EN 12429:1998
Current
Current
The latest, up-to-date edition.
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
Published date
06-25-1998
Publisher
Foreword
1 Scope
2 Normative references
3 Definitions and abbreviations
4 Principle
5 Apparatus
6 Test specimens
7 Procedure
8 Calculation and expression of results
9 Accuracy
10 Test report
Annex A (normative) Determination of limiting value
of moisture content change and conditioning time
factor by experiment
Annex B (informative) Computer calculations to determine
the limiting value of moisture content change
Annex C (informative) Calculations of conditioning time
to reach equilibrium using the Fourier number
This European standard specifies equipment and procedures to condition a thermal insulating product to equilibrium moisture content at (23+/-2)°C and (50+/-5)% relative humidity. The standard is also applicable to thermal insulating products with moulded skins but is not normally relevant for faced products or for products with other surface treatments.
| Committee |
CEN/TC 88
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 12429:1999 | Identical |
| PN EN 12429 : 2001 | Identical |
| DIN EN 12429:1998-08 | Identical |
| SN EN 12429 : 1998 | Identical |
| NEN EN 12429 : 1998 | Identical |
| NBN EN 12429 : 1998 | Identical |
| UNI EN 12429 : 2000 | Identical |
| NF EN 12429 : 1999 | Identical |
| BS EN 12429:1998 | Identical |
| I.S. EN 12429:1999 | Identical |
| NS EN 12429 : 1ED 1998 | Identical |
| I.S. EN 14314:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| UNE-EN 16809-2:2017 | Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation |
| 14/30282881 DC : 0 | BS EN 16809-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| BS EN 16809-2:2017 | Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads Specification for the bonded and loose-fill products after installation |
| 07/30165858 DC : 0 | BS EN 14707 AMD 1 - THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| ISO 18097:2013 | Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature |
| I.S. CEN TR 14613:2004 | THERMAL PERFORMANCE OF BUILDING MATERIALS AND COMPONENTS - PRINCIPLES FOR THE DETERMINATION OF THERMAL PROPERTIES OF MOIST MATERIALS AND COMPONENTS |
| I.S. EN 16809-2:2017 | THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| PREN 16809-1 : DRAFT 2014 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 1: SPECIFICATION FOR THE BONDED AND LOOSE FILLED PRODUCTS BEFORE INSTALLATION |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| EN 13166:2012+A2:2016 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| CEN/TR 14613:2003 | Thermal performance of building materials and components - Principles for the determination of thermal properties of moist material and components |
| EN 13163:2012+A2:2016 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
| DIN EN 16809-2:2017-04 | THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| 15/30315087 DC : DRAFT MAY 2015 | BS EN 14314 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| PREN 14707 : DRAFT 2012 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| DIN EN 14308 E : 2016 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| 12/30256793 DC : 0 | BS EN 14707 - THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| BS ISO 18097:2013 | Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature |
| 15/30315081 DC : DRAFT MAY 2015 | BS EN 14308 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| 05/30136516 DC : 0 | PREN 14308 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| 12/30256790 DC : 0 | BS EN 14706 - THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| 10/30213971 DC : 0 | BS EN 13166 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| PREN 14314 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| 05/30136550 DC : 0 | PREN 14314 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14308:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN EN 13166:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14706:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
| BS EN 14706:2012 | Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature |
| DIN EN 13163:2017-02 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| I.S. EN 13163:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| I.S. EN 13166:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| I.S. EN 14706:2012 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| I.S. EN 14707:2012 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| BS EN 14314:2015 | Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification |
| 03/302913 DC : DRAFT MAY 2003 | EN 14706 - THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| PD CEN/TR 14613:2003 | Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s |
| DIN EN 16809-2 E : 2017 | THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| PREN 14308 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN EN 13163:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| DIN EN 14707:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
| BS EN 14707:2012 | Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation |
| BS EN 12089:2013 | Thermal insulating products for building applications. Determination of bending behaviour |
| UNI EN 14706 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| UNI EN 14707 : 2012 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| BS EN 14308:2015 | Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification |
| 08/30169543 DC : DRAFT APR 2008 | BS EN 13166 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF PHENOLIC FOAM (PF) - SPECIFICATION |
| UNE-EN 14308:2017 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| DIN EN 14314 E : 2016 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14314:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| I.S. EN 14308:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN EN 14706 E : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| UNE-EN 13166:2013 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| BS EN 13166 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| UNE-EN 13163:2013 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
| UNE-EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| EN 14308:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| EN 14707:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
| EN 14706:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
| EN 14314:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| EN 16809-2:2017 | Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation |
| PREN 14706 : DRAFT 2012 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE |
| PREN 13166 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14707 E : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF MAXIMUM SERVICE TEMPERATURE FOR PREFORMED PIPE INSULATION |
| BS EN 13163 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| EN 12085:2013 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.