DIN EN ISO 9906 E : 2013
Current
Current
The latest, up-to-date edition.
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and subscripts
4 Pump measurements and acceptance criteria
5 Test procedures
6 Analysis
Annex A (normative) - Test arrangements
Annex B (informative) - NPSH test arrangements
Annex C (informative) - Calibration intervals
Annex D (informative) - Measurement equipment
Annex E (informative) - Tests performed on the
entire equipment set - String test
Annex F (informative) - Reporting of test results
Annex G (informative) - Special test methods
Annex H (informative) - Witnessed pump test
Annex I (informative) - Conversion to SI units
Annex J (informative) - Measurement uncertainty
for NPSH test
Bibliography
Defines hydraulic performance tests for customers' acceptance of rotodynamic pumps (centrifugal, mixed flow and axial pumps, hereinafter "pumps").
| DevelopmentNote |
Supersedes DIN 1944 E (05/2003)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| ISO 9906:2012 | Identical |
| NBN EN ISO 9906 : 2012 | Identical |
| NEN EN ISO 9906 : 2012 | Identical |
| NS EN ISO 9906 : 2012 | Identical |
| I.S. EN ISO 9906:2012 | Identical |
| SN EN ISO 9906 : 2012 | Identical |
| UNI EN ISO 9906 : 2012 | Identical |
| BS EN ISO 9906:2012 | Identical |
| EN ISO 9906:2012 | Identical |
| NF EN ISO 9906 : 2012 | Identical |
| ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 748:2007 | Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
| ISO 6416:2017 | Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method |
| ISO 4373:2008 | Hydrometry Water level measuring devices |
| ISO 2975-3:1976 | Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers |
| ISO/TR 17766:2005 | Centrifugal pumps handling viscous liquids — Performance corrections |
| ISO 3354:2008 | Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
| IEC 60051-7:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7: Special requirements for multi-function instruments |
| ISO 2975-7:1977 | Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers |
| ISO 2975-1:1974 | Measurement of water flow in closed conduits — Tracer methods — Part 1: General |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
| IEC 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| ISO 2975-6:1977 | Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers |
| IEC 60041:1991 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
| IEC 60051-2:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| ISO 8316:1987 | Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank |
| ISO 17769-1:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps |
| IEC 60051-5:1985 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes |
| ISO 6817:1992 | Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| ISO 9213:2004 | Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil |
| ISO 3846:2008 | Hydrometry Open channel flow measurement using rectangular broad-crested weirs |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 17769-2:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system |
| ISO 2537:2007 | Hydrometry — Rotating-element current-meters |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| IEC 60034-2-2:2010 | Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
| ISO 7194:2008 | Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
| IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
| ISO 5198:1987 | Centrifugal, mixed flow and axial pumps Code for hydraulic performance tests Precision grade |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| ISO 2186:2007 | Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 9104:1991 | Measurement of fluid flow in closed conduits Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| ISO 1438:2017 | Hydrometry — Open channel flow measurement using thin-plate weirs |
| ISO 2975-2:1975 | Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers |
US$176.32
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.