EN 13141-7:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
Superseded date
04-26-2021
Published date
11-03-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and classification
4 Symbols and abbreviations
5 Requirements
6 Test methods
7 Test results
Annex A (informative) - Example of some possible arrangements
of heat recovery heat exchanger and/or heat pumps for
category I
Annex B (normative) - Pressure leakage test method
Annex C (normative) - Tracer gas test method
Bibliography
This part of EN 13141 specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performance, and the electrical performance characteristic of a mechanical supply and exhaust ventilation units used in a single dwelling.It covers unit that contain at least, within one or more casing:-supply and exhaust air fans;-air filters;-air-to-air heat exchanger and/or Extract Air-to-Outdoor Air heat pump for extract air heat recovery;-control system.Such unit can be provided in more than one assembly, the separate assemblies of which are designed to be used together.The different possible arrangements of heat recovery heat exchangers and/or heat pumps are described in Annex A.This standard does not deal with non-ducted units or reciprocating heat exchangers. This standard does not deal with units that supply several dwellings.This standard does not cover ventilation systems that may also provide water space heating and hot water.This standard does not cover units including combustion engine driven compression heat pumps and absorption heat pumps.Electrical safety requirements are given in EN 60335-2-40 and EN 60335-2-80.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 13141-7:2011-01 | Identical |
| BS EN 13141-7:2010 | Identical |
| NS EN 13141-7 : 2010 | Identical |
| SN EN 13141-7 : 2010 | Identical |
| SS-EN 13141-7:2010 | Identical |
| UNI EN 13141-7 : 2011 | Identical |
| PN EN 13141-7 : 2010 | Identical |
| UNE-EN 13141-7:2011 | Identical |
| NBN EN 13141-7 : 2010 | Identical |
| NEN EN 13141-7 : 2010 | Identical |
| NF EN 13141-7 : 2011 | Identical |
| I.S. EN 13141-7:2010 | Identical |
| ONORM EN 13141-7 : 2010 | Identical |
| EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| 12/30259182 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| I.S. EN 13141-11:2015 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| I.S. EN 16798-5-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-1: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 1: DISTRIBUTION AND GENERATION |
| UNE-EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| EN 16798-5-2:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation |
| UNI EN 13142 : 2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| DIN EN 13141-6:2015-02 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| I.S. EN 13141-6:2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| EN 12354-5:2009/AC:2010 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| BS EN 15241:2007 | Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings |
| BS EN 16573:2017 | Ventilation for Buildings. Performance testing of components for residential buildings. Multifunctional balanced ventilation units for single family dwellings, including heat pumps |
| DIN EN 16798-5-2 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| 13/30267124 DC : 0 | BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS |
| DIN EN 13141-11 E : 2015 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| I.S. EN 16573:2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS FOR RESIDENTIAL BUILDINGS - MULTIFUNCTIONAL BALANCED VENTILATION UNITS FOR SINGLE FAMILY DWELLINGS, INCLUDING HEAT PUMPS |
| DIN EN 15241:2011-06 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 16798-5-2:2015-06 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| PREN 13142 : DRAFT 2012 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| I.S. EN 16798-5-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| I.S. EN 13142:2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| 13/30275116 DC : 0 | BS EN 16573 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS FOR RESIDENTIAL BUILDINGS - MULTIFUNCTIONAL BALANCED VENTILATION UNITS FOR SINGLE FAMILY DWELLINGS, INCLUDING HEAT PUMPS |
| I.S. EN 15241:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 13142:2013-06 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| BS EN 13141-11:2015 | Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units |
| BS EN 16798-5-2:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 2: Distribution and generation |
| DIN EN 15241 E : 2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| EN 16798-5-1:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| UNE-EN 13141-6:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| EN 16573:2017 | Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 13141-11:2015-07 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| BS EN 16798-5-1:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation |
| 11/30234297 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| BS EN 13141-6:2014 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling |
| DIN EN 16798-5-2:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| EN 13141-6:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| EN 60335-2-40:2003/A13:2012/AC:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN ISO 3743-2:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| EN ISO 5135 : 1998 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL DEVICES, AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN A REVERBERATION ROOM |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 12102:2013 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| IEC 60335-2-40:2013+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditionersand dehumidifiers |
| IEC 60335-2-80:2015 RLV | Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 3745:2012/A1:2017 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017) |
| EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| EN 306:1997 | Heat exchangers - Methods of measuring the parameters necessary for establishing the performance |
| EN 13141-4:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| ISO 5135:1997 | Acoustics Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN ISO 9614-2 : 1996 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.