EN 13094:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
Superseded date
08-25-2020
Published date
05-06-2015
Publisher
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Breather device and safety device
5 Materials
6 Design
7 Manufacture
Annex A (normative) - Methods of design verification
Annex B (normative) - Method of measurement of specific
resilience
Annex C (normative) - Design of neckrings, flanges and
closures
Annex D (informative) - Examples of welding details
Bibliography
This European Standard specifies requirements for the design and construction of metallic tanks with a maximum working pressure not exceeding 50 kPa gauge used for the transport of dangerous goods by road and rail for which Tank Code with letter “G” is given in Chapter 3.2 of ADR [2]. It also includes requirements for a system of identification of materials used in the construction of these tanks.This European Standard specifies requirements for openings, closures and structural equipment.NOTE 1This document does not specify requirements for service equipment.This European Standard is applicable to aircraft refuellers that are used on public roads. It is also applicable to inter-modal tanks (e.g. tank containers and tank swap bodies) for the transport of dangerous goods by road and rail.NOTE 2This document is not applicable to fixed rail tank wagons.
| DevelopmentNote |
Supersedes PREN 13094. (05/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 13094 : 2015 | Identical |
| NF EN 13094 : 2015 | Identical |
| NBN EN 13094 : 2015 | Identical |
| NEN EN 13094 : 2015 | Identical |
| NS EN 13094 : 2015 | Identical |
| I.S. EN 13094:2015 | Identical |
| UNE-EN 13094:2015 | Identical |
| PN EN 13094 : 2015 | Identical |
| SN EN 13094 : 2015 | Identical |
| UNI EN 13094 : 2008 | Identical |
| BS EN 13094:2015 | Identical |
| DIN EN 13094:2015-07 | Identical |
| UNE-EN 15208:2014 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
| 11/30243007 DC : 0 | BS EN 14564 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 11/30253745 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| EN 12972:2015 | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| 17/30363721 DC : 0 | BS EN 14564 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 17/30362892 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| DIN EN 12972:2015-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN 15208:2014 | Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications |
| DIN EN 12312-5:2009-08 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009) |
| I.S. EN 14564:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| DIN EN 15208:2014-07 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| BS EN 14564:2013 | Tanks for transport of dangerous goods. Terminology |
| I.S. EN 12312-5:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| I.S. EN 15208:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
| PREN 14564 : DRAFT 2017 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| UNI EN 14564 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| DIN EN 14564 E : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| UNE-EN 12972:2015 | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| DIN EN 13317:2007-02 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| I.S. EN 12972:2015 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN 14025 : 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| EN 14025:2013+A1:2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| EN 13317:2002+A1:2006 | Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
| DIN EN 12312-5 E : 2009 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| BS EN 12972:2015 | Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks |
| BS EN 12312-5 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| UNI EN 15208 : 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| I.S. EN 13317:2002 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| PREN 13317 : DRAFT 2017 | TANKS FOR TRANSPORTING DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| 12/30261228 DC : 0 | BS EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| NFM 88 160 : 2009 | TANKS FOR TRANSPORT OF DANGEROUS LIQUID GOODS - SERVICE EQUIPMENT FOR TANKS - DOMES WITH INSPECTION OPENING |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN 13317:2002 | Tanks for transport of dangerous goods. Service equipment for Tanks. Manhole cover assembly |
| UNE-EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| UNE-EN 14025:2014 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN 15208:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| 17/30341741 DC : 0 | BS EN 13317 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| DIN EN 14564:2013-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| I.S. EN 14025:2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| UNI EN 13317 : 2007 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| EN 14025:2013+A1:2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 15609-2:2001/A1:2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| EN 12972:2015 | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003) |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| ISO 1496-3:1995 | Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
| EN 13317:2002+A1:2006 | Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.