DIN EN ISO 15528:2013-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013)
Available format(s)
Hardcopy , PDF
Superseded date
12-02-2020
Language(s)
English, German
Published date
12-01-2013
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Sampling equipment
6 Sampling procedure
Bibliography
This standard is included in DIN Handbook 201.
| Committee |
TC 35
|
| DevelopmentNote |
Supersedes DIN V 53242-1, DIN 53242-2, DIN 53242-3, DIN 53242-4, DIN 53242-1 and DIN EN 21512 (11/2000)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 15528 : 2013 | Identical |
| I.S. EN ISO 15528:2013 | Identical |
| NS EN ISO 15528 : 2013 | Identical |
| EN ISO 15528:2013 | Identical |
| NBN EN ISO 15528 : 2013 | Identical |
| BS EN ISO 15528:2013 | Identical |
| SN EN ISO 15528 : 2013 | Identical |
| NF EN ISO 15528 : 2013 | Identical |
| NEN EN ISO 15528 : 2013 | Identical |
| ISO 15528:2013 | Identical |
| UNI EN ISO 15528 : 2014 | Identical |
| UNE-EN ISO 15528:2014 | Identical |
| DIN EN ISO 9117-2:2010-07 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
| DIN EN ISO 277:2011-02 | Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
| DIN 53781:2016-03 | PAINTS AND VARNISHES - METHODS FOR TESTING THE RESISTANCE OF COATINGS TO IONIZING RADIATION IN NUCLEAR PLANTS |
| DIN EN ISO 8130-4:2011-02 | Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor. 1:1993) |
| DIN EN ISO 2812-2:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| DIN HDBK 201 : 8ED 2017 | ROHSTOFFE FUER BESCHICHTUNGSSTOFFE 2 - BINDEMITTEL, LOESEMITTEL UND WEICHMACHER - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| DIN EN ISO 28199-1:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| DIN EN ISO 787-7:2010-02 | General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009) |
| DIN EN ISO 8130-2:2011-02 | Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:1992) |
| DIN EN ISO 4619:2011-02 | DRIERS FOR PAINTS AND VARNISHES |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| DIN EN ISO 2811-1:2016-08 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| DIN EN ISO 10283:2007-11 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF MONOMERIC DIISOCYANATES IN ISOCYANATE RESINS |
| DIN EN ISO 11507:2007-05 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| DIN EN ISO 1248:2008-06 | Iron oxide pigments - Specifications and methods of test (ISO 1248:2006, including Technical Corrigendum 1:2007) |
| BWB TL 8010-0000 : 3ED 2003 | BESCHICHTUNGSSTOFFE, VERDUENNER, HAFTGRUNDMITTEL, ABBEIZMITTEL, SPACHTELMASSEN U. AE. PRODUKTE |
| DIN EN ISO 3233-1:2013-05 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| DIN EN ISO 150:2007-05 | RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| DIN 55957:2016-08 | BINDERS FOR PAINTS AND VARNISHES - METHYLATION AND SILYLATION OF FATTY ACIDS AND ANALYSIS BY GAS CHROMATOGRAPHY |
| DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| DIN EN ISO 14680-1:2006-04 | Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) |
| DIN EN ISO 14680-3:2006-04 | Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) |
| DIN EN ISO 14680-2:2006-04 | Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) |
| DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| DIN EN ISO 7142:2007-05 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| DIN EN ISO 7579:2010-03 | Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
| DIN EN ISO 9038:2013-12 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| DIN EN ISO 1520:2007-11 | PAINTS AND VARNISHES - CUPPING TEST |
| DIN EN ISO 1513:2010-10 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| DIN 53219:2009-08 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY |
| DIN EN ISO 20567-3:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
| DIN EN ISO 6271 E : 2016 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE (ISO 6271:2015) |
| DIN EN ISO 9117-3:2010-07 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| DIN EN ISO 3233-2:2014-10 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| DIN 53240-2:2007-11 | DETERMINATION OF HYDROXYL VALUE - PART 2: METHOD WITH CATALYST |
| DIN EN ISO 12137:2012-01 | Paints and varnishes - Determination of mar resistance (ISO 12137:2011) |
| DIN EN ISO 7783:2012-02 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| DIN EN ISO 17132:2008-01 | PAINTS AND VARNISHES - T-BEND TEST |
| DIN EN ISO 14446:2011-02 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| DIN EN ISO 16474-1:2014-03 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| DIN EN ISO 8130-7:2011-02 | COATING POWDERS - PART 7: DETERMINATION OF LOSS OF MASS ON STOVING |
| DIN EN ISO 16805:2005-07 | Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003) |
| DIN EN ISO 7143:2007-05 | Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
| DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN EN ISO 11890-1:2007-09 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| DIN EN ISO 1519:2011-04 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| DIN EN ISO 15181-1:2007-10 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| DIN 55968:2013-08 | PIGMENTS - INDUSTRIAL CARBON BLACKS (LAMP BLACK, FURNACE BLACK, GAS BLACK) - REQUIREMENTS AND METHODS OF TEST |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| DIN EN ISO 9117-4:2012-11 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| DIN HDBK 286/4 : 2ED 2013 | KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 4 - KORROSIONSGESCHUETZTE ERZEUGNISSE, ALLGEMEINE NORMEN |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| DIN EN ISO 1524:2013-06 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013) |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| DIN EN ISO 13736:2013-08 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| DIN 67510-1:2009-11 | PHOSPHORESCENT PIGMENTS AND PRODUCTS - PART 1: MEASUREMENT AND MARKING AT THE PRODUCER |
| DIN EN ISO 16925:2014-06 | Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014) |
| DIN EN ISO 16927:2014-06 | PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014) |
| DIN HDBK 266 : 2ED 2004 | KORROSIONSSCHUTZ VON STAHL DURCH BESCHICHTUNGEN UND UEBERZUEGE 3 - DIN-EN-ISO-NORMEN |
| DIN EN ISO 8130-3:2011-02 | Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992) |
| DIN EN ISO 6271:2016-05 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE (ISO 6271:2015) |
| DIN 53170:2009-08 | SOLVENTS FOR PAINTS AND VARNISHES - DETERMINATION OF THE EVAPORATION RATE |
| DIN EN ISO 10601:2008-08 | MICACEOUS IRON OXIDE PIGMENTS FOR PAINTS - SPECIFICATIONS AND TEST METHODS |
| DIN EN ISO 1518-2:2012-01 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
| DIN HDBK 157 : 2012 | FARBMITTEL 2 - PIGMENTE, FUELLSTOFFE, FARBSTOFFE - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN |
| DIN EN ISO 6504-3:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| DIN EN ISO 6504-1:2006-04 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS |
| DIN EN ISO 17895:2005-06 | PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND CONTENT OF LOW-VOC EMULSION PAINTS (IN-CAN VOC) |
| DIN 55609:1999-10 | DETERMINING WATER-SOLUBLE SULFATES, CHLORIDES AND NITRATES IN PIGMENTS AND FILLERS BY ION CHROMATOGRAPHY |
| DIN EN ISO 4618:2015-01 | Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014 |
| DIN EN ISO 1513:2010-10 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 6206:1979 | Chemical products for industrial use — Sampling — Vocabulary |
US$99.89
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.