EN 12697-38:2004
Current
Current
The latest, up-to-date edition.
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
Published date
07-28-2004
Publisher
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test equipment
6 Calibration
Annex A (informative) Recommendations for Laboratory
Management
Annex B (informative) Accuracy of measurement
Annex C (informative) Rounding of values for reported
results
Bibliography
This document specifies general requirements for common test equipment, calibration procedures and reagents for the testing of bituminous materials in the EN 12697 series of standards.
NOTE 1This document makes use by reference of the requirements for common equipment and calibration prepared for aggregates.
NOTE 2Bodies providing accreditation of test equipment may need to consider alternative requirements and/or calibration frequencies in order to cover the possibilities of National Health & safety, regulatory and legislative requirements.
Advice is also given on recommendations for laboratory management (annex A), on the accuracy of measurement (annex B) and on the rounding of values for reported results (annex C).
| Committee |
CEN/TC 227
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 12697-38:2004 | Identical |
| NBN EN 12697-38 : 2004 | Identical |
| SN 670438 : 2005 | Identical |
| NF EN 12697-38 : 2004 | Identical |
| UNI EN 12697-38 : 2004 | Identical |
| I.S. EN 12697-38:2004 | Identical |
| PN EN 12697-38 : 2007 | Identical |
| UNE-EN 12697-38:2006 | Identical |
| NEN EN 12697-38 : 2004 | Identical |
| SN EN 12697-38 : 2005 | Identical |
| NS EN 12697-38 : 1ED 2004 | Identical |
| DIN EN 12697-38:2004-10 | Identical |
| UNE-EN 12697-38:2004 | Identical |
| PREN 12697-13 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 13: TEMPERATURE MEASUREMENT |
| I.S. EN 12271:2006 | SURFACE DRESSING - REQUIREMENTS |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 12697-3:2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| DIN EN 12697-6 E : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| BS EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 12271:2006 | Surface dressing - Requirements |
| EN 12274-7 : 2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| 14/30311115 DC : 0 | BS EN 12697-8 - BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
| PREN 12697-35 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| DIN EN 12697-4 E : 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 4: BITUMEN RECOVERY: FRACTIONATING COLUMN |
| DIN EN 12697-3:2013-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| I.S. EN 12697-35:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| I.S. EN 12697-4:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 4: BITUMEN RECOVERY: FRACTIONATING COLUMN |
| DIN EN 12697-32:2013-11 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR |
| 13/30288546 DC : 0 | BS EN 12697-32 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR |
| UNE-EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| DIN EN 12697-3 E : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| DIN EN 12271:2007-03 | Surface dressing - Requirements |
| DIN EN 12274-7:2005-08 | SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
| BS EN 12271:2006 | Surface dressing. Requirements |
| UNE-EN 12697-35:2017 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| DIN EN 12697-4:2015-09 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| UNI EN 12274-7 : 2005 | SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
| UNI EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| 14/30310361 DC : 0 | BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| 15/30320136 DC : 0 | BS EN 12697-13 - BITUMINOUS MIXTURES - TEST METHODS - PART 13: TEMPERATURE MEASUREMENT |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| 17/30360929 DC : 0 | BS EN 12697-8 - BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
| BS EN 12697-6:2012 | Bituminous mixtures. Test methods for hot mix asphalt Determination of bulk density of bituminous specimens |
| BS EN 12274-7:2005 | Slurry surfacing. Test methods Shaking abrasion test |
| UNI EN 12697-6 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| BS EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing |
| EN 12697-6:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| I.S. EN 12697-6:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| UNE-EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| UNE-EN 12697-6:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens |
| BS EN 12697-4:2005 | Bituminous mixtures. Test methods for hot mix asphalt Bitumen recovery. Fractionating column |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| PREN 12697-8 : DRAFT 2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
| DIN EN 12697-6:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| EN ISO 376:2011 | Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| NEN 3114 : 1990 | ACCURACY OF MEASUREMENTS - TERMS AND DEFINITIONS |
| ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO Guide 33:2015 | Reference materials Good practice in using reference materials |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO Guide 35:2017 | Reference materials Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 11095:1996 | Linear calibration using reference materials |
| EN 61010-2-020:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
| ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| IEC 61010-2-020:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.