• There are no items in your cart

EN 10149-3:2013

Current
Current

The latest, up-to-date edition.

Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
Published date

09-25-2013

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Dimensions, mass and tolerances
6 Classification and designation
7 Technical requirements
8 Inspection and testing
9 Marking
10 Disputes
11 Options
Annex A (normative) - Location of test pieces
Annex B (informative) - Minimum inside bend radii for
        cold forming
Bibliography

This European Standard, in addition to EN 10149-1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming.The grades are given in Table 1 (chemical composition) and Table 2 (mechanical properties) and are supplied in the normalised or normalised rolled delivery condition as given in 7.2.The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of ≥ 1,5 mm and ≤ 20 mm.

Committee
CEN/TC 459/SC 3
DevelopmentNote
Supersedes PREN 10149-3. (10/2013)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
17/30348213 DC : 0 BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10149-1:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
09/30156692 DC : 0 BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
06/30148769 DC : 0 EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS
PREN 10051 : DRAFT 2009 HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
UNE-EN 1994-1-1:2013 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
BS EN 1993-4-2 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
EN 1993-4-2:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
DIN EN 1994-1-1:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
BS EN 10249-1:1996 Cold formed sheet piling of non alloy steels Technical delivery conditions
BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
CEN/TS 13001-3-1:2004/AC:2006 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
DD CEN/TS 13001-3-1 : 2004 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
09/30200092 DC : 0 BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 10029 : DRAFT 2009 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
I.S. EN 1993-4-2:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
UNE-EN 1994-2:2013 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
I.S. CEN TS 13001-3-1:2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10029:2010 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 1994-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1994-1-1:2005 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
UNI EN 10029 : 2011 Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
17/30348210 DC : 0 BS ISO 19426-3 - STRUCTURES FOR MINE SHAFTS - PART 3: SINKING STAGES
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
UNI CEN/TS 13001-3-1 : 2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
08/30181655 DC : DRAFT SEP 2008 BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
CEN/TR 10347:2006 Guidance for forming of structural steels in processing
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1993-4-1:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
DIN EN 1994-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
UNI EN 1994-2 : 2006 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
UNI EN 1993-1-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
UNI EN 10051 : 2011 CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 1994-1-1 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNI EN 10149-1 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
98/705399 DC : DRAFT MAR 1998 PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
DIN EN 10152:2015-10 (Draft) ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 1993-4-2:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
ISO 19426-4:2018 Structures for mine shafts — Part 4: Conveyances
I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges
UNE-EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings
UNE-EN 10149-1:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
BS EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
I.S. EN 1993-1-3:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX)
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
07/30164617 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PD 6588:1996 Welding. Guidelines for a grouping system for welding purposes
DD CEN/TR 10347:2006 Guidance for forming of structural steels in processing
ISO 19426-3:2018 Structures for mine shafts — Part 3: Sinking stages
PREN 10219-2 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
16/30332614 DC : 0 BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
I.S. CEN TR 10347:2006 GUIDANCE FOR FORMING OF STRUCTURAL STEELS IN PROCESSING
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape

EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 10020:2000 Definition and classification of grades of steel
CEN/TR 10347:2006 Guidance for forming of structural steels in processing
ISO 14713-2:2009 Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
EN ISO 14713-2:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.