013
|
Method of testing cement - Part 2: Chemical analysis of cement
|
|
EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements
|
|
ISO 7980:1986
|
Water quality Determination of calcium and magnesium Atomic absorption spectrometric method
|
|
EN 13055 : 2016
|
LIGHTWEIGHT AGGREGATES
|
|
CR 13901:2000
|
The use of the concept of concrete families for the production and conformity control of concrete
|
|
EN 12350-2:2009
|
Testing fresh concrete - Part 2: Slump-test
|
|
EN 12350-9:2010
|
Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
|
|
EN 12350-6:2009
|
Testing fresh concrete - Part 6: Density
|
|
EN 1536:2010+A1:2015
|
Execution of special geotechnical work - Bored piles
|
|
DIN 4030-2:2008-06
|
ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 2: SAMPLING AND ANALYSIS OF WATER AND SOIL SAMPLES
|
|
EN 13263-1:2005+A1:2009
|
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
|
|
EN 12390-7:2009
|
Testing hardened concrete - Part 7: Density of hardened concrete
|
|
CEN/TR 16639:2014
|
Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept
|
|
EN 12390-5:2009
|
Testing hardened concrete - Part 5: Flexural strength of test specimens
|
|
EN 15743:2010+A1:2015
|
Supersulfated cement - Composition, specifications and conformity criteria
|
|
EN 12350-12:2010
|
Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test
|
|
EN 1097-3:1998
|
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
|
|
EN 1008:2002
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
|
|
EN 14647:2005/AC:2006
|
CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
|
|
EN 12504-2:2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
|
|
EN 12350-11:2010
|
Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
|
|
CEN/TR 16369:2012
|
Use of control charts in the production of concrete
|
|
EN 14889-2:2006
|
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
|
|
EN 12350-5:2009
|
Testing fresh concrete - Part 5: Flow table test
|
|
EN 14721:2005+A1:2007
|
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
|
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
|
EN 12350-8:2010
|
Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test
|
|
EN 12620:2002+A1:2008
|
Aggregates for concrete
|
|
EN 14889-1:2006
|
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
|
|
EN 14216:2015
|
Cement - Composition, specifications and conformity criteria for very low heat special cements
|
|
EN 12390-1:2012
|
TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
|
|
EN 12504-4:2004
|
Testing concrete - Part 4: Determination of ultrasonic pulse velocity
|
|
EN 12350-4:2009
|
Testing fresh concrete - Part 4: Degree of compactability
|
|
EN 12390-2:2009
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
|
|
CEN/TS 12390-11:2010
|
Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
CEN/TS 12390-9:2016
|
Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
|
|
ISO 7870-4:2011
|
Control charts Part 4: Cumulative sum charts
|
|
EN ISO 7980 : 2000
|
WATER QUALITY - DETERMINATION OF CALCIUM AND MAGNESIUM - ATOMIC ABSORPTION SPECTROMETRIC METHOD
|
|
EN 14488-7:2006
|
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete
|
|
EN 450-1:2012
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
|
|
EN 15167-1:2006
|
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
|
|
ISO 7870-3:2012
|
Control charts Part 3: Acceptance control charts
|
|
EN 12350-1:2009
|
Testing fresh concrete - Part 1: Sampling
|
|
ISO 16204:2012
|
Durability — Service life design of concrete structures
|
|
EN 14199:2015
|
Execution of special geotechnical works - Micropiles
|
|
EN 1097-6:2013
|
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
|
|
ISO 4316:1977
|
Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
|
|
EN 12390-6:2009
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
|
|
EN 12878:2014
|
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
|
|
PREN 16502 : DRAFT 2012
|
TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY
|
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
|
EN 12350-7:2009
|
Testing fresh concrete - Part 7: Air content - Pressure methods
|
|
ISO 7150-1:1984
|
Water quality — Determination of ammonium — Part 1: Manual spectrometric method
|
|
EN 12504-1:2009
|
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
|
|
EN 1538:2010+A1:2015
|
Execution of special geotechnical work - Diaphragm walls
|
|
EN 13577:2007
|
Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
|
|
EN 14487-1:2005
|
Sprayed concrete - Part 1: Definitions, specifications and conformity
|
|
EN 13670:2009
|
Execution of concrete structures
|
|
CEN/TR 16349:2012
|
Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
|
|
EN 12350-10:2010
|
Testing fresh concrete - Part 10: Self-compacting concrete - L box test
|
|
EN 12699:2015
|
Execution of special geotechnical works - Displacement piles
|
|
CEN/TS 12390-10:2007
|
Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete
|
|
CEN/TR 16563:2013
|
Principles of the equivalent durability procedure
|
|
EN 934-2:2009+A1:2012
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
|
|
EN 13791:2007
|
Assessment of in-situ compressive strength in structures and precast concrete components
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.