EN 13141-5:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
11-21-2020
10-27-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance testing of aerodynamic characteristics
4.1 Pressure drop
4.1.1 Test installation
4.1.2 Test procedure
4.1.3 Analysis of results
4.2 Suction effect of a cowl
4.2.1 Test installation and conditions
4.2.2 Measurement conditions and uncertainties
4.2.3 Preliminary test
4.2.4 Wind effect and flow rate tests
4.2.5 Test procedure
4.2.6 Analysis of results
4.3 Presentation of results
5 Additional testing for fan assisted cowls
5.1 General
5.2 Aerodynamic testing
5.3 Acoustic testing
5.4 Effective power input
5.4.1 Test Method
5.4.2 Analysis of results
5.4.3 Presentation of results
Annex A (normative) Derivation of values through the
similitude law
Bibliography
This document specifies methods for measuring the aerodynamic and acoustic characteristics of cowls and roof outlets used in both natural and mechanical ventilation. Only those cowls and roof outlets fitted onto ducts which project above the roof surface are covered by the present standard.Regarding the assisted cowls, only the fan assisted cowls are covered by the present standard, other types (such as injection assisted cowls) being too recent to be adequately considered for the time being.The performance testing of the "assistance" provided by the auxiliary fan of an assisted cowl is excluded for the scope of this standard.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNI EN 13141-5:2021 | Identical |
| ONORM EN 13141-5 : 2005 | Identical |
| UNE-EN 13141-5:2005 | Identical |
| DIN EN 13141-5:2005-01 | Identical |
| NS EN 13141-5 : 1ED 2005 | Identical |
| BS EN 13141-5:2004 | Identical |
| NF EN 13141-5 : 2005 | Identical |
| NBN EN 13141-5 : 2005 | Identical |
| PN EN 13141-5 : 2006 | Identical |
| I.S. EN 13141-5:2004 | Identical |
| UNI EN 13141-5 : 2005 | Identical |
| SN EN 13141-5 : 2004 | Identical |
| NEN EN 13141-5 : 2004 | Identical |
| EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| 12/30259182 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| UNI EN 13142 : 2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| EN 12354-5:2009/AC:2010 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| DIN EN 15242 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| PREN 13142 : DRAFT 2012 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| DIN EN 13465:2004-05 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN DWELLINGS |
| I.S. EN 13142:2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| DIN EN 13142:2013-06 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| UNI EN 15242 : 2008 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| DIN EN 15242:2007-09 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| EN 16798-7:2017 | Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| I.S. EN 16798-7:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 7: CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION (MODULES M5-5) |
| BS EN 16798-7:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| 15/30297495 DC : 0 | BS EN 16798-7 - ENERGY PERFORMANCE OF BUILDINGS - PART 7: VENTILATION FOR BUILDINGS - MODULES M5-1, M5-5, M5-6, M5-8 - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| 11/30234297 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| 05/30128642 DC : 0 | PREN 15242 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| I.S. EN 15242:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| NFP 50 413 : 1993 | VENTILATION - CONDUITS DE VENTILATION NATURELLE ET CONDUITS DE FUMEE - CODE D'ESSAI ET CLASSEMENT DES EXTRACTEURS STATIQUES |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN 13141-4:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.