IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method
|
EN ISO 10350 : 1995
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
|
EN ISO 8256:2004
|
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
|
ISO 293:2004
|
Plastics — Compression moulding of test specimens of thermoplastic materials
|
ISO 3167:2014
|
Plastics Multipurpose test specimens
|
ISO 527-4:1997
|
Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
|
DIN EN ISO 10350-1:2016-08 (Draft)
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
|
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
|
EN ISO 75-1:2013
|
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
|
DIN EN 60243-1 : 2014
|
ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength
|
ISO 10350:1993
|
Plastics Acquisition and presentation of comparable single-point data
|
EN ISO 2818:1996
|
PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
|
DIN EN 60112 : 2010
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
|
DIN EN ISO 1183-1:2013-04
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
|
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
ISO 1628-3:2010
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes
|
DIN EN ISO 1183-3:2000-05
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
|
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics
|
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
|
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014)
|
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
ISO 1210:1992
|
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
ISO 3146:2000
|
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
ISO 11542-1:2001
|
Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 1: Designation system and basis for specifications
|
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing
|
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
ISO 62:2008
|
Plastics Determination of water absorption
|
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining
|
DIN EN 60296 : 2012
|
FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012)
|
ISO 899-1:2017
|
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
ISO 4589-1:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
DIN EN ISO 10350-2:2011-06
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|