EN 13032-4:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
07-05-2019
06-10-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Laboratory requirements
5 Preparation, mounting and operating conditions
6 Measurement of photometric quantities
7 Measurement of colour quantities
8 Measurement Uncertainties
9 Presentation of test results
Annex A (informative) - Guidance on the Application of this standard
Annex B (informative) - Stray light - Screening against stray light
in a goniophotometer
Annex C (informative) - Practical laboratory conditions
Annex D (informative) - Guidance on calculating measurement
uncertainties
Annex E (informative) - Guidance for determining rated values of
photometric quantities of LED luminaires
Bibliography
This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromaticity coordinates, correlated color temperature (CCT), Color Rendering Index (CRI), and spatial uniformity of chromaticity.This standard does not cover LED packages and products based on OLEDs (organic LEDs).NOTEWhere the term "LED product, LED device or DUT (device under test)" is used, the term covers LED lamps, modules, light engines or luminaires.
| Committee |
CEN/TC 169
|
| DevelopmentNote |
Supersedes PREN 13032-4. (06/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SS-EN 13032-4:2015 | Identical |
| NEN EN 13032-4 : 2015 | Identical |
| I.S. EN 13032-4:2015 | Identical |
| SN EN 13032-4 : 2015 | Identical |
| BS EN 13032-4:2015 | Identical |
| UNI EN 13032-4:2015-08 | Identical |
| NF EN 13032-4:2015 | Identical |
| UNI EN 13032-4 : 2015 COR 1 2016 | Identical |
| PN EN 13032-4 : 2015 | Identical |
| NBN EN 13032-4 : 2015 | Identical |
| DIN EN 13032-4:2015-08 | Identical |
| NS EN 13032-4 : 2015 | Identical |
| DIN EN 13032-4 E : 2015 | Identical |
| UNI EN 13032-4:2015 | Identical |
| UNE-EN 13032-4:2016 | Identical |
| ONORM EN 13032-4 : 2015 | Identical |
| 16/30337838 DC | BS EN 62612 AMD1. Self-ballasted LED lamps for general lighting services with supply voltages > 50 V. Performance requirements |
| 16/30345783 DC : 0 | BS EN 13032-2 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| CEI EN 62717 : 2017 | LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| 17/30370985 DC : 0 | BS EN 4705 - AEROSPACE SERIES - MEASUREMENT METHODS REGARDING THE LIFETIME BEHAVIOUR OF LIGHT UNITS IN A STANDARDIZED AIRCRAFT-RELATED ENVIRONMENT |
| I.S. EN 62717:2017 | LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| BS EN 60357 : 2003 | TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS (IEC 60357:2002, MODIFIED) |
| EN 62717:2017 | LED modules for general lighting - Performance requirements |
| I.S. EN 61167:2016 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
| BS ISO 17772-1:2017 | Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| BS EN 61167:2011 | Metal halide lamps. Performance specification |
| I.S. EN 13032-2:2017 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| EN 61167:2016 | Metal halide lamps - Performance specification |
| ISO 17772-1:2017 | Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| 16/30336682 DC : 0 | BS EN 62717 ED1.0 - LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| 15/30333848 DC : 0 | BS EN 60357:2003/PRAA:2015 - TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
| PREN 13032-2 : DRAFT 2016 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| EN 13032-2:2017 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places |
| I.S. EN 60357:2003 | TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
| EN 60357:2003/A11:2016 | TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
| ISO 11664-3:2012 | Colorimetry Part 3: CIE tristimulus values |
| EN 62031:2008/A2:2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| IEC TR 60725:2012 | Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase |
| PREN 62717 : DRAFT 2016 | LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS (IEC 62717:2014, MODIFIED + A1:2015, MODIFIED) |
| IEC TR 61341:2010 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| EN 62722-1:2016 | Luminaire performance - Part 1: General requirements |
| EN 62384:2006/A1:2009 | DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| EN ISO 11664-1:2011 | Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007) |
| ISO 23539:2005 | Photometry — The CIE system of physical photometry |
| EN 62722-2-1:2016 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
| EN 61341:2011 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| ISO/CIE 19476:2014 | Characterization of the performance of illuminance meters and luminance meters |
| IES LM 78 : 2007 | TOTAL FLUX MEASUREMENT OF LAMPS USING AN INTEGRATING SPHERE |
| IEC GUIDE 115:2007 | Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector |
| IEC 62504:2014 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
| AS/NZS 5341:2021 | LED lamps - Test methods - Energy and functional performance |
| EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| ANSI C78.377 : 2015 | ELECTRIC LAMPS - SPECIFICATIONS FOR THE CHROMATICITY OF SOLID-STATE LIGHTING PRODUCTS |
| EN ISO 11664-3:2013 | Colorimetry - Part 3: CIE tristimulus values (ISO 11664-3:2012) |
| ECA ILAC P10 : 2013 | ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
| IES LM 79 : 2008 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.