EN 10249-1:1995
Current
The latest, up-to-date edition.
06-15-1995
Foreword
1 Scope
2 Normative references
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Mass of steel
6 Classification and designation
6.1 Classification
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery conditions
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
8 Inspection and testing
8.1 General
8.2 Specific inspection and testing
8.3 Inspection units
8.4 Internal defects
8.5 Control of the dimensional tolerances
8.6 Inspection documents
9 Marking
10 Options
Annex A (informative) List of national standards which
correspond to EURONORMS referenced
Annex B (informative) List of corresponding former
national designations
This part of this European Standard specifies the requirements for cold formed non alloy steel sheet piling produced from hot rolled strip or sheet with a thickness equal to or greater than 2mm in respect of its chemical composition, mechanical and technological properties and delivery conditions. The products specified are for general, structural and civil engineering works. Requirements concerning the tolerances on shape and dimensions are specified in Part 2 of this European Standard.
| Committee |
CEN/TC 459/SC 3
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 10249-1:1996 | Identical |
| BS EN 10249-1:1996 | Identical |
| I.S. EN 10249-1:1996 | Identical |
| PN EN 10249-1 : 2000 | Identical |
| NEN EN 10249-1 : 1995 C1 1997 | Identical |
| NF EN 10249-1 : 1995 | Identical |
| UNI EN 10249-1 : 1997 | Identical |
| NS EN 10249-1 : 1ED 1995 | Identical |
| NBN EN 10249-1 : 1995 | Identical |
| DIN EN 10249-1:2006-05 (Draft) | Identical |
| SN EN 10249-1 : 1995 | Identical |
| DIN EN 10249-1:1995-08 | Identical |
| 08/30192726 DC : 0 | BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| PREN 1536 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| BS EN 1993-5:2007 | Eurocode 3. Design of steel structures Piling |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| I.S. EN 1993-5:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 10249-2:2006-05 (Draft) | Cold-formed steel sheet piling - Part 2: Tolerances on shape and dimensions; German version prEN 10249-2:2006 |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| 08/30192723 DC : 0 | BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 12699 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| EN 1993-5:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| UNI EN 1993-5 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. ENV 1993-5:1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 12063:1999 | Execution of special geotechnical work. Sheet pile walls |
| BS EN 10249-2:1996 | Cold formed sheet piling of non alloy steels Tolerances on shape and dimensions |
| ENV 1993-5 : 1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| PD CR 10313:2000 | Classification of grades of steel. Examples of classification related to European standards |
| PREN 1538 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| 13/30280740 DC : 0 | BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| S.R. CR 10313:2000 | CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| CR 10313:2000 | Classification of grades of steel - Examples of classification related to European Standards |
| EN 12063:1999 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET PILE WALLS |
| DIN EN 1993-5:2010-12 | Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009) |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| DIN EN 10249-2:1995-08 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10079:2007 | Definition of steel products |
| PREN 10149-3 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| EURONORM 18 : 1979 | TAKING AND PREPARATION OF SAMPLES AND SAMPLE SECTIONS OF STEEL AND STEEL PRODUCTS |
| NBN ECISS IC 10 : 1993 | DESIGNATION SYSTEM FOR STEEL - ADDITIONAL SYMBOLS FOR STEEL NAMES |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EURONORM 168 : 1986 | IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS |
| EN 10113-3 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.