EN 12680-2:2003
Current
The latest, up-to-date edition.
01-22-2003
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Order information
4.2 Extent of examination
4.3 Maximum permissible size of discontinuities
4.4 Personnel qualification
4.5 Wall section zones
4.6 Severity levels
5 Examination
5.1 Principles
5.2 Material
5.3 Equipment, coupling medium, sensitivity and
no resolution of detection
5.4 Preparation of casting surfaces for testing
5.5 Examination procedure
5.6 Examination report
Annex A (normative) Resolution of detection of the
instrument/probe combination
Annex B (informative) Sound-beam diameters
Annex C (informative) Types of indications
Bibliography
This European Standard specifies the requirements for the ultrasonic examination of steel castings (with ferritic structure) for highly stressed components and the methods for determining internal discontinuities by the pulse echo technique.This European Standard applies to the ultrasonic examination of steel castings which have usually received a grain refining heat treatment and which have wall thicknesses up to and including 600 mm.For greater wall thicknesses, special agreements apply with respect to test procedure and recording levels.This European Standard does not apply to austenitic steels and joint welds.
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 12680-2 : 1ED 2003 | Identical |
| NF EN 12680-2 : 2003 | Identical |
| SN EN 12680-2 : 2003 | Identical |
| I.S. EN 12680-2:2003 | Identical |
| UNI EN 12680-2 : 2005 | Identical |
| NEN EN 12680-2 : 2003 | Identical |
| BS EN 12680-2:2003 | Identical |
| NBN EN 12680-2 : 2003 | Identical |
| PN EN 12680-2 : 2005 | Identical |
| UNE-EN 12680-2:2003 | Identical |
| DIN EN 12680-2 E : 2003 | Identical |
| ONORM EN 12680-2 : 2003 | Identical |
| DIN EN 12680-2:2003-06 | Identical |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| I.S. EN 10213:2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| 17/30244737 DC : 0 | BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN EN 12681:2003-06 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 12681:2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| UNE-EN 10213:2009 | Steel castings for pressure purposes |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| BS EN 12681:2003 | Founding. Radiographic examination |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| BS EN 10213 : 2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| EN 27963 : 1992 | SPECIFICATION FOR CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| EN 1330-4:2010 | Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 583-5:2000/A1:2003 | NON DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 5: CHARACTERIZATION AND SIZING OF DISCONTINUITIES |
| EN 583-2:2001 | Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting |
| EN 1370:2011 | Founding - Examination of surface condition |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 583-1:1998/A1:2003 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES |
| EN 12223:1999 | Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 |
| EN 12668-3:2013 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.