DIN EN ISO 7500-1:2016-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015)
Available format(s)
Hardcopy , PDF
Superseded date
07-28-2020
Language(s)
German, English
Published date
01-01-2016
National foreword
National Annex NA (informative) - Bibliography
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and their meanings
5 General inspection of the testing machine
6 Calibration of the force-measuring system of the testing
machine
7 Class of testing machine range
8 Verification report
9 Intervals between verifications
Annex A (normative) - General inspection of the
testing machine
Annex B (informative) - Inspection of the loading platens
of the compression testing machines
Annex C (informative) - Uncertainty of the calibration
results of the force-measuring system
Bibliography
This standard is included in DIN Handbook 19, 118/4 and 205.
| DevelopmentNote |
Supersedes DIN EN 10002-2 and DIN 51227 (01/2000) DRAFT 2017 issued in December 2017. (12/2017)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 7500-1:2016 | Identical |
| BS EN ISO 7500-1:2015 | Identical |
| ISO 7500-1:2015 | Identical |
| I.S. EN ISO 7500-1:2015 | Identical |
| UNI EN ISO 7500-1 : 2005 | Identical |
| NEN EN ISO 7500-1 : 2016 | Identical |
| NF EN ISO 7500-1 : 2016 | Identical |
| SN EN ISO 7500-1 : 2016 | Identical |
| NBN EN ISO 7500-1 : 2016 | Identical |
| ONORM EN ISO 7500-1 : 2016 | Identical |
| EN ISO 7500-1:2018 | Identical |
| NS EN ISO 7500-1 : 2018 | Identical |
| I.S. EN ISO 7500-1:2018 | Identical |
| DIN EN ISO 20504:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
| BWB TL 4220-0026 : 1ED 2002 | LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE |
| DIN V 18152:2003-10 | LIGHTWEIGHT CONCRETE SOLID BRICKS AND BLOCKS |
| DIN V 4165:2003-06 | AUTOCLAVED AERATED CONCRETE HIGH PRECISION UNITS AND ELEMENTS |
| DIN ISO 11093-6:2005-09 | Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005) |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| DIN EN ISO 15630-2:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| DIN EN 13567:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 3386-1:2015-10 | POLYMERIC MATERIALS, CELLULAR FLEXIBLE - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 1: LOW-DENSITY MATERIALS (ISO 3386-1:1986 + AMD 1:2010) |
| DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| VDI/VDE 2624 Blatt 3.1:2011-12 | Measurement of mechanical quantities - Instructions for the calibration of test units for spring band hose clamps |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| DIN EN ISO 13356:2016-02 | IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
| DIN EN ISO 8067:2009-06 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
| DIN 53579:2015-04 | TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS |
| DIN 29595:2007-04 | Welding in aerospace - Fusion welded metallic components - Requirements |
| DIN EN ISO 17161:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014) |
| DIN EN ISO 15630-1:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| DIN EN ISO 10271:2011-10 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
| DIN EN ISO 3376:2012-03 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TENSILE STRENGTH AND PERCENTAGE EXTENSION (ISO 3376:2011) |
| DIN EN ISO 17236:2016-07 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF EXTENSION SET (ISO 17236:2016) |
| DIN EN ISO 3386-2:2010-09 | Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010) (includes Amendment A1:2010) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 21181:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE RELAXED ELASTIC MODULUS (ISO 21181:2013) |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| VDI/VDE 2624 Blatt 2.1:2008-12 | Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems |
| DIN V 105-100:2005-10 | CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN EN ISO 16841:2014-07 | STEEL WIRE ROPES - PULLING EYES FOR ROPE INSTALLATION - TYPES AND MINIMUM REQUIREMENTS (ISO 16841:2014) |
| DIN ISO 10275:2009-06 | METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
| DIN EN ISO 7500-1 Beiblatt 3:1999-11 | METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES; VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM; GENERAL FOR REQUIREMENTS, VERIFICATION AND CALIBRATION OF FATIGUE TESTING MACHINES |
| DIN 51220:2003-08 | General requirements for materials testing machines, including verification and calibration |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| DIN EN ISO 21180:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE MAXIMUM TENSILE STRENGTH (ISO 21180:2013) |
| DIN EN ISO 14544:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
| DIN V 18153:2003-10 | CONCRETE MASONRY UNITS (NORMAL-WEIGHT CONCRETE) |
| DIN EN ISO 6892-3:2015-07 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| DIN HDBK 205 : 5ED 2006 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 3 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMABHAENGIG); SCHWEISSVERBINDUNGEN, METALLKLEBUNGEN |
| DIN EN ISO 10275:2014-08 | METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
| DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
| DIN EN ISO 10748:2011-06 | Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| DIN ISO 16237:2015-11 | MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR CROSS-TENSION TESTING OF SINGLE JOINTS (ISO 16237:2015) |
| DIN V 105-1:2002-06 | CLAY MASONRY UNITS - PART 1: SOLID UNITS AND VERTICALLY PERFORATED UNITS OF BULK DENSITY CLASSES >= 1.2 |
| DIN HDBK 118/4 : 4ED 2013 | PAPIER, PAPPE UND FASERSTOFF 4 - DIN EN ISO 186 BIS DIN EN ISO 15755 SOWIE DIN EN 20187 BIS DIN EN 27213 |
| DIN EN ISO 15630-3:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| DIN EN ISO 9187-1:2011-01 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| DIN EN ISO 2740:2009-10 | Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009) |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 2439:2009-05 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 13935-1:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| DIN EN ISO 12236:2006-11 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| DIN EN ISO 12737:2011-04 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
| DIN EN ISO 21182:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
| DIN EN ISO 9856:2016-06 (Draft) | CONVEYOR BELTS - DETERMINATION OF ELASTIC AND PERMANENT ELONGATION AND CALCULATION OF ELASTIC MODULUS (ISO 9856:2016) |
| DIN V 18151:2003-10 | LIGHTWEIGHT HOLLOW BLOCKS |
| DIN HDBK 19 : 17ED 2015 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
| DIN EN ISO 8362-7:2011-03 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
| DIN EN ISO 10734:2016-10 | FOOTWEAR - TEST METHOD FOR SLIDE FASTENERS - STRENGTH OF SLIDE FASTENER PULLERS (ISO 10734:2016) |
| DIN EN ISO 26203-1:2010-06 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| DIN 14920:2010-10 | LINES FOR FIRE-BRIGADES - REQUIREMENTS, TEST METHODS, MAINTENANCE |
| DIN EN ISO 12996:2013-10 | MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR TENSILE SHEAR TESTING OF SINGLE JOINTS (ISO 12996:2013) |
| DIN V 106-1:2003-02 | CALCIUM SILICATE UNITS - PART 1: SOLID UNITS, PERFORATED UNITS, SOLID BLOCKS, PERFORATED BLOCKS, HIGH PRECISION UNITS, HIGH PRECISION ELEMENTS, CHAMFERED UNITS, SLABS, SHAPED UNITS |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| DIN EN ISO 25619-2:2015-12 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
| DIN 488-6:2010-01 | Reinforcing steel - Part 6: Assessment of conformity |
| DIN EN ISO 14916:2015-09 (Draft) | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| DIN EN ISO 3377-2:2016-07 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TEAR LOAD - PART 2: DOUBLE EDGE TEAR (ISO 3377-2:2016) |
| DIN EN ISO 3377-1:2012-03 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
| DIN EN ISO 14801:2008-02 | DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
| DIN EN ISO 23910:2008-01 | LEATHER - PHYSICAL AND MECHANICAL TESTS - MEASUREMENT OF STITCH TEAR RESISTANCE (ISO 23910:2017) |
| DIN EN ISO 6892:2007-05 (Draft) | METALLIC MATERIALS - TENSILE TESTING - METHOD OF TESTING AT AMBIENT TEMPERATURE |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
US$94.05
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.