DIN EN ISO 1478:1999-12
|
Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
|
ISO 272:1982
|
Fasteners — Hexagon products — Widths across flats
|
ISO 8839:1986
|
Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals
|
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
|
DIN EN ISO 2320:2016-05
|
FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
|
ISO 898-7:1992
|
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
ISO 10683:2014
|
Fasteners Non-electrolytically applied zinc flake coatings
|
ISO 885:2000
|
General purpose bolts and screws — Metric series — Radii under the head
|
ISO 10684:2004
|
Fasteners — Hot dip galvanized coatings
|
ISO 4042:1999
|
Fasteners Electroplated coatings
|
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
|
ISO 6157-3:1988
|
Fasteners Surface discontinuities Part 3: Bolts, screws and studs for special requirements
|
ISO 965-5:1998
|
ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
|
ISO 4753:2011
|
Fasteners Ends of parts with external ISO metric thread
|
DIN EN ISO 16426:2003-06
|
FASTENERS - QUALITY ASSURANCE SYSTEM
|
DIN EN ISO 7085:2000-01
|
MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
|
ISO 4759-1:2000
|
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
|
ISO 6157-1:1988
|
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
|
DIN EN ISO 3269:2000-11
|
FASTENERS - ACCEPTANCE INSPECTION
|
DIN EN ISO 4759-1:2001-04
|
TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
|
ISO 2320:2015
|
Fasteners Prevailing torque steel nuts Functional properties
|
ISO 7721:1983
|
Countersunk head screws — Head configuration and gauging
|
ISO 16426:2002
|
Fasteners — Quality assurance system
|
DIN EN ISO 3506-4:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
|
ISO 7085:1999
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
ISO 10666:1999
|
Drilling screws with tapping screw thread — Mechanical and functional properties
|
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
|
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
|
ISO 965-2:1998
|
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
|
DIN EN ISO 3506-1:2010-04
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
|
ISO 898-6:1994
|
Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread
|
ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
|
ISO 3508:1976
|
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
|
ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
|
ISO 3506-4:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws
|
ISO 965-4:1998
|
ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
|
DIN EN ISO 3506-2:2010-04
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
|
DIN ISO 965-1:2017-05
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
|
ISO 16048:2003
|
Passivation of corrosion-resistant stainless-steel fasteners
|
ISO 888:2012
|
Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
|
ISO 4755:1983
|
Fasteners — Thread undercuts for external metric ISO threads
|
ISO 6157-2:1995
|
Fasteners Surface discontinuities Part 2: Nuts
|
DIN EN ISO 10666:2000-02
|
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999
|
ISO 965-1:2013
|
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
|
ISO 2702:2011
|
Heat-treated steel tapping screws — Mechanical properties
|
DIN EN 20898-7:1995-04
|
MECHANICAL PROPERTIES OF FASTENERS - PART 7: TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM
|
ISO 10664:2014
|
Hexalobular internal driving feature for bolts and screws
|
ISO 965-3:1998
|
ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
|
DIN EN ISO 10683:2016-07 (Draft)
|
FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
|
ISO 1478:1999
|
Tapping screws thread
|
ISO 4757:1983
|
Cross recesses for screws
|
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
|
DIN EN 26157-1:1991-12
|
FASTENERS - SURFACE DISCONTINUITIES - BOLTS, SCREWS AND STUDS SUBJECT FOR GENERAL REQUIREMENTS
|
DIN EN ISO 10684:2011-09
|
Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008)
|
ISO 3269:2000
|
Fasteners Acceptance inspection
|
ISO 7378:1983
|
Fasteners — Bolts, screws and studs — Split pin holes and wire holes
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|