EN 1015-3:1999/A2:2006
Current
The latest, up-to-date edition.
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE)
12-06-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Sampling, preparation and storage of test samples
6 Procedure
7 Calculation and expression of results
8 Test report
Annex A (normative) Details of flow table
Annex B (informative) Bibliography
Covers a method for the determination of the consistency of freshly mixed mortars including those containing mineral binders and both normal weight and lightweight aggregates, which is by means of the flow value.
Committee |
TC 125
|
DocumentType |
Test Method
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NS EN 1015-3 : 1999 AMD 2 2006 | Identical |
NF EN 1015-3 : 1999 AMD 2 2007 | Identical |
I.S. EN 1015-3:1999 | Identical |
NBN EN 1015-3 : 1998 AMD 2 2007 | Identical |
SN EN 1015-3 : 1999 AMD 2 2006 | Identical |
PN EN 1015-3 : 2000 AMD 2 2007 | Identical |
NEN EN 1015-3 : 1999 AMD 2 2006 | Identical |
UNI EN 1015-3 : 2007 | Identical |
BS EN 1015-3:1999 | Identical |
DIN EN 1015-3:2007-05 | Identical |
UNE-EN 1015-3:2000 | Identical |
UNE-EN 1015-3:2000/A2:2007 | Identical |
BS EN 846-14:2012 | Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
DIN EN 16506 E : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
I.S. EN 1015-11:2000 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
99/103841 DC : DRAFT MAY 1999 | EN 1015-14 - METHODS OF TEST FOR MORTAR - PART 14: DETERMINATION OF DURABILITY OF HARDENED MASONRY MORTARS (WITH 50% OF THE CEMENT COMPRISING GREATER THAN TOTAL BINDER MASS) |
PREN 1015-11 : DRAFT 2017 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
UNE-EN 846-14:2013 | Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 1015-12:2016 | Methods of test for mortar for masonry Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
BS EN 1052-3:2002 | Methods of test for masonry Determination of initial shear strength |
BS EN 1015-9:1999 | Methods of test for mortar for masonry Determination of workable life and correction time of fresh mortar |
BS EN 846-8:2000 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
BS EN 450-1:2012 | Fly ash for concrete Definition, specifications and conformity criteria |
BS EN 1015-18:2002 | Methods of test for mortar for masonry Determination of water absorption coefficient due to capillary action of hardened mortar |
EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
EN 1015-18:2002 | Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar |
EN 1015-9:1999/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR |
EN 1052-4:2000 | Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
DIN EN 14891:2017-05 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
EN 1052-5:2005 | Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
EN 1015-21:2002 | Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates |
EN 1015-12:2016 | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
EN 1052-2:2016/AC:2017 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
EN 1015-11 : 1999 AMD 1 2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
EN 1015-6:1998/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR |
10/30212141 DC : 0 | BS EN 846-14 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: LINTELS |
UNI EN 846-14 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
14/30314741 DC : 0 | BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
02/102876 DC : DRAFT APR 2002 | PREN 1052-5 - METHODS OF TEST FOR MASONRY - PART 5: DETERMINATION OF BOND STRENGTH BY THE BOND WRENCH METHOD |
17/30351887 DC : 0 | BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
UNE-EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
DIN EN 1015-10:2007-05 | Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar (includes Amendment A1:2006) |
DIN EN 14891 E : 2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
DIN EN 14891:2015-02 (Draft) | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
BS EN 1052-5:2005 | Methods of test for masonry Determination of bond strength by the bond wrench method |
I.S. EN 450-1:2012 | FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
DIN EN 1052-5:2005-06 | Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
DIN EN 1052-3:2007-06 | Methods of test for masonry - Part 3: Determination of initial shear strength (includes Amendment A1:2007) |
I.S. EN 846-7:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
DIN EN 1015-11:2007-05 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
I.S. EN 1052-2:2016 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1015-6:2007-05 | Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar (includes Amendment A1:2006) |
I.S. EN 846-5:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 1015-12:2016 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 12: DETERMINATION OF ADHESIVE STRENGTH OF HARDENED RENDERING AND PLASTERING MORTARS ON SUBSTRATES |
DIN EN 1052-2:2016-08 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1015-2:2007-05 | Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars (includes Amendment A1:2006) |
DIN EN 1015-9:2007-05 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar (includes Amendment A1:2006) |
I.S. EN 14891:2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
I.S. EN 13395-1:2002 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 1: TEST FOR FLOW OF THIXOTROPIC MORTARS |
93/102674 DC : 0 | PREN 1015-13 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 13: DETERMINATION OF DIMENSIONAL STABILITY OF HARDENED MORTARS |
UNI EN 16506 : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
DIN EN 846-14:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
14/30278089 DC : 0 | BS ISO 13007-5 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 5: LIQUID APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
06/30119204 DC : 0 | EN 14891 - LIQUID-APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING - DEFINITIONS, SPECIFICATIONS AND TEST METHODS |
PREN 14891 : DRAFT 2014 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
BS EN 1015-11:1999 | Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
DIN EN 1015-17:2005-01 | Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars |
BS EN 1052-4:2000 | Methods of test for masonry Determination of shear strength including damp proof course |
BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
UNE-EN 846-5:2013 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNI EN 846-7 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
UNI EN 846-5 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
UNI EN 1052-4 : 2001 | METHODS OF TEST FOR MASONRY - DETERMINATION OF SHEAR STRENGTH INCLUDING DAMP PROOF COURSE |
UNI EN 450-1 : 2012 | FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
PREN 846-5 : DRAFT 2010 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
10/30212138 DC : 0 | BS EN 846-7 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
10/30212132 DC : 0 | BS EN 846-5 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 846-14:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 1052-2:2016 | Methods of test for masonry Determination of flexural strength |
UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 846-2:2000 | Methods of test for ancillary components for masonry Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
BS EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of thixotropic mortars |
BS EN 1015-6:1999 | Methods of test for mortar for masonry Determination of bulk density of fresh mortar |
BS EN 1015-2:1999 | Methods of test for mortar for masonry Bulk sampling of mortars and preparation of test mortars |
UNE-EN 1015-12:2016 | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
BS EN 846-5:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
UNE-EN 450-1:2013 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
BS EN 1015-21:2002 | Methods of test for mortar for masonry Determination of the compatibility of one-coat rendering mortars with substrates |
BS EN 846-7:2012 | Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
UNE-EN 846-7:2015 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
EN 846-7:2012 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
EN 846-5:2012 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
EN 846-2:2000 | Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 846-14:2012 | Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
EN 846-8:2000/A1:2006 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS |
EN 846-4:2001/A1:2004 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS |
93/102669 DC : DRAFT APR 1993 | PREN 1015-8 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 8: DETERMINATION OF WATER RETENTIVITY OF FRESH MORTAR |
BS ISO 13007-5:2015 | Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
PREN 846-7 : DRAFT 2010 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
ISO 13007-5:2015 | Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
BS EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
BS EN 1015-10:1999 | Methods of test for mortar for masonry Determination of dry bulk density of hardened mortar |
BS EN 846-4:2002 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps |
BS EN 1015-17:2000 | Methods of test for mortar for masonry Determination of water-soluble chloride content of fresh mortars |
EN 1015-17:2000/A1:2004 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 17: DETERMINATION OF CHLORIDE CONTENT OF FRESH MORTARS |
EN 1015-2:1998/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 2: BULK SAMPLING OF MORTARS AND PREPARATION OF TEST MORTARS |
DIN EN 846-7:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
EN 1015-10:1999/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 10: DETERMINATION OF DRY BULK DENSITY OF HARDENED MORTAR |
EN 1052-3:2002/A1:2007 | METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH |
DIN EN 846-4:2005-01 | Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
DIN EN 846-5:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
DIN EN 450-1:2012-10 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
EN 1015-4:1998 | Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) |
EN 1015-2:1998/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 2: BULK SAMPLING OF MORTARS AND PREPARATION OF TEST MORTARS |
EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.