DIN EN ISO 5826:2014-07
Current
Current
The latest, up-to-date edition.
RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO 5826:2014)
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
07-01-2014
This standard is included in DIN DVS Handbook 312.
| Committee |
TC 44
|
| DevelopmentNote |
Supersedes DIN ISO 5826. (10/2003) Supersedes VDE 0545-10. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 5826:2004 | Identical |
| BS EN ISO 5826:2014 | Identical |
| EN ISO 5826:2014 | Identical |
| NEN EN ISO 5826 : 2014 | Identical |
| NBN EN ISO 5826 : 2014 | Identical |
| I.S. EN ISO 5826:2014 | Identical |
| SN EN ISO 5826:2014 | Identical |
| UNI EN ISO 5826 : 2014 | Identical |
| ISO 5826:2014 | Identical |
| NF EN ISO 5826 : 2014 | Identical |
| NS EN ISO 5826 : 2014 | Identical |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN ISO 669:2016-07 | RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016) |
| DIN ISO 12166 E : 2006 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| DIN ISO 12166:2006-02 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| DIN EN ISO 22829:2015-09 (Draft) | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - INTEGRATED TRANSFORMER-RECTIFIER UNITS FOR WELDING GUNS OPERATING AT 1000 HZ (ISO 22829:2017) |
| DIN EN ISO 17657-4:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| DIN EN 60664-1 : 2008 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| ISO 10656:2016 | Resistance welding equipment Transformers Integrated transformers for welding guns |
| DIN ISO 669:2001-06 | RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS |
| VDE 0140-1:2016-11 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016) |
| ISO 17657-3:2005 | Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| VDE 0545-1 : 2016 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION (IEC 62135-1:2015 + COR.:2016) |
| DIN EN 60085 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| DIN EN 60204-1 : 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 62135-1 : 2016 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION (IEC 62135-1:2015 + COR.:2016) |
| VDE 0301-1 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| ISO 17657-4:2005 | Resistance welding Welding current measurement for resistance welding Part 4: Calibration system |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| DIN EN 60051-2:1991-11 | Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989 |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| DIN EN 61140 : 2016-11 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016) |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
| VDE 0113-1 : 2007 COR 1 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 17657-3:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 3: CURRENT SENSING COIL |
| DIN EN ISO 17677-1:2010-01 | RESISTANCE WELDING - VOCABULARY - PART 1: SPOT, PROJECTION AND SEAM WELDING |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 22829:2017 | Resistance welding equipment — Transformers — Integrated transformer-rectifier units for welding guns operating at 1 000 Hz |
| ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
US$115.05
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.