DIN EN ISO 13504:2012-10
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
10-01-2012
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Intended performance
6 Performance attributes
7 Material selection
8 Performance evaluation
9 Manufacturing
10 Reprocessing
11 Information to be supplied by
the manufacturer
Annex A (normative) - Materials found acceptable
for instrument manufacture
Annex B (informative) - Cross-referencing of steel
grades specified in international,
regional or national standards
Bibliography
This standard is included in DIN HDBK 267/2.
Committee |
TC 106
|
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
ISO 13504:2012 | Identical |
EN ISO 13504:2012 | Identical |
DIN HDBK 267/2 : 2ED 2014 | |
DIN EN ISO 17937:2016-01 | Dentistry - Osteotome (ISO 17937:2015) |
DIN EN ISO 19490:2016-07 (Draft) | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
DIN EN ISO 15223-1:2015-08 (Draft) | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS (ISO 15223-1:2016, CORRECTED VERSION 2017-03) |
ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
ISO 15510:2014 | Stainless steels Chemical composition |
ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
ASTM A 959 : 2016 : REDLINE | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
ISO 15730:2000 | Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel |
DIN EN ISO 17664:2016-06 (Draft) | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES (ISO 17664:2017) |
ISO 5832-3:2016 | Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
ISO 7405:2008 | Dentistry Evaluation of biocompatibility of medical devices used in dentistry |
ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
DIN EN ISO 5832-3:2015-06 (Draft) | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016) |
ISO 18472:2006 | Sterilization of health care products Biological and chemical indicators Test equipment |
ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
ISO 1942:2009 | Dentistry Vocabulary |
DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
ISO 5832-2:1999 | Implants for surgery Metallic materials Part 2: Unalloyed titanium |
DIN EN ISO 14155:2012-01 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - GOOD CLINICAL PRACTICE (ISO 14155:2011 + COR. 1:2011) |
ISO 7153-1:2016 | Surgical instruments Materials Part 1: Metals |
ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
DIN EN ISO 7405:2013-12 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008 + AMD. 1:2013) |
DIN EN ISO 1942:2011-03 | Dentistry - Vocabulary (ISO 1942:2009, Corrected version 2010-03-01) |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
ISO 15883-2:2006 | Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
DIN EN ISO 5832-2:2012-08 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:1999) |
ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
SAC GB/T 20878 : 2007 | STAINLESS AND HEAT-RESISTING STEELS - DESIGNATION AND CHEMICAL COMPOSITION |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.