DIN EN ISO 10524-3:2013-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-02-2019
German, English
01-01-2013
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 General requirements
6 Test methods
7 Marking, colour coding, packaging
8 Information to be supplied by the manufacturer
Annex A (informative) - Examples of pressure
regulators integrated with cylinder
valves
Annex B (normative) - Rationale
Annex C (informative) - Reported regional and national
deviations of colour coding and nomenclature
for medical gases
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 93/42/EEC
Applicable to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients.
DevelopmentNote |
Supersedes DIN EN 738-3. (07/2006) DRAFT 2017 issued in April 2017. (04/2017)
|
DocumentType |
Standard
|
Pages |
42
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
NS EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
ONORM EN ISO 10524-3 : 2013 | Identical |
NF EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
NBN EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
EN ISO 10524-3:2006/A1:2013 | Identical |
UNI EN ISO 10524-3 : 2013 | Identical |
SN EN ISO 10524-3 : 2006 AMD 1 2014 | Identical |
I.S. EN ISO 10524-3:2006 | Identical |
NEN EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
ISO 10524-3:2005 | Identical |
EN ISO 10524-3:2019 | Identical |
UNE-EN ISO 10524-3:2007 | Identical |
BS EN ISO 10524-3 : 2006 | Identical |
DIN EN ISO 10524-4:2008-09 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
DIN EN ISO 15002:2008-11 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
DIN EN ISO 22435:2013-03 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007 + AMD.1:2012) |
DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
ISO 10920:1997 | Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
DIN EN ISO 10079-3:2014-09 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
DIN EN ISO 4126-7:2013-12 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013 + AMD 1:2016) |
EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
EN 737-3:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
ISO 5145:2014 | Cylinder valve outlets for gases and gas mixtures Selection and dimensioning |
ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
ISO 5359:2014 | Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases |
ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
EN 962:1996/A2:2000 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
EN 849:1996/A2:2001 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
ISO 407:2004 | Small medical gas cylinders Pin-index yoke-type valve connections |
AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
ISO/TR 7470:1988 | Valve outlets for gas cylinders — List of provisions which are either standardized or in use |
ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
DIN EN ISO 7291:2015-12 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010 + Amd 1:2015) (includes Amendment :2015) |
VDE 0750-1 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
DIN EN ISO 4135:2002-03 | Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.