EN 12524 : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES
Superseded date
12-15-2007
Published date
01-12-2013
Publisher
Foreword
1 Scope
2 Normative references
3 Definitions, symbols and units
4 Design thermal values
Bibliography
Provides design data in tabular form for moisture and heat transfer calculations, for thermally homogenous materials and products used in building construction. Also gives data to enable calculation and conversion of design thermal values for various environmental conditions.
| Committee |
TC 89
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 12524:2000 | Identical |
| NEN EN 12524 : 2000 | Identical |
| I.S. EN 12524:2000 | Identical |
| NBN EN 12524 : 2000 | Identical |
| NF EN 12524 : 2000 | Identical |
| NS EN 12524 : 1ED 2000 | Identical |
| PN EN 12524 : 2003 | Identical |
| BS EN 12524:2000 | Identical |
| DIN EN 12524:2000-07 | Identical |
| SN EN 12524 : 2000 | Identical |
| UNI EN 12524 : 2001 | Identical |
| DIN EN 15285:2008-09 | Agglomerated stone - Modular tiles for flooring and stairs (internal and external) |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| 10/30236365 DC : 0 | BS EN 12428 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - THERMAL TRANSMITTANCE - REQUIREMENTS FOR CLASSIFICATION |
| 04/30124006 DC : DRAFT OCT 2004 | EN 15026 - HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - ASSESSMENT OF MOISTURE TRANSFER BY NUMERICAL SIMULATION |
| BS EN 14064-1:2010 | Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products Specification for the loose-fill products before installation |
| DIN EN 15283-2:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
| BS EN 15285:2008 | Agglomerated stone. Modular tiles for flooring and stairs (internal and external) |
| 04/30113929 DC : DRAFT MAY 2004 | EN ISO 10077-1 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 07/30166420 DC : DRAFT AUG 2007 | BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| PREN 14342 : DRAFT 2011 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| EN 15102:2007+A1:2011 | Decorative wall coverings - Roll and panel form |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| DIN EN 14964 E : 2007 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 12860:2001/AC:2002 | GYPSUM BASED ADHESIVES FOR GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13813:2003-01 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS |
| EN 12831 : 2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| DIN EN 14041:2008-05 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| EN 12831-1:2017 | Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3 |
| CEN/TS 15679:2007 | Thermal Modified Timber - Definitions and characteristics |
| EN 13213 : 2001 | HOLLOW FLOORS |
| BS EN 15283-1 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 11/30249117 DC : 0 | BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 12831-1:2017 | Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3 |
| UNI EN 15283-2 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| 02/100467 DC : DRAFT MAR 2002 | PREN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 12/30254418 DC : DRAFT JAN 2012 | BS EN 1469 - NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| DIN EN 12831-1 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. EN 15283-1:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| UNI EN 15283-1 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 12/30254421 DC : DRAFT JAN 2012 | BS EN 12057 - NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. EN 12831-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| PREN 771-6 : DRAFT 2010 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| UNI EN 14064-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 15102 E : 2011 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 14246:2006-09 | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| I.S. EN ISO 10456:2007 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| I.S. EN 15102:2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| 10/30203906 DC : 0 | BS EN 771-6 - SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| 11/30244187 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| DIN EN 15283-1:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009) |
| DIN EN 15498:2008-08 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| PREN 12428 : DRAFT 2010 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - THERMAL TRANSMITTANCE - REQUIREMENTS FOR CLASSIFICATION |
| 00/106948 DC : DRAFT OCT 2000 | PREN 13947 - THERMAL PERFORMANCE OF CURTAIN WALLING - CALCULATION OF THERMAL TRANSMITTANCE |
| DD CEN/TS 15679:2007 | Thermal modified timber. Definitions and characteristics |
| BS EN 15498:2008 | Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance |
| UNE-CEN/TS 15679:2009 EX | Thermal Modified Timber - Definitions and characteristics |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 15498 : 2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| PREN 13950 : DRAFT 2011 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 15498:2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 15319 E : 2007 | GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
| UNE-EN ISO 10456:2012 | Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) |
| BS EN 13213:2001 | Hollow floors |
| EN 14064-1:2010 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 520 : 2009 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 12831 : 2006 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| UNI EN ISO 10456 : 2008 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| UNI EN 14246 : 2006 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 13279-1 : 2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14041:2016-07 (Draft) | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| 14/30309932 DC : 0 | BS EN 12831-1 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD |
| DIN EN 15498 E : 2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| 11/30251985 DC : 0 | BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 15285 E : 2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| UNI CEN/TS 15679 : 2008 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 14509 E : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 05/30135869 DC : 0 | EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| UNI EN 15102 : 2011 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 15285:2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| BS EN 15102 : 2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| DIN EN 15319:2007-10 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| BS EN 14246:2006 | Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
| BS EN ISO 10456:2007 | Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values |
| BS EN 12860:2001 | Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 14063-1:2004/AC:2006 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 15498:2008 | Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance |
| EN 14246:2006/AC:2007 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 15285:2008/AC:2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| EN 438-7:2005 (edition 2) | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 15319 : 2007 | GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
| EN 13813:2002 | Screed material and floor screeds - Screed material - Properties and requirements |
| DIN EN 12831-1:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| 05/30135872 DC : 0 | EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNE-EN 15319:2012 | General principles of design of fibrous (gypsum) plaster works |
| I.S. EN 12831:2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| BS EN 15283-2 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| 12/30254424 DC : DRAFT JAN 2012 | BS EN 12058 - NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS |
| 04/30048871 DC : DRAFT MAY 2004 | BS EN 14964 - ROOF COVERING PRODUCTS FOR DISCONTINUOUS LAYING AND PRODUCTS FOR WALL CLADDING - RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| 04/30126127 DC : 0 | EN 15102 - DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM |
| UNI EN 15285 : 2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| UNE-EN 15102:2008 | Decorative wallcoverings - Roll and panel form products |
| I.S. EN 14064-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSEFILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 15283-2:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| DIN EN 15102:2016-02 (Draft) | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| DIN EN 14064-1:2010-06 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| S.R. CEN/TS 15679:2007 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 14246 E : 2006 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| ISO 9346:2007 | Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
| EN ISO 9346:2007 | Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007) |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.