• There are no items in your cart

EN 13162:2012+A1:2015

Current
Current

The latest, up-to-date edition.

Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Published date

02-18-2015

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
  terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
  Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values
        of thermal resistance and thermal conductivity .
Annex B (normative) - Product type determination (PTD)
        and factory production control (FPC)
Annex C (normative) - MW multi-layered insulation products
Annex D (informative) - Examples for the determination of
        the declared values of thermal resistance and thermal
        conductivity for a product or a product group
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Regulation
Bibliography

This European Standard specifies the requirements for factory made mineral wool products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the mat blankets, boards or slabs.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 °C are not covered by this standard. This standard does not cover in situ insulation products (covered by EN 14064 parts 1 and 2) and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14303).

DevelopmentNote
Supersedes PREN 13162. (01/2013) 2012 Edition Re-Issued in February 2015 & incorporates AMD 1 2015. (03/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

PREN 13830 : DRAFT 2013 CURTAIN WALLING - PRODUCT STANDARD
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
DIN EN 16855-1 E : 2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
11/30238641 DC : 0 BS EN 491 - CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS
07/30167661 DC : DRAFT AUG 2007 BS EN 15715 - THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PREN 16855 : DRAFT 2015 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
PREN 16002 : DRAFT 2016 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
DIN EN 16002:2016-10 (Draft) FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
UNE-EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
I.S. EN 16002:2010 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
I.S. EN 16783:2017 THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
S.R. CEN/TS 16459:2013 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
DIN EN 13500:2003-12 THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
BS EN 13063-2:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions
BS EN 13063-3:2007 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys
BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
UNE-EN 16703:2015 Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
UNE-EN 491:2012 Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
BS EN 13403:2003 Ventilation for buildings. Non metallic ducts. Ductwork made from insulation ductboards
EN 13500:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
DIN EN 13063-3:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 13063-1:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
02/102804 DC : DRAFT APR 2002 PREN 13063-1 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 16783:2017 Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
BS EN 14303 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
13/30281348 DC : 0 BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
03/115371 DC : DRAFT SEP 2003 EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES
PREN 14783 : DRAFT 2012 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
EN 16002:2010 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
I.S. EN 16855-1:2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
UNI EN 15715 : 2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
12/30268937 DC : 0 BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
DIN EN 13063-2 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
DIN EN 1995-1-2 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNE-EN 13830:2016 Curtain walling - Product standard
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 13063-2:2005 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
I.S. EN 14783:2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
I.S. EN 13063-1:2006 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13172:2012 THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY
I.S. EN 491:2011 CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS
DIN EN 16855-1:2017-05 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
VDI 6019 Blatt 2:2009-07 Engineering methods for the dimensioning of systems for the removal of smoke from buildings - Engineering methods
UNI CEN/TS 16459 : 2014 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
14/30293183 DC : 0 BS EN 16703 - ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
14/30301580 DC : 0 BS EN/TC 16783 - THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
BS EN 15715:2009 Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products
15/30320130 DC : 0 BS EN 16855 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
12/30264370 DC : 0 BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 15715:2010-04 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
UNE-EN 13381-4:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
BS EN 16002:2010 Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
I.S. EN 15715:2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
DIN EN 16703 E : 2015 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
DIN EN 14303:2016-08 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNI EN 16002 : 2010 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
DIN EN 13172:2012-04 THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 13063-3 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 14782 E : 2006 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 14783 E : 2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 13172:2012 Thermal insulation products. Evaluation of conformity
EN 13830:2015 Curtain walling - Product standard
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 13172 : 2012 Thermal insulation products - Evaluation of conformity
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 14783 : 2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN 1995-1-2 : 2005 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13403 : 2004 VENTILATION FOR BUILDINGS - NON- METALLIC DUCTS - DUCTWORK MADE FROM INSULATION DUCTBOARDS
UNI EN 491 : 2011 CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS
DIN EN 16703:2015-12 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
PREN 14303 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
UNI EN 13381-4 : 2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
I.S. EN 1995-1-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 16855-1:2015-06 (Draft) WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
DIN EN 13381-4:2013-08 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
02/104193 DC : DRAFT JUN 2002 PREN 13063-2 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
07/30166918 DC : DRAFT AUG 2007 BS EN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
BS EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PD CEN/TS 16459:2013 External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187
UNE-EN 1995-1-2:2016 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
UNE-EN 15715:2012 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
I.S. EN 16703:2015 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
NF EN 16002 : 2010 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
16/30346712 DC : 0 BS EN 16002 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
PREN 16491 : DRAFT 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
DIN EN 13063-1 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
DIN EN 13403:2003-08 VENTILATION FOR BUILDINGS - NON-METALLIC DUCTS - DUCTWORK MADE FROM INSULATION DUCTBOARDS
BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
BS EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements
DIN EN 14783:2013-07 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
BS EN 13063-1:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance
BS EN 13830:2015 Curtain walling. Product standard
UNE-EN 13172:2012 Thermal insulation products - Evaluation of conformity
BS EN 13500:2003 Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
EN 16703:2015 Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
EN 16855-1:2017 Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
EN 14303:2015 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
09/30207859 DC : 0 BS EN 16002 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
PREN 13063-1 : DRAFT 2002 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
17/30354084 DC : 0 BS EN 16855-2 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 2: CUSTOMIZED COLD ROOMS
BS EN 16855-1:2017 Walk-in cold rooms. Definition, thermal insulation performance and test methods Prefabricated cold room kits
PREN 491 : DRAFT 2011 CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 16703:2015 Acoustics. Test code for drywall systems of plasterboard with steel studs. Airborne sound insulation
DIN EN 15715 E : 2010 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
15/30315093 DC : DRAFT MAY 2015 BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13381-4:2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
I.S. EN 14303:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
DIN EN 16002:2010-10 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
EN 13403:2003 Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards
EN 13063-3:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
DIN EN 491:2011-11 Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
EN 13063-2:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
DIN EN 1995-1-2:2010-12 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009)
DIN EN 13063-1:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
DIN EN 13063-2:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members

ISO 9229:2007 Thermal insulation Vocabulary
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
EN 29052-1:1992 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
ISO 9053:1991 Acoustics Materials for acoustical applications Determination of airflow resistance
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
EN ISO 13790:2008 Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008)
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 12087:2013 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 29053:1993 Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)
ISO 11654:1997 Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
ISO 16269-6:2014 Statistical interpretation of data Part 6: Determination of statistical tolerance intervals
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
EN 12430:2013 Thermal insulating products for building applications - Determination of behaviour under point load
EN 1609:2013 Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
ISO 13790:2008 Energy performance of buildings Calculation of energy use for space heating and cooling
ISO 9052-1:1989 Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN ISO 11654:1997 Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN 14064-2:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 14303:2015 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 822:2013 Thermal insulating products for building applications - Determination of length and width

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.