• There are no items in your cart

EN 12735-1:2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
Superseded date

04-08-2020

Published date

06-15-2016

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Packaging, marking and form of delivery
Annex A (normative) - Marking durability test
Annex B (normative) - Freedom from defects test
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of Directive 2014/68/EU aimed
         to be covered
Bibliography

This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper and copper alloy tubes used for refrigeration and air-conditioning piping systems (i.e. piping, connections and repairs).It is applicable to tubes with an outside diameter from 3 mm up to and including 219 mm.Tubes made of the copper-grade Cu-DHP are supplied in straight lengths in the material conditions hard or half-hard, or in coils in the annealed material condition.Tubes made of the alloy CuFe2P are supplied in straight length in the material conditions hard or annealed.

Committee
CEN/TC 133
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

I.S. EN 12607-1:2014 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
03/302503 DC : DRAFT FEB 2003 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
05/30138291 DC : DRAFT AUG 2005 EN 12607-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD
05/30138288 DC : DRAFT AUG 2005 EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
PREN 14276-2 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
PREN 12607-1 : DRAFT 2013 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
17/30350914 DC : 0 BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 12607-1:2014 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method
03/314351 DC : 0 EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
S.R. CEN/TS 13388:2015 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
PD CEN/TS 13388:2015 Copper and copper alloys. Compendium of compositions and products
NF EN 14276-2 : 2007 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
DIN SPEC 9700 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
13/30255328 DC : 0 BS EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
IP 460-1 : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
PREN 1047-2 : DRAFT 2017 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 14276-2:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
UNI EN 14276-2 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
UNI EN 12607-1 : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
BS 2000-460.1(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
BS ISO 12614-12:2014 Road vehicles. Liquefied natural gas (LNG) fuel system components Rigid fuel line in copper and its alloys
17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
17/30351221 DC : 0 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
ISO 12614-12:2014 Road vehicles Liquefied natural gas (LNG) fuel system components Part 12: Rigid fuel line in copper and its alloys
EN 12861:2018 Copper and copper alloys - Scrap
I.S. CEN TS 13388:2004 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
DIN EN 12607-1:2015-01 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
UNE-CEN/TS 13388:2010 EX Copper and copper alloys - Compendium of compositions and products
UNE-EN 12607-1:2015 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method
BS EN 12607-1:2014 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RTFOT method
BS EN 14276-2 : 2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
I.S. EN 14276-2:2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
CEN/TS 13388:2015 Copper and copper alloys - Compendium of compositions and products
UNE-EN 14276-2:2008 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
BS 2000-460-1(2014) : 2014 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD
PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 12861:1999 COPPER AND COPPER ALLOYS - SCRAP
DIN CEN/TS 13388 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
ISO 5149-2:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
DIN CEN/TS 13388;DIN SPEC 9700:2013-05 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 1655:1997 Copper and copper alloys - Declarations of conformity
EN 1971-2:2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
EN ISO 8493 : 2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
EN 1412:2016 Copper and copper alloys - European numbering system
ISO 1190-1:1982 Copper and copper alloys Code of designation Part 1: Designation of materials
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper Determination of copper content Electrolytic method
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 8493:1998 Metallic materials Tube Drift-expanding test
EN 723:2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
EN 1971-1:2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
EN 1173:2008 Copper and copper alloys - Material condition designation
EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 4741:1984 Copper and copper alloys — Determination of phosphorus content — Molybdovanadate spectrometric method
EN 10204:2004 Metallic products - Types of inspection documents
2014/68/EU : 2014 COR 1 2015 DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE
ISO 9001:2015 Quality management systems — Requirements
ISO 857-2:2005 Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.