• There are no items in your cart

EN 10109-1 : 1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

METALLIC MATERIALS - HARDNESS TEST - PART 1: ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T)
Superseded date

09-01-1999

Published date

01-12-2013

Foreword
0 Introduction
1 Scope
2 Normative references
3 Principle
4 Symbols and designations
5 Apparatus
6 Test piece
7 Procedures
8 Test report
Annex A (normative) Minimum thickness of the test piece
         in relation to the Rockwell hardness
Annex B (normative) Corrections to be added to Rockwell
         hardness values obtained on convex cylindrical
         surfaces
Annex C (normative) Corrections to be added to Rockwell
         hardness C scale values obtained on spherical
         test surfaces of various diameters
Annex D (normative) Conventional HR30Tm test for thin
         products

Specifies the method for Rockwell and Rockwell superficial hardness tests for metallic materials.

Committee
ECISS/TC 1A
DevelopmentNote
Supersedes EURONORM 4 and EURONORM 109 (06/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
BS EN 10109-2:1996 Metallic materials. Hardness test Verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
EN 10254:1999 Steel closed die forgings - General technical delivery conditions
EN 10109-2 : 1994 METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance
EN 12797:2000/A1:2003 BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
EN 10109-3 : 1994 METALLIC MATERIALS - HARDNESS OF TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
EN 10090:1998 Valve steels and alloys for internal combustion engines
DD ENV 13797:2001 Corrosion protection. Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production. Materials and test methods. Guidelines
02/707773 DC : 0 BS 7586-1 - COMBINATION WRENCHES - PART 1: UNIFIED SIZES
BS EN 12797:2000 Brazing. Destructive tests of brazed joints
BS EN 10202:2001 Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
BS EN 10109-3:1996 Metallic materials. Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
VDI 3824 Blatt 4:2001-08 Quality assurance of PVD and CVD hard coating - Inspection planning of hard coatings
I.S. EN 10109-2:1995 METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
99/701054 DC : DRAFT JAN 1999 PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10132-1:2000 COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 12797:2000-12 Brazing - Destructive tests of brazed joints; English version of DIN EN 12797
DIN EN 12980:2015-02 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance
BS EN 12980:2000 Materials and articles in contact with foodstuffs. Non-metallic articles for catering and industrial use. Method of test for the determination of impact resistance
DIN EN 10202:2001-07 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; English version of DIN EN 10202
BS EN 10090:1998 Valve steels and alloys for internal combustion engines
I.S. EN 10109-3:1995 METALLIC MATERIALS - HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
97/703009 DC : 0 PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
BS EN 10254:1999 Steel closed die forgings. General technical delivery conditions
EN 10202:2001/AC:2003 COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL

EN 10109-2 : 1994 METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
EN 24498-1 : 1993 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS
ISO 3738-1:1982 Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.