EN 13001-1:2015
Current
Current
The latest, up-to-date edition.
Cranes - General design - Part 1: General principles and requirements
Published date
04-08-2015
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Safety requirements and/or measures
Annex A (informative) - Selection of a suitable set of crane
standards for a given application
Annex B (informative) - Discreet and continuous distributions
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
This European Standard specifies general principles and requirements to be used together with EN 13001 2 and the EN 13001 3 series of standards, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and a method of verification of those requirements.NOTESpecific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this European Standard is necessary to reduce or eliminate the risks associated with the following hazards:a)instability of the crane or its parts (tilting);b)exceeding the limits of strength (yield, ultimate, fatigue);c)elastic instability of the crane or its parts (buckling, bulging);d)exceeding temperature limits of material or components;e)exceeding the deformation limits.This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SS-EN 13001-1:2015 | Identical |
| I.S. EN 13001-1:2015 | Identical |
| UNE-EN 13001-1:2015 | Identical |
| UNI EN 13001-1:2015 | Identical |
| BS EN 13001-1:2015 | Identical |
| NBN EN 13001-1 : 2015 | Identical |
| NF EN 13001-1 : 2015 | Identical |
| UNI EN 13001-1 : 2009 | Identical |
| NS EN 13001-1 : 2015 | Identical |
| DIN EN 13001-1:2015-06 | Identical |
| PN EN 13001-1 : 2015 | Identical |
| NEN EN 13001-1 : 2015 | Identical |
| SN EN 13001-1 : 2015 | Identical |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| 11/30236563 DC : 0 | BS EN 16228-4 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT |
| 13/30285283 DC : 0 | BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 17/30360261 DC : 0 | BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| DIN EN 13001-3-2:2015-10 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| Z150.3-17 | Safety code on articulating boom cranes |
| 10/30228230 DC : 0 | BS EN 13001-2 - CRANES - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| 07/30172833 DC : DRAFT DEC 2007 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 13001-3-2 E : 2015 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| 12/30265276 DC : 0 | BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| I.S. EN 13001-3-2:2014 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| 04/30058232 DC : DRAFT OCT 2004 | EN 12999 A2 - CRANES - LOADER CRANES |
| I.S. EN 13001-3-3:2014 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| S.R. CEN TS 13001-3-5:2010 | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| BS EN 13001-3-1 : 2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| UNI EN 13001-3-1 : 2013 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| EN 13001-3-6:2018 | Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders |
| DIN EN 14985 E : 2012 | CRANES - SLEWING JIB CRANES |
| DIN EN 14238 E : 2010 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 12644-1 : 2001 | CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| DIN EN 13001-3-3:2015-02 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13001-3-1:2012+A2:2018 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
| CEN/TS 13001-3-1:2004/AC:2006 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 07/30161753 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNE-EN 13001-3-3:2015 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| DIN EN 16228-5:2014-10 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| DD CEN/TS 13001-3-1 : 2004 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| 12/30261638 DC : 0 | BS EN 13001-2 - CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 13155 : DRAFT 2017 | CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 13001-2 : DRAFT 2012 | CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. EN 12999:2011 | CRANES - LOADER CRANES |
| UNE-EN 16228-5:2015 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| 14/30285286 DC : 0 | BS EN 14439 - CRANES - SAFETY - TOWER CRANES |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 12999:2013-02 | CRANES - LOADER CRANES |
| EN 12999:2011+A2:2018 | Cranes - Loader cranes |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14238:2010-02 | Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 15056 : 2006 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| BS EN 14238 : 2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| BS EN 1991-3:2006 | Eurocode 1. Actions on structures Actions induced by cranes and machinery |
| UNE-EN 13135-2:2005 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN 15056:2006 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| I.S. EN 14439:2006 | CRANES - SAFETY - TOWER CRANES |
| I.S. EN 14238:2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 13001-2:2014 | CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| VDI 3650:2013-02 | Equipment for protecting cranes against drifting caused by wind |
| VDI 2381 Blatt 1:2009-07 | Final inspection of stationary and track-bound cranes - Instructionals form for experts |
| VDI 4449:2009-04 | Guidance on the modification of crane systems |
| UNI CEN/TS 13001-3-2 : 2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| I.S. EN 1991-3:2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| 12/30265273 DC : DRAFT OCT 2012 | BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 04/30116569 DC : DRAFT NOV 2004 | EN 15056 - CRANES - REQUIREMENTS FOR SPREADERS |
| BS EN 13001-3-3:2014 | Cranes. General design Limit states and proof of competence of wheel/rail contacts |
| BS EN 12999 : 2011 | CRANES - LOADER CRANES |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 13001-3-3 E : 2015 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 04/30058509 DC : DRAFT JUNE 2004 | BS EN 14985 - CRANES - SLEWING JIB CRANES |
| BS EN 16228-5:2014 | Drilling and foundation equipment. Safety Diaphragm walling equipment |
| I.S. CEN TS 13001-3-2:2005 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| UNI CEN/TS 13001-3-1 : 2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| 16/30322061 DC : DRAFT MAR 2016 | BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| 08/30181655 DC : DRAFT SEP 2008 | BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| UNE-EN 13001-3-2:2015 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| NF EN 15746-2 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 16228-5:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| I.S. CEN TS 13001-3-1:2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 13135-2 : 2004 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 13135-2 : 2010 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 15056 : 2009 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| UNI EN 14439 : 2009 | CRANES - SAFETY - TOWER CRANES |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 14238 : 2009 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1991-3 : 2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| BS EN 16851:2017 | Cranes. Light crane systems |
| 16/30322064 DC : DRAFT MAR 2016 | BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS |
| BS EN 13001-3-2:2014 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| UNI EN 16228-5 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| I.S. EN 13001-3-6:2018 | CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| XP CEN/TS 13001-3-5 : 2010 XP | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS |
| I.S. EN 13001-3-1:2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 12999:2011 | Cranes - Loader cranes |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| DIN EN 15056 E : 2010 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| DIN EN 1991-3:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| BS EN 13001-2:2014 | Crane safety. General design Load actions |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| UNE-EN 13001-2:2015 | Crane safety - General design - Part 2: Load actions |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| DIN EN 15056:2010-02 | Cranes - Requirements for container handling spreaders (includes Amendment A1:2009) |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
| EN 15056:2006+A1:2009 | Cranes - Requirements for container handling spreaders |
| EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 1991-3:2006/AC:2012 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 11/30236567 DC : 0 | BS EN 16228-5 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| DD CEN/TS 13001-3-5:2010 | Cranes. General design Limit states and proof of competence of forged hooks |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| PREN 14439 : DRAFT 2014 | CRANES - SAFETY - TOWER CRANES |
| S.R. CEN TS 13001-3-2:2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 14/30285289 DC : 0 | BS EN 13155 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| BS EN 13001-3-5:2016 | Cranes. General design Limit states and proof of competence of forged hooks |
| 07/30164729 DC : 0 | BS EN 12999 - CRANES - LOADER CRANES |
| DD CEN/TS 13001-3-2:2004 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| I.S. ENV 1993-6:1999 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 13001-3-1:2013-12 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13135-2:2011-07 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN 13001-2:2014-12 | Crane safety - General design - Part 2: Load actions |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| EN 16228-5:2014 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| EN 14502-1:2010 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| EN 14502-2:2005+A1:2008 | Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| ISO 2394:2015 | General principles on reliability for structures |
| EN 13586:2004+A1:2008 | Cranes - Access |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 14439:2006+A2:2009 | Cranes - Safety - Tower cranes |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| EN 13157:2004+A1:2009 | Cranes - Safety - Hand powered cranes |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 15056:2006+A1:2009 | Cranes - Requirements for container handling spreaders |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.