• There are no items in your cart

EN 12516-1:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
Superseded date

06-19-2019

Published date

10-29-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and units
5 Material groups and material temperature
   limitations
6 Pressure/temperature (p/t) ratings
7 Temperature effects
8 Dimensions
9 Auxiliary connections
10 End dimensions
11 Marking
Annex A (normative) - Methods used for establishing
        pressure/temperature ratings
Annex B (normative) - Material groups
Annex C (informative) - Special Class
Annex D (informative) - Radiographic procedure and
        acceptance standards
Annex E (informative) - Magnetic particle examination
        procedure and acceptance standards
Annex F (informative) - Liquid penetrant examination
        procedure and acceptance standards
Annex G (informative) - Ultrasonic examination procedure
        and acceptance standards
Annex H (informative) - Requirement for Limited Class
        valves in sizes DN 65 and smaller
Annex I (informative) - ASTM/ASME material
Annex J (informative) - Relationship between DN, NPS,
        pipe inside diameter D[ni], pipe outside diameter OD
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 97/23/EC (Pressure
         Equipment Directive)
Bibliography

This European Standard specifies the tabulation method for determining the wall thickness of valve bodies, bonnets and covers with essentially circular cross-section made in forged, cast or fabricated steel.For valve shells with oval, rectangular or non-circular shapes, see 8.6.The range of PN or Class designations for which thicknesses are tabulated is:PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400, Class 150, Class 300,Class 600, Class 900, Class 1 500, Class 2 500, Class 4 500.Pressure/temperature ratings are specified for each material group for the above PN Standard Class and Special Class designations.The non-destructive examination procedures and acceptance levels that need to be applied to the valve shell components in order for the valve to be used at Special Class pressure/temperature ratings are defined.Details are also given for the alternative rules for small bore valves of DN 65 and smaller designated as Limited Class.This standard does not apply to threaded end valves:-DN 80 or larger;-or which have pressure ratings greater than Class 2 500;-or which operate at temperatures greater than 540 °C.Socket welding end valves DN 80 or larger are outside the scope of this standard.

DevelopmentNote
Supersedes PREN 12516-1. (11/2014)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

DIN EN 16722 E : 2015 INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS
BS EN 16678:2015 Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
12/30236280 DC : 0 BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
13/30275593 DC : 0 BS EN 14432 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN 16722:2015 INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
API 6DSS REDLINE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
UNE-EN ISO 28921-1:2018 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
UNE-EN 16767:2017 Industrial valves - Steel and cast iron check valves
07/30168326 DC : DRAFT DEC 2007 BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
PREN 19 : DRAFT 2014 INDUSTRIAL VALVES - MARKING OF METALLIC VALVES
ISO 10631:2013 Metallic butterfly valves for general purposes
UNE-EN 16678:2016 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13709:2010-10 Industrial valves - Steel globe and globe stop and check valves
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
UNE-EN 1983:2014 Industrial valves - Steel ball valves
UNE-EN 16722:2016 Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
UNE-EN 14432:2015 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 1984:2010 Industrial valves. Steel gate valves
UNE-EN 14433:2015 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
I.S. EN 14433:2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
UNI EN 12516-2 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
EN 1349:2009 Industrial process control valves
BS EN 1349:2009 Industrial process control valves
PREN 13774 : DRAFT 2011 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
11/30246933 DC : 0 BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
14/30296044 DC : 0 BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS
16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 13709 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
PREN 1984 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GATE VALVES
BS ISO 10631:2013 Metallic butterfly valves for general purposes
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS ISO 28921-1 : 2013 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
BS ISO 19240:2017 Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
I.S. EN 16678:2015 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
I.S. EN 16767:2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
DIN EN ISO 17292:2016-05 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
DIN EN 1626:2009-01 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
DIN EN 1984:2010-10 Industrial valves - Steel gate valves
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 14433:2014-12 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
DIN EN 14432:2014-12 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNE-EN 12516-2:2016 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
UNE-EN 593:2009 Industrial valves - Metallic butterfly valves
BS EN 13709:2002 Industrial valves. Steel globe and globe stop and check valves
I.S. EN 1626:2008 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
I.S. EN 13774:2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 12516-2:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 1984:2010 INDUSTRIAL VALVES - STEEL GATE VALVES
I.S. EN 13942:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
DIN EN 1983:2013-12 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN ISO 14723:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
I.S. EN 19:2016 INDUSTRIAL VALVES - MARKING OF METALLIC VALVES
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 1983:2013 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN 1349:2009 INDUSTRIAL PROCESS CONTROL VALVES
I.S. EN 13709:2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
I.S. EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
I.S. EN 14432:2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNI EN 14432 : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNI EN 1349 : 2010 INDUSTRIAL PROCESS CONTROL VALVES
14/30301146 DC : 0 BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES
I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
11/30243885 DC : 0 BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
13/30286091 DC : 0 BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
09/30205877 DC : 0 BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES
08/30187521 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
13/30280746 DC : 0 BS EN 14433 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
09/30205883 DC : 0 BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
DIN EN 16767 E : 2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
10/30216306 DC : 0 BS ISO 12490 - PETROLEUM AND NATURAL GAS INDUSTRIES - ACTUATION MECHANICAL INTEGRITY AND SIZING FOR PIPELINE VALVES
BS EN 16668 : 2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 19:2016 Industrial valves - Marking of metallic valves
EN 13942:2009/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
EN 13942:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
BS EN 1626:2008 Cryogenic vessels. Valves for cryogenic service
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 13942 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
UNI EN 1983 : 2013 INDUSTRIAL VALVES - STEEL BALL VALVES
UNI EN 13774 : 2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 1626 : 2009 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN ISO 14723 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
UNI EN 1984 : 2010 INDUSTRIAL VALVES - STEEL GATE VALVES
UNI EN 14433 : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
UNI EN 13709 : 2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS EN 16722:2015 Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends
08/30179182 DC : DRAFT MAY 2008 BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
DIN EN ISO 28921-1 E : 2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
API 6DSS CHINESE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
PREN 14433 : DRAFT 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
ISO 19240:2017 Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12480:2018 Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 13774:2013-05 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN 14433 E : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
DIN EN 14432 E : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNE-EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
BS EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
BS EN 14341:2006 Industrial valves. Steel check valves
EN 16767:2016 Industrial valves - Steel and cast iron check valves
UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 14432:2014 Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves
BS EN ISO 14723:2009 Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
BS EN 1983:2013 Industrial valves. Steel ball valves
BS EN 12516-2:2014 Industrial valves. Shell design strength Calculation method for steel valve shells
BS EN 13942:2009 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
UNE-EN 19:2016 Industrial valves - Marking of metallic valves
BS EN 19:2016 Industrial valves. Marking of metallic valves
EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 16678:2015 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 14432:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
EN ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN 1983:2013 Industrial valves - Steel ball valves
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 1984:2010 Industrial valves - Steel gate valves
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 14433:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
EN 16722:2015 Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
EN 14341:2006 Industrial valves - Steel check valves
DIN EN 16678 E : 2016 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
I.S. EN 14341:2006 INDUSTRIAL VALVES - STEEL CHECK VALVES
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
11/30248438 DC : 0 BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS ISO 12490:2011 Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
08/30180264 DC : DRAFT JUNE 2008 BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
07/30158957 DC : 0 BS EN 1626 - CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
16/30335252 DC : 0 BS ISO 19240 - INDUSTRIAL VALVES - LINED METAL QUARTER TURN AND CHECK VALVES FOR CHEMICAL PROCESS AND RELATED INDUSTRIES
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
DIN EN 16767:2016-08 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
DIN EN 16678:2016-02 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
API 6DX : 2012 ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES
PREN 14432 : DRAFT 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 19:2016-07 Industrial valves - Marking of metallic valves
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
BS EN 14433:2014 Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves
DIN EN 16722:2015-12 INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS

EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
EN 10213:2007+A1:2016 Steel castings for pressure purposes
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 12680-1:2003 Founding - Ultrasonic examination - Part 1: Steel castings for general purposes
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 736-2:2016 Valves - Terminology - Part 2: Definition of components of valves
ISO 5579:2013 Non-destructive testing Radiographic testing of metallic materials using film and X- or gamma rays Basic rules
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN ISO 9934-1:2016 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
ISO 9692-1:2013 Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN ISO 5579:2013 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)
EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10228-3:2016 Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 12516-3:2002/AC:2003 VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
ISO 9934-1:2016 Non-destructive testing — Magnetic particle testing — Part 1: General principles
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 1369:2012 Founding - Magnetic particle testing
EN 462-1:1994 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
EN 12681 : 2003 FOUNDING - RADIOGRAPHIC EXAMINATION
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 19:2016 Industrial valves - Marking of metallic valves
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.