EN 1015-11 : 1999 AMD 1 2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
Superseded date
11-21-2019
Published date
01-12-2013
Publisher
Foreword
1 Scope
2 Normative references
3 Principle
4 Definitions and symbols
5 Apparatus
6 Sampling
7 Preparation and storage of test specimens
8 Determination of flexural strength
9 Determination of compressive strength
10 Test report
Annex A (normative) Description of metal moulds for specimen
preparation
Annex B (informative) Suggested loading rates for different
classes of masonry and rendering mortars
Defines a procedure to determine flexural and compressive strength of samples of moulded mortars.
| Committee |
TC 125
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 1015-11:2000 | Identical |
| NF EN 1015-11 : 2000 AMD 1 2007 | Identical |
| NEN EN 1015-11 : 1999 AMD 1 2007 | Identical |
| PN EN 1015-11 : 2001 AMD 1 2007 | Identical |
| SN EN 1015-11 : 1999 AMD 1 2006 | Identical |
| UNI EN 1015-11 : 2007 | Identical |
| BS EN 1015-11:1999 | Identical |
| NBN EN 1015-11 : 1999 AMD 1 2007 | Identical |
| NS EN 1015-11 : 2000 AMD 1 2006 | Identical |
| DIN EN 1015-11:2007-05 | Identical |
| UNE-EN 1015-11:2000 | Identical |
| ONORM EN 1015-11 : 2007 | Identical |
| BS EN 846-14:2012 | Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
| 07/30166977 DC : DRAFT AUG 2007 | BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNE-EN 1996-2:2011 | Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry |
| I.S. EN 14944-3:2007 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| 15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| UNE-EN 846-14:2013 | Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
| BS EN 1015-12:2016 | Methods of test for mortar for masonry Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
| BS EN 1052-3:2002 | Methods of test for masonry Determination of initial shear strength |
| BS EN 846-8:2000 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
| BS EN 998-1:2016 | Specification for mortar for masonry Rendering and plastering mortar |
| BS EN 1996-2:2006 | Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry |
| BS EN 1015-18:2002 | Methods of test for mortar for masonry Determination of water absorption coefficient due to capillary action of hardened mortar |
| EN 1015-18:2002 | Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar |
| EN 1052-4:2000 | Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
| EN 1052-5:2005 | Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
| EN 13084-5:2005/AC:2006 | FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
| EN 1015-12:2016 | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
| EN 1052-2:2016/AC:2017 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
| I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| 10/30212141 DC : 0 | BS EN 846-14 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: LINTELS |
| UNI EN 846-14 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
| 02/102876 DC : DRAFT APR 2002 | PREN 1052-5 - METHODS OF TEST FOR MASONRY - PART 5: DETERMINATION OF BOND STRENGTH BY THE BOND WRENCH METHOD |
| DIN EN 934-3:2012-09 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling (includes Amendment A1:2012) |
| DIN EN 1015-10:2007-05 | Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar (includes Amendment A1:2006) |
| BS EN 772-1 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| BS EN 13084-5:2005 | Free-standing chimneys Material for brick liners. Product specifications |
| BS EN 1052-5:2005 | Methods of test for masonry Determination of bond strength by the bond wrench method |
| I.S. EN 772-1:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| DIN EN 1996-1-1:2013-02 | Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012) |
| DIN EN 1052-5:2005-06 | Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
| DIN EN 1052-3:2007-06 | Methods of test for masonry - Part 3: Determination of initial shear strength (includes Amendment A1:2007) |
| I.S. EN 846-7:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| I.S. EN 1052-2:2016 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
| DIN EN 772-1:2000-09 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN 998-1:2016 | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| I.S. EN 998-2:2016 | SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
| I.S. EN 846-9:2016 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 9: DETERMINATION OF FLEXURAL RESISTANCE AND SHEAR RESISTANCE OF LINTELS |
| I.S. EN 846-5:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| I.S. EN 1015-12:2016 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 12: DETERMINATION OF ADHESIVE STRENGTH OF HARDENED RENDERING AND PLASTERING MORTARS ON SUBSTRATES |
| DIN EN 1052-2:2016-08 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
| I.S. EN 934-3:2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
| I.S. EN 1996-1-1:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1744-1:2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| I.S. EN 1996-2:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY (INCLUDING IRISH NATIONAL ANNEX) |
| 93/102674 DC : 0 | PREN 1015-13 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 13: DETERMINATION OF DIMENSIONAL STABILITY OF HARDENED MORTARS |
| DIN EN 846-14:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
| 09/30180272 DC : 0 | BS EN 934-3 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| DIN EN 14944-3:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| DIN EN 1744-1:2013-03 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| DIN EN 13084-5:2005-12 | Free-standing chimneys - Part 5: Material for brick liners - Product specifications |
| DIN EN 1996-2:2010-12 | Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009) |
| DIN EN 1996-3:2010-12 | Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009) |
| BS EN 1052-4:2000 | Methods of test for masonry Determination of shear strength including damp proof course |
| BS EN 846-9:2016 | Methods of test for ancillary components for masonry Determination of flexural resistance and shear resistance of lintels |
| DIN EN 14944-3:2009-01 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products |
| UNE-EN 846-5:2013 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| EN 772-6 : 2001 | Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units |
| UNI EN 13084-5 : 2005 | FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
| UNI EN 1744-1 : 2013 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNI EN 846-7 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| UNI EN 846-5 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| UNI EN 1052-4 : 2001 | METHODS OF TEST FOR MASONRY - DETERMINATION OF SHEAR STRENGTH INCLUDING DAMP PROOF COURSE |
| UNI EN 1996-2 : 2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| UNI EN 934-3 : 2012 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
| UNI EN 1996-1-1 : 2013 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| I.S. EN 1996-3:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| 10/30211862 DC : 0 | BS EN 998-1 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| 04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| I.S. EN 846-14:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| DIN EN 998-1:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| BS EN 1052-2:2016 | Methods of test for masonry Determination of flexural strength |
| UNE-EN 1015-12:2016 | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
| UNE-EN 1744-1:2010 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| BS EN 772-6:2001 | Methods of test for masonry units Determination of bending tensile strength of aggregate concrete masonry units |
| BS EN 846-5:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
| BS EN 846-7:2012 | Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| UNE-EN 846-7:2015 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| UNE-EN 998-2:2012 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
| EN 846-7:2012 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 1996-3:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 1996-2:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| EN 934-3:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |
| EN 846-5:2012 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| EN 846-14:2012 | Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
| EN 846-8:2000/A1:2006 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS |
| EN 846-4:2001/A1:2004 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS |
| EN 846-9:2016 | Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels |
| PREN 14944-3 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| UNE-EN 1996-1-1:2011 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products |
| 15/30317324 DC : 0 | BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| DIN EN 772-1:2016-05 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| DIN EN 998-2:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
| BS EN 1015-10:1999 | Methods of test for mortar for masonry Determination of dry bulk density of hardened mortar |
| BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
| BS EN 846-4:2002 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| DIN EN 846-7:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| EN 1015-10:1999/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 10: DETERMINATION OF DRY BULK DENSITY OF HARDENED MORTAR |
| EN 1052-3:2002/A1:2007 | METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH |
| DIN EN 846-4:2005-01 | Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
| DIN EN 846-5:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| UNE-EN 772-1:2011 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| ONORM EN 14944-1 : 2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| ONORM EN 14944-3 : 2008 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| UNE-EN 934-3:2010 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN 1015-2:1998/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 2: BULK SAMPLING OF MORTARS AND PREPARATION OF TEST MORTARS |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| EN 1015-3:1999/A2:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE) |
| EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.