EI/JIG 1530 : 2013

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS

Publisher: Energy Institute (formerly Institute of Petroleum - IP)

Published: 01-01-2013

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Legal notices and disclaimers
Foreword
Acknowledgements
1 Introduction, scope, application and important definitions
2 Aviation fuel quality assurance and traceability
3 Management of change/new processes
4 Sampling and testing of aviation fuel
5 Laboratories
6 Refineries: Manufacture
7 Additives used in aviation fuels
8 Receipt, batching, certification and release
9 Finished product: Storage design features and handling
procedures
10 Transportation: Facilities and procedures
11 Synthetic jet fuel
Annexes
Annex A - Authorised signatories
Annex B - Example certificates
Annex C - Long term storage and return to use
Annex D - Equipment/installation pre-conditioning prior to use
with aviation fuel
Annex E - Data integrity management flow charts
Annex F - Requirements for and calibration of field equipment
Annex G - Salt dryers and bulk water removal at refineries
Annex H - Clay treaters
Annex I - Jet fuel conductivity
Annex J - Unit conversion factors
Annex K - Glossary of terms and abbreviations
Annex L - Referenced publications
Annex M - Implementing EI/JIG 1530 and how to claim conformance

Abstract - (Show below) - (Hide below)

Specifies mandatory provisions and good practice recommendations for maintaining aviation fuel quality in refineries and in storage, distribution and transport systems including those delivering to airports, covering: - facilities design and construction; - product manufacture; - batching; - testing; - release; - storage and handling; - receipt and discharge; - quality assurance requirements, and - operational procedures.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Superseded
Publisher	Energy Institute (formerly Institute of Petroleum - IP)
Pages
ISBN
Superseded By	EI/JIG 1530 : 2019

Standards Referenced By This Book - (Show below) - (Hide below)

ICAO 9977 : 2012	MANUAL ON CIVIL AVIATION JET FUEL SUPPLY
DEFSTAN 91-91/8(2016) : 2016	TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR
MIL STD 3004 : D	QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS
EI 1585 : 2013	GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS
EI HM 50 : 2017	GUIDELINES FOR THE CLEANING OF TANKS AND LINES FOR MARINE TANK VESSELS CARRYING PETROLEUM AND REFINED PRODUCTS
ASTM D 6615 : 2015-08	SPECIFICATION FOR JET B WIDE-CUT AVIATION TURBINE FUEL
DEFSTAN 91-091/9(2016) : 2016	TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR
EI 1550 : 2014	HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL
ASTM D 1655 : 2018-01	SPECIFICATION FOR AVIATION TURBINE FUELS
ASTM D 7566 : 2017-07	SPECIFICATION FOR AVIATION TURBINE FUEL CONTAINING SYNTHESIZED HYDROCARBONS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 3171 : 1988(R2004)	PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING
API MPM CH17.6 : 2014	MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.6: GUIDELINES FOR DETERMINING THE FULLNESS OF PIPELINES BETWEEN VESSELS AND SHORE TANKS
ASTM D 5001 : 2010	TEST METHOD FOR MEASUREMENT OF LUBRICITY OF AVIATION TURBINE FUELS BY THE BALL-ON-CYLINDER LUBRICITY EVALUATOR (BOCLE)
ISO/IEC 17025 : 2005	GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
EI 1529 : 2015	AVIATION FUELLING HOSE AND HOSE ASSEMBLIES
ASTM D 7524:2010	TEST METHOD FOR DETERMINATION OF STATIC DISSIPATER ADDITIVES (SDA) IN AVIATION TURBINE FUEL AND MIDDLE DISTILLATE FUELS - HIGH PERFORMANCE LIQUID CHROMATOGRAPH (HPLC) METHOD
EI 1550 : 2014	HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL
ASTM D 5452 : 2012 : REDLINE	Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
MIL DTL 5624 : W	TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
IP 585 : 2015	DETERMINATION OF FATTY ACID METHYL ESTERS (FAME), DERIVED FROM BIO-DIESEL FUEL, IN AVIATION TURBINE FUEL - GC-MS WITH SELECTIVE ION MONITORING/SCAN DETECTION METHOD
IP 274 : 2015	DETERMINATION OF ELECTRICAL CONDUCTIVITY OF AVIATION AND DISTILLATE FUELS
IP 289 : 2015	DETERMINATION OF WATER REACTION OF AVIATION FUELS
ASTM D 4177 : 2016-12	PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS
ISO 1825 : 2010	RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
ISO 3170 : 2004(R2007)	PETROLEUM LIQUIDS - MANUAL SAMPLING
IP 439 : 2015	PETROLEUM PRODUCTS - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD
IP 559 : 2015	DETERMINATION OF DENSITY OF MIDDLE DISTILLATE FUELS - HAND HELD OSCILLATING U-TUBE DENSITY METER METHOD
ASTM D 2276 : 2006	TEST METHOD FOR PARTICULATE CONTAMINANT IN AVIATION FUEL BY LINE SAMPLING
ASTM D 6792 : 2017 : REDLINE	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
IP 590 : 2015	DETERMINATION OF FATTY ACID METHYL ESTERS (FAME) IN AVIATION TURBINE FUEL - HPLC EVAPORATIVE LIGHT SCATTERING DETECTOR METHOD
ASTM D 4171 : 2016-07	SPECIFICATION FOR FUEL SYSTEM ICING INHIBITORS
EI 1590 : 2014	SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION FUEL MICROFILTERS
ASTM D 4057 : 2013-10	PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS
EI MODEL CODE SAFE PRACTICE PT16 : 2017	MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING
ASTM D 4054 : 2016-08	PRACTICE FOR QUALIFICATION AND APPROVAL OF NEW AVIATION TURBINE FUELS AND FUEL ADDITIVES
ICAO 9977 : 2012	MANUAL ON CIVIL AVIATION JET FUEL SUPPLY
EI 1596 : 2013	DESIGN AND CONSTRUCTION OF AVIATION FUEL FILTER VESSELS
ASTM D 4306 : 2015 : REDLINE	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ISO 31000 : 2009	RISK MANAGEMENT - GUIDELINES
ASTM D 1094 : 2007	TEST METHOD FOR WATER REACTION OF AVIATION FUELS
ANSI MH2 : 2004	STEEL DRUMS AND PAILS
IP 170 : 2015	DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
EI 1581 : 2016	SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS
IP 189/190 : 2015	CRUDE PETROLEUM AND LIQUID OR SOLID PETROLEUM PRODUCTS - DETERMINATION OF DENSITY OR RELATIVE DENSITY - CAPILLARY-STOPPERED PYKNOMETER AND GRADUATED BICAPILLARY PYKNOMETER METHODS
ABS 0131 : 2004 COR 2012	GUIDE FOR INERT GAS SYSTEM FOR BALLAST TANKS
EI 1583 : 2010	LABORATORY TESTS AND MINIMUM PERFORMANCE LEVELS FOR AVIATION FUEL FILTER MONITORS
ASTM D 2887 : 2016-05	TEST METHOD FOR BOILING RANGE DISTRIBUTION OF PETROLEUM FRACTIONS BY GAS CHROMATOGRAPHY
ASTM D 4952 : 2012	TEST METHOD FOR QUALITATIVE ANALYSIS FOR ACTIVE SULFUR SPECIES IN FUELS AND SOLVENTS (DOCTOR TEST)
IP 216 : 2015	DETERMINATION OF PARTICULATE CONTAMINANT OF AVIATION TURBINE FUELS BY LINE SAMPLING
API 2003 : 2015	PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
API/EI 1595 : 2012	DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF AVIATION PRE-AIRFIELD STORAGE TERMINALS
ASTM D 156 : 2015 : REDLINE	Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ASTM D 86 : 2017-06	TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
IP 123 : 2015	PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
MIL PRF 25017 : H	INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747)
IP 423 : 2015	DETERMINATION OF PARTICULATE CONTAMINANT IN AVIATION TURBINE FUELS BY LABORATORY FILTRATION
ASTM D 56 : 2016-07	TEST METHOD FOR FLASH POINT BY TAG CLOSED CUP TESTER
EI 1541 : 2009	REQUIREMENTS FOR INTERNAL PROTECTIVE COATING SYSTEMS USED IN AVIATION FUEL HANDLING SYSTEMS
EI HM 50 : 2017	GUIDELINES FOR THE CLEANING OF TANKS AND LINES FOR MARINE TANK VESSELS CARRYING PETROLEUM AND REFINED PRODUCTS
ASTM D 381 : 2012	TEST METHOD FOR GUM CONTENT IN FUELS BY JET EVAPORATION
ASTM D 910 : 2017-05	SPECIFICATION FOR LEADED AVIATION GASOLINES
JIG 1 : ISSUE 11	AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR INTO-PLANE FUELLING SERVICES
ASTM D 4176:2004	TEST METHOD FOR FREE WATER AND PARTICULATE CONTAMINATION IN DISTILLATE FUELS (VISUAL INSPECTION PROCEDURES)
ASTM D 2624 : 2015 : REDLINE	Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ISO 6297 : 1997(R2013)	PETROLEUM PRODUCTS - AVIATION AND DISTILLATE FUELS - DETERMINATION OF ELECTRICAL CONDUCTIVITY
EI 1542 : 2012	IDENTIFICATION MARKINGS FOR DEDICATED AVIATION FUEL MANUFACTURING AND DISTRIBUTION FACILITIES, AIRPORT STORAGE AND MOBILE FUELLING EQUIPMENT
DEFSTAN 91-91/7(2011) : 2011	TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR
ASTM D 5854 : 1996	PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013	DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS
ASTM D 3241 : 2017-11	TEST METHOD FOR THERMAL OXIDATION STABILITY OF AVIATION TURBINE FUELS
ISO 15750-2 : 2002(R2014)	PACKAGING - STEEL DRUMS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 212 L, 216,5 L AND 230 L
IP 139 : 2015	PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF ACID OR BASE NUMBER - COLOUR-INDICATOR TITRATION METHOD
ASTM D 3948 : 2015-01	TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS BY PORTABLE SEPAROMETER
IP 568 : 2015	DETERMINATION OF THE STATIC DISSIPATER ADDITIVES (SDA) IN AVIATION TURBINE FUEL AND MIDDLE DISTILLATE FUELS - HPLC METHOD
EI 1582 : 2011	SPECIFICATION FOR SIMILARITY FOR EI 1581 AVIATION JET FUEL FILTER/WATER SEPARATORS
ISO 4259 : 2006	PETROLEUM PRODUCTS - DETERMINATION AND APPLICATION OF PRECISION DATA IN RELATION TO METHODS OF TEST
DEFSTAN 91-86/6(2009) : 2009	TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII
ASME B31.4 : 2016	PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
EI TP GUID. PETROLEUM LABORATORIES : 1ED 2010	GUIDANCE ON DEVELOPMENT, IMPLEMENTATION AND IMPROVEMENT OF QUALITY SYSTEMS IN PETROLEUM LABORATORIES
MIL DTL 83133 : J	TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
IP 406 : 2015	PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY
ISO 9001:2015	QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
ASTM D 7566 : 2017-07	SPECIFICATION FOR AVIATION TURBINE FUEL CONTAINING SYNTHESIZED HYDROCARBONS
ABS 0024 : 1980	GUIDANCE MANUAL FOR MATERIAL SELECTION AND INSPECTION OF INERT GAS SYSTEMS
IP 583 : 2015	DETERMINATION OF THE FATTY ACID METHYL ESTERS CONTENT OF AVIATION TURBINE FUEL USING FLOW ANALYSIS BY FOURIER TRANSFORM INFRARED SPECTROSCOPY - RAPID SCREENING METHOD
IP 540 : 2015	DETERMINATION OF THE EXISTENT GUM CONTENT OF AVIATION TURBINE FUEL - JET EVAPORATION METHOD
DEFSTAN 91-87/6(2009) : 2009	TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII
JIG 2 : ISSUE 11	AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR AIRPORT DEPOTS & HYDRANTS
IP 323 : 2015	DETERMINATION OF THERMAL OXIDATION STABILITY OF GAS TURBINE FUELS
ASTM D 5842 : 2017	Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
JIG 3 : ISSUE 11	AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR SUPPLY & DISTRIBUTION FACILITIES
IP 356 : 2015	CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD
DEFSTAN 68-251/3(2007) : 2007	FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61
ICAO 9284 : 2015 COR 1 2015	TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF DANGEROUS GOODS BY AIR
IP 438 : 2015	PETROLEUM PRODUCTS - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD
ASTM D 1655 : 2017-08	SPECIFICATION FOR AVIATION TURBINE FUELS
API 1110 : 2013(R 2018)	RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE
DEFSTAN 68-252/3(2005) : 2005	FUEL SYSTEM ICING INHIBITOR NATO CODE: S-1745 JOINT SERVICE DESIGNATION: AL-41
EI 1540 : 2014	DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES
API 1543 : 2009	DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT
EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013	MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY
ASTM D 5006 : 2011	TEST METHOD FOR MEASUREMENT OF FUEL SYSTEM ICING INHIBITORS (ETHER TYPE) IN AVIATION FUELS
EI HM 66 : 2016	GUIDELINES FOR THE BLENDING OF LIQUID HYDROCARBON CARGOES ON BOARD TANK VESSELS

Add To Cart

Product Format

Quantity

add to cart

EI/JIG 1530 : 2013

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?