Name: DIN EN 61558-2-17 : 1998
Brand: DIN

DIN EN 61558-2-17 : 1998

Withdrawn

SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES

Withdrawn date

02-01-2012

Published date

01-12-2013

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
4 Allgemeine Anforderungen
5 Allgemeines über die Prüfungen
6 Bemessungsdaten
7 Klassifikation
8 Aufschriften und weitere Informationen
9 Schutz gegen die Berührbarkeit von gefährlichen
   aktiven Teilen
10 Änderung der Eingangsspannungseinstellung
11 Ausgangsspannung und Ausgangsstrom bei Belastung
12 Leerlauf-Ausgangsspannung
13 Kurzschlussspannung
14 Erwärmung
15 Kurzschluss- und Überlastschutz
16 Mechanische Festigkeit
17 Schutz gegen Staub, feste Gegenstände und Feuchte
18 Isolationswiderstand und Spannungsfestigkeit
19 Aufbau
20 Einzelteile
21 Innere Verdrahtung
22 Anschluss an den Versorgungsstromkreis und äussere
   Anschlussleitungen/-kabel
23 Anschlüsse für äussere Leiter
24 Schutzleiteranschluss
25 Schrauben und Verbindungen
26 Kriech- und Luftstrecken sowie Abstände durch die
   Isolierung
27 Wärme- und Feuerbeständigkeit sowie
   Kriechstromfestigkeit
28 Rostschutz
Anhänge
Anhang C Isolierstoffgruppe II
Anhang D Isolierstoffgruppe I

Applicable to associated power transformers for switch mode power supplies, single- or polyphase, air-cooled, including separating, isolating and safety isolating transformers with a rated supply voltage up to and including 1000 V a.c. and rated frequency of 500 Hz to 1 MHz, where the rated output is not in excess of 10 kVA for single-phase transformers and 16 kVA for polyphase transformers.

DocumentType	Standard
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Withdrawn

Standards	Relationship
I.S. EN 61558-2-17:1998	Identical
BS EN 61558-2-17:1998	Identical
SN EN 61558-2-17 : 1997	Identical
UNE-EN 61558-2-17:1999	Identical
NF EN 61558-2-17 : 2001	Identical
VDE 0570-2-17 : 1998	Corresponds
EN 61558-2-17:1997	Identical
IEC 61558-2-17:1997	Identical

IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60906-3:1994	IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.
EN 60998-1:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 60998-1:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 60738-1:2006+AMD1:2009 CSV	Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
EN 60998-2-2:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60384-14:2013+AMD1:2016 CSV	Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
IEC 60898:1995	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
HD 214 : 200S2	RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
HD 384.4.41 S2:1996/A1:2002	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
HD 366 : 200S1	CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO PROTECTION AGAINST ELECTRIC SHOCK
IEC 60068-2-63:1991	Environmental testing - Part 2: Test methods - Test Eg: Impact, spring hammer.
EN 60695-2-1-1 : 1996	FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE END-PRODUCT TEST AND GUIDANCE
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV	Plugs and socket-outlets for household and similar purposes - Part1: General requirements
EN 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 61000-3-3:2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
IEC 60364-5-51:2005	Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
HD 625.1 : 200S1	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60269-2:2013+AMD1:2016 CSV	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
VDE 0570-1 : 2006 AMD 1 2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 60998-2-1:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
EN 60691:2016	Thermal-links - Requirements and application guide
ISO 3:1973	Preferred numbers Series of preferred numbers
IEC 60695-2-1-0 : 1.0	FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST METHODS - GENERAL
IEC 60947-7-1:2009	Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 60269-2-1:2004	Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
HD 630.3.1 S3:2002	LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
HD 601 : 200S1	TEST PROBES TO VERIFY PROTECTION BY ENCLOSURES
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
HD 630.2.1 : 200S6	LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 5: EXAMPLES OF TYPES OF STANDARDIZED FUSES
IEC 60998-2-2:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60707:1999	Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
IEC 60050-421:1990	International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors
EN 60695-2-1-0 : 1996	FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST METHODS - GENERAL
HD 566 : 200S1	THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
IEC 60269-3:2010+AMD1:2013 CSV	Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
HD 323.2.6 : 200S2	BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST FC AND GUIDANCE: VIBRATION (SINUSOIDAL)
IEC 60076-1:2011	Power transformers - Part 1: General
IEC 60691:2015	Thermal-links - Requirements and application guide
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60906-1:2009	IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
EN 60269-3:1995/A1:2003	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS)
EN 60269-2:1995/A2:2002	LOW-VOLTAGE FUSES - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION)
EN 60076-1:2011	POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
EN 61000-3-2:2014	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
ISO 4046:1978	Paper, board, pulp and related terms — Vocabulary
DIN EN 61558-1 : 2006 AMD 1 2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
HD 193 : 200S2	VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
EN 61058-1:2002/A2:2008	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 60664-3:2016	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 60884-2-4:2007	Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
EN 60999-1:2000	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
HD 441 : 200S1	METHODS OF TEST FOR THE DETERMINATION OF THE FLAMMABILITY OF SOLID ELECTRICAL INSULATING MATERIALS WHEN EXPOSED TO AN IGNITING SOURCE
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 60068-2-32:1993	Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall
EN 60947-7-1:2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
HD 625.3 : 200S1	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATINGS TO ACHIEVE INSULATION COORDINATION OF PRINTED BOARD ASSEMBLIES
IEC 61032:1997	Protection of persons and equipment by enclosures - Probes for verification
HD 384.5.51 : 200S2	ELECTRICAL INSTALLATION OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
HD 243 : S12	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - INDEX, SURVEY AND COMPILATION OF THE SINGLE SHEETS
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60068-2-63 : 1994	ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
IEC 60998-2-1:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements