• There are no items in your cart

DIN EN 61779-1 : 2001 AMD 11 2004

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
Withdrawn date

07-01-2008

Published date

01-12-2013

Vorwort
1 Allgemeines
  1.1 Anwendungsbereich
  1.2 Normative Verweisungen
2 Begriffe
  2.1 Gaseigenschaften
  2.2 Gerätearten
  2.3 Sensoren
  2.4 Gaszufuhr zum Gerät
  2.5 Ausgangssignale und Alarme
  2.6 Zeiten
  2.7 Verschiedenes
3 Allgemeine Anforderungen
  3.1 Einleitung
  3.2 Bauweise
4 Prüfverfahren
  4.1 Einleitung
  4.2 Allgemeine Prüfanforderungen
  4.3 Normalbedingungen fürdie Prüfung
  4.4 Prüfverfahren
5 Kalibriervorrichtung für den Feldeinsatz
6 Verwendungshinweise
  6.1 Beschriftung und Kennzeichnung
  6.2 Betriebsanleitungen mit ihren
Anhang A (normativ) Explosionsgrenzen (d. h. UEG und
          OEG) einiger brennbarer Gase und Dämpfe
Anhang B (informativ) Bestimmung von Einstellzeiten
Anhang C (informativ) Literaturhinweise
Anhang ZA (normativ) Normative Verweisungen auf
          internationale Publikation mit ihren
          entsprechenden europäischen Publikationen

Gives general requirements for the construction and testing and describes the test methods applicable to portable, transportable and fixed apparatus for detecting and measuring flammable gas or vapour concentrations with air. The apparatus, or parts of apparatus are meant for use in potentially explosive atmospheres and in mines susceptible to firedamp. This standard is supplemented by the following standards: IEC 61779-2, IEC 61779-3, IEC 61779-4 and IEC 61779-5.

DocumentType
Standard
PublisherName
Verband Deutscher Elektrotechniker
Status
Withdrawn
Supersedes

IEC 60050-351:2013 International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
DIN EN 50073 : 2000 GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES OR OXYGEN
EN 61000-4-1:2007 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
DIN EN 50017 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - POWDER FILLING 'Q'
IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
DIN EN 60068-2-6 : 1996 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
DIN EN 60079-10 : 2004 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 10: CLASSIFICATION OF HAZARDOUS AREAS
DIN ISO 6142:1985-05 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - WEIGHING METHODS
DIN EN 61000-4-4 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
VDE 0170-6 : 2016 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
DIN EN 50039 : 1982 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS "I"
ISO 6147:1979 Gas analysis Preparation of calibration gas mixtures Saturation method
DIN EN 50270 : 2015 COR 1 2016 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
VDE 0847-4-1 : 2007
VDE 0847-4-4 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
VDE 0170-5 : 2015-04 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' (IEC 60079-1:2014)
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
DIN EN 50019 : 2001 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
DIN VDE 0170/0171-9 : 1988 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES; ENCAPSULATION "M"
VDE 0170-7 : 2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" (IEC 60079-11:2011 + COR.:2012)
VDE 0170/0171-10 : 1982 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS "I"
VDE 0170/0171-3 : 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
ISO 6142:2001 Gas analysis Preparation of calibration gas mixtures Gravimetric method
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
VDE 0165-1 : 2014 COR 1 2016 EXPLOSIONSGEFHRDETE BEREICHE - TEIL 14: PROJEKTIERUNG, AUSWAHL UND ERRICHTUNG ELEKTRISCHER ANLAGEN (IEC 60079-14:2013)
DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
DIN EN 61000-4-3 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
DIN EN 61000-4-1 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
VDE 0170-4 : 2015 Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
VDE 0400-21 : 2011 ELEKTRISCHE GERAETE FUER DIE DETEKTION UND MESSUNG VON BRENNBAREN GASEN, GIFTIGEN GASEN ODER SAUERSTOFF - ANFORDERUNGEN UND PRUEFUNGEN FUER WARNGERAETE, DIE SOFTWARE UND/ODER DIGITALTECHNIK NUTZEN
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
VDE 0170-1 : 2014 EXPLOSIONSGEFAEHRDETE BEREICHE - TEIL 0: BETRIEBSMITTEL - ALLGEMEINE ANFORDERUNGEN (IEC 60079-0:2011, MODIFIZIERT +COR.:2012+COR.:2013)
VDE 0170-2 : 2016 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' (IEC 60079-6:2015)
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
DIN EN 50020 : 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSIC SAFETY 'I'
ISO 6145-4:2004 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method
ISO 6145-3:1986 Gas analysis Preparation of calibration gas mixtures Dynamic volumetric methods Part 3: Periodic injections into a flowing gas stream
DIN EN 50015 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O'
ISO 6145-1:2003 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration
VDE 0847-4-3 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
DIN EN 50271 : 2011 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES
ISO 6145-6:2017 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices
DIN EN 50018 : 2001 AMD 1 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
VDE 0843-30 : 2015 COR 1 2016 ELEKTROMAGNETISCHE VERTRAEGLICHKEIT - ELEKTRISCHE GERAETE FUER DIE DETEKTION UND MESSUNG VON BRENNBAREN GASEN, TOXISCHEN GASEN ODER SAUERSTOFF
VDE 0400-6 : 2000 GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.