• There are no items in your cart

EN 12811-2:2004

Current
Current

The latest, up-to-date edition.

Temporary works equipment - Part 2: Information on materials
Published date

02-11-2004

1 Scope
2 Normative references
3 General
  3.1 Selection of materials
  3.2 Characteristic values
  3.3 Inspection documents
  3.4 Effects of fabrication
4 Steel
  4.1 General
  4.2 Dimensions, mass and tolerance
  4.3 Fracture toughness
  4.4 Steel grades in EN 10142
5 Cast iron
  5.1 General
  5.2 Prototype testing
  5.3 Inspection document
6 Aluminium alloys
  6.1 General
  6.2 Dimensions, mass and tolerance
  6.3 Heat affected zones
  6.4 Inspection document
7 Timber and timber based materials
  7.1 General
  7.2 Solid timber and glued laminated timber
      7.2.1 General
      7.2.2 Characteristic values
      7.2.3 Dimensions, mass and tolerance
  7.3 Wood-based materials (plywood, particleboard,
      fibreboard)
      7.3.1 General
8 Protection against corrosion and deterioration
  8.1 Ferrous metal products
  8.2 Aluminium alloys
  8.3 Plywood for scaffold decks
9 Welding
Annex A (informative) Information taken from other
        material and design standards
Bibliography

This draft European Standard only deals with commonly used steel, aluminium alloys, cast iron, timber and timber based materials. It also covers requirements for welding and for limiting corrosion and other deterioration

Committee
CEN/TC 53
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN EN 16508 E : 2016 TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
DIN EN 16508:2016-02 TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
I.S. EN 74-1:2005 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
12/30248282 DC : 0 BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
07/19978687 DC : 0 BS EN 74-2 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 16704-2-2:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
DIN EN 12813:2004-09 Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design
BS EN 12813:2004 Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design
EN 12813:2004 Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design
DIN EN 16031:2012-09 ADJUSTABLE TELESCOPIC ALUMINUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
BS EN 16031:2012 Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests
14/30285802 DC : 0 BS EN 16704-2-2 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
I.S. EN 12811-4:2013 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
I.S. EN 74-3:2007 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 16508:2015 TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
DIN EN 74-1:2005-12 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
I.S. EN 1004:2005 MOBILE ACCESS AND WORKING TOWERS MADE OF PREFABRICATED ELEMENTS - MATERIALS, DIMENSIONS, DESIGN LOADS, SAFETY AND PERFORMANCE REQUIREMENTS
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 12811-4 : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
12/30272145 DC : 0 BS EN 16508 - TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
BS EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
BS EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds Plain base plates and spigot pins. Requirements and test procedures
UNE-EN 14653-1:2012 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
BS EN 16704-2-2:2016 Railway applications. Track. Safety protection on the track during work Common solutions and technology. Requirements for barriers
I.S. EN 16031:2012 ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 16704-2-2:2017 Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
UNI EN 74-3 : 2007 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES
DIN EN 1004:2005-03 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
EN 16704-2-2:2016 Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
ONORM EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
ONORM EN 74-1 : 2006 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
DIN 4420-3:2006-01 SERVICE AND WORKING SCAFFOLDS - PART 3: SELECTED TYPES OF SCAFFOLDING CONSTRUCTIONS AND THEIR BASIC VERSIONS
DIN EN 74-3:2007-07 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
DIN EN 16704-2-2:2014-07 (Draft) RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
DIN EN 12811-4 E : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
05/19978685 DC : 0 BS EN 74-3 - COUPLERS, SPIGOT PINS AND BASE PLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST METHODS
DIN EN 16704-2-2 E : 2017 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
BS EN 12811-4:2013 Temporary works equipment Protection fans for scaffolds. Performance requirements and product design
UNI EN 16031 : 2012 ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
DIN EN 14653-2:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST
DIN EN 14653-1:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
BS EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes - Requirements and test procedures
BS EN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
EN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
EN 16508:2015 Temporary works equipment - Encapsulation constructions - Performance requirements and general design
EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
EN 16031:2012 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
09/30211977 DC : 0 BS EN 16031 - ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
BS EN 16508:2015 Temporary works equipment. Encapsulation constructions. Performance requirements and general design
DIN EN 12811-4:2014-03 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
DIN EN 74-2:2009-01 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
UNE-EN 12811-4:2015 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
UNE-EN 14653-2:2012 Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
UNE-EN 16031:2013 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
BS EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support Product specifications
BS EN 1004:2004 Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements
EN 12811-4:2013 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
DIN EN 16704-2-2:2017-03 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
EN 1004:2004 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements

EN 10113-2 : 1993 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
EN 729-2 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
EN 39:2001 Loose steel tubes for tube and coupler scaffold - Technical delivery conditions
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 485-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 719 : 1994 WELDING COORDINATION - TASKS AND RESPONSIBILITIES
EN 1562:2012 Founding - Malleable cast irons
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 390:1994 Glued laminated timber - Sizes - Permissible deviations
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
ENV 1999-1-1 : 1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
EN 287-2:1992/A1:1997 APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 336:2013 Structural timber - Sizes, permitted deviations
EN 729-1 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE
EN 386:2001 Glued laminated timber - Performance requirements and minimum production requirements
EN 1179:2003 Zinc an zinc alloys - Primary zinc
EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 10204:2004 Metallic products - Types of inspection documents
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 338:2016 Structural timber - Strength classes
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
ENV 1993-1-3:1996/AC:1997 EUROCODE 3: DESIGN OF STEEL STRUCTURES - GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 729-3 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 1193 : 1997 TIMBER STRUCTURES - STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER - DETERMINATION OF SHEAR STRENGTH AND MECHANICAL PROPERTIES PERPENDICULAR TO THE GRAIN
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.