• There are no items in your cart

EN 13036-1:2010

Current
Current

The latest, up-to-date edition.

Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
Published date

05-26-2010

Foreword
Introduction
1 Scope
2 Normative references
3 Test method
4 Material and apparatus
5 Procedure
6 Calculation of surface mean texture depth
7 Safety considerations
8 Test report
9 Precision of the method
Annex A (informative)
Bibliography

This European Standard specifies a method for determining the average depth of pavement surfacemacrotexture by careful application of a known volume of material on the surface and subsequentmeasurement of the total area covered. The technique is designed to provide an average depth value of onlythe pavement macrotexture and is considered insensitive to pavement microtexture characteristics.This test method is suitable for field tests to determine the average macrotexture depth of a pavementsurface. When used in conjunction with other physical tests, the macrotexture depth values derived from thistest method can be used to determine the pavement skid resistance capability, noise characteristics and thesuitability of paving materials or finishing techniques. When used with other tests, care should be taken that alltests are applied at the same location.

Committee
CEN/TC 227
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

I.S. EN 12271:2006 SURFACE DRESSING - REQUIREMENTS
DIN EN ISO 13473-5:2010-04 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
UNI EN 12273 : 2008 SLURRY SURFACING - REQUIREMENTS
I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS
ISO 23671:2015 Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres
I.S. EN 12697-40:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 40: IN SITU DRAINABILITY
BS EN 13197 : 2011 ROAD MARKING MATERIALS - WEAR SIMULATOR TURNTABLE
EN 12274-8:2005 Slurry surfacing - Test methods - Part 8: Visual assessment of defects
EN 13036-3:2002 Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability
EN 12273:2008 Slurry surfacing - Requirements
EN 12271:2006 Surface dressing - Requirements
CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
DD CEN/TS 13036-2:2010 Road and airfield surface characteristics. Test methods Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
PD CEN/TS 16811-3:2015 Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods
BS ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis
I.S. EN ISO 13473-5:2009 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
NF ISO 15222 : 2011 TRUCK AND BUS TYRES - METHOD FOR MEASURING RELATIVE WET GRIP PERFORMANCE - LOADED NEW TYRES
PREN 13036-4 : DRAFT 2009 METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST
DIN EN 13197:2014-07 ROAD MARKING MATERIALS - WEAR SIMULATOR TURNTABLE
DIN EN 13036-4:2011-12 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
I.S. EN 13036-4:2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
UNI EN 1824 : 2011 ROAD MARKING MATERIALS - ROAD TRIALS
I.S. EN 1824:2011 ROAD MARKING MATERIALS - ROAD TRIALS
I.S. EN 13197:2011 ROAD MARKING MATERIALS - WEAR SIMULATOR TURNTABLE
DIN EN 1824:2011-12 ROAD MARKING MATERIALS - ROAD TRIALS
DIN EN 13197:2001-07 ROAD MARKING MATERIALS - WEAR SIMULATOR TURNTABLE
UNI EN 13197 : 2014 ROAD MARKING MATERIALS - WEAR SIMULATOR TURNTABLE
UNI EN 13036-4 : 2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
UNI CEN/TS 13036-2 : 2010 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: ASSESSMENT OF THE SKID RESISTANCE OF A ROAD PAVEMENT SURFACE BY THE USE OF DYNAMIC MEASURING SYSTEMS
BS ISO 15222:2011 Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis
BS ISO 13473-5 : 2009 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
BS ISO 23671:2015 Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
09/30207051 DC : 0 BS EN 13036-4 - METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST
S.R. CEN/TS 13036-2:2010 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: ASSESSMENT OF THE SKID RESISTANCE OF A ROAD PAVEMENT SURFACE BY THE USE OF DYNAMIC MEASURING SYSTEMS
PREN 13375 : DRAFT 2017 FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION
DIN EN 12271:2007-03 Surface dressing - Requirements
DIN EN 12274-8:2005-12 Slurry surfacing - Test methods - Part 8: Visual assessment of defects
DIN EN 13036-3 E : 2003 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY
BS EN 12271:2006 Surface dressing. Requirements
UNE-EN 1824:2012 Road marking materials - Road trials
EN 1824:2011 Road marking materials - Road trials
17/30309711 DC : 0 BS EN ISO 13473-1 - CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
08/30184624 DC : DRAFT SEP 2008 BS EN 13197 - ROAD MARKING MATERIALS - WEAR SIMULATOR - TURNTABLE
UNI CEN/TS 15366 : 2010 WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - SOLID ABSORBENTS INTENDED FOR ROAD USAGE
06/30149762 DC : 0 EN 12273 - SLURRY SURFACING - SPECIFICATIONS
DIN EN 12273:2008-08 Slurry surfacing - Requirements
BS EN ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles Determination of megatexture
DIN ISO 13473-5:2009-10 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
17/30360281 DC : 0 BS EN 13375 - FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION
ISO 15222:2011 Truck and bus tyres Method for measuring relative wet grip performance Loaded new tyres
DIN EN 13036-4 E : 2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
BS EN 13036-3:2002 Road and airfield surface characteristics. Test methods Measurement of pavement surface horizontal drainability
BS EN 1824:2011 Road marking materials. Road trials
BS EN 12274-8:2005 Slurry surfacing. Test methods Visual assessment of defects
BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test
UNE-EN 12697-40:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles Part 5: Determination of megatexture
UNE-EN 13197:2012 Road marking materials - Wear simulator Turntable
EN 12697-40:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
DIN EN 13036-3:2003-06 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY
EN ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
EN 13197:2011+A1:2014 Road marking materials - Wear simulator Turntable
UNE-EN ISO 13473-5:2010 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
08/30184618 DC : DRAFT SEP 2008 BS EN 1824 - ROAD MARKING MATERIALS - ROAD TRIALS
02/101726 DC : 0 PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE
S.R. CEN/TS 15366:2009 WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - SOLID ABSORBENTS INTENDED FOR ROAD USAGE
04/30123462 DC : DRAFT OCT 2004 EN 12271 - SURFACE DRESSING
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
DD CEN/TS 15366:2009 Winter and road service area maintenance equipment. Solid absorbents intended for road usage
S.R. CWA 17089:2016 INDICATORS FOR THE SUSTAINABILITY ASSESSMENT OF ROADS
11/30249131 DC : 0 BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS
BS EN 12273:2008 Slurry surfacing. Requirements
04/100845 DC : DRAFT JAN 2004 EN 12697-40 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 40: IN-SITU DRAINABILITY
S.R. CEN/TS 16811-3:2015 WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
UNI EN ISO 13473-5 : 2010 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
UNE-EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
UNI EN 12697-40 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 40: IN SITU DRAINABILITY
BS EN 12697-40:2012 Bituminous mixtures. Test methods for hot mix asphalt In situ drainability
CEN/TS 15366:2009 Winter and road service area maintenance equipment - Solid absorbents intended for road usage
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
DIN EN 12697-40:2012-09 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 40: IN SITU DRAINABILITY

ISO 10844:2014 Acoustics Specification of test tracks for measuring noise emitted by road vehicles and their tyres
BS 812-114:1989 Testing aggregates Method for determination of the polished-stone value
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ASTM E 965 : 2015 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.