• There are no items in your cart

DIN ISO 23529:2012-10

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010)
Available format(s)

Hardcopy , PDF

Superseded date

10-28-2020

Language(s)

English, German

Published date

10-01-2012

Nationales Vorwort
Nationaler Anhang NA (informativ) Literaturhinweise
1 Anwendungsbereich
2 Identifikation und Berichtswesen
3 Standard-Laborbedingungen
  3.1 Standard-Labortemperatur
  3.2 Standard-Luftfeuchtigkeit im Labor
  3.3 Weitere Bedingungen
4 Lagerung von Mustern und Probekörpern
5 Herstellung von Probekörpern
  5.1 Probekörperdicke
  5.2 Einstellen der Dicke
  5.3 Probekörper-Schneidgeräte
  5.4 Wartung der Schneidvorrichtungen
  5.5 Herstellung von Probekörpern durch Heizen
6 Konditionierung
  6.1 Allgemeines
  6.2 Konditionierungsdauer für niedere oder erhöhte
      Temperaturen
7 Messung der Probekörpermasse
  7.1 Verfahren A - Für Masse < 30 mm
  7.2 Verfahren B - Für Masse => 30 mm und <= 100 mm
  7.3 Verfahren C - Für Masse > 100 mm
  7.4 Verfahren D - Berührungsloses Verfahren
8 Versuchsbedingungen
  8.1 Dauer des Versuchs
  8.2 Temperatur und Feuchtigkeit
9 Prüfkammern
  9.1 Allgemeine Bestimmungen für temperaturkontrollierte
      Kammern
  9.2 Kammern für die Messung bei erhöhten Temperaturen
  9.3 Kammern für die Messung bei niederen Temperaturen
10 Prüfbericht
Anhang A (normativ) Heizzeiten für Probekörper aus Elastomer

This standard is included in DIN Handbook 479.

Committee
TC 45
DevelopmentNote
Supersedes DIN 53534, DIN ISO 471 and DIN ISO 4661-1. (01/2007)
DocumentType
Test Method
Pages
20
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
Supersedes

Standards Relationship
ISO 23529:2016 Identical
ISO 23529:2010 Identical

DIN ISO 4649:2014-03 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
DIN ISO 27588:2014-12 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012)
DIN 45673-1:2010-08 Mechanical vibration - Resilient elements used in railway tracks - Part 1: Terms and definitions, classification, test procedures
DIN HDBK 479 : 2ED 2017 KAUTSCHUK UND ELASTOMERE - PHYSIKALISCHE UND CHEMISCHE PRUEFVERFAHREN
DIN ISO 13226:2015-12 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
DIN EN ISO 16012:2016-02 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
DIN ISO 132:2015-06 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF FLEX CRACKING AND CRACK GROWTH (DE MATTIA) (ISO 132:2011)
DIN EN ISO 10619-1:2012-03 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011)
DIN EN ISO 3386-1:2015-10 POLYMERIC MATERIALS, CELLULAR FLEXIBLE - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 1: LOW-DENSITY MATERIALS (ISO 3386-1:1986 + AMD 1:2010)
DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
DIN 53579:2015-04 TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS
DIN EN ISO 16012 E : 2016 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
DIN 7795:2015-02 Measuring compression set of elastomers in hot water
DIN EN ISO 10619-2:2012-03 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011)
DIN EN ISO 7233:2015-10 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016)
DIN EN ISO 1402:2010-04 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
DIN EN 13832-1:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
DIN ISO 815-2:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014)
DIN ISO 812:2015-06 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2011)
DIN ISO 1827:2010-07 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS
DIN ISO 2285:2013-12 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)
DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
DIN ISO 34-1:2016-09 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015)
DIN EN ISO 6808:2014-10 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
DIN EN 455-2:2015-07 MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES
DIN EN ISO 3994:2015-11 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN ISO 48:2016-09 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)
DIN EN ISO 7326:2015-10 (Draft) RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016)
DIN ISO 7743:2016-08 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011)
DIN ISO 815-1:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014)
DIN EN ISO 2439:2009-05 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE)
DIN ISO 3384-1:2015-12 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
DIN EN ISO 8307:2008-03 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION

ISO 525:2013 Bonded abrasive products General requirements
DIN ISO 3302-1:2016-10 (Draft) RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
ISO 3302-1:2014 Rubber — Tolerances for products — Part 1: Dimensional tolerances
DIN ISO 525:2015-02 Bonded abrasive products - General requirements (ISO 525:2013)
ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures

View more information
US$109.01
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.