EN 13218:2002+A1:2008/AC:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
12-01-2015
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective
measures
5.1 General
5.2 Mechanical hazards
5.3 Electrical hazards
5.4 Noise
5.5 Vibration
5.6 Hazards resulting from dusts, fumes and mists
5.7 Devices for the use of coolants
5.8 Measures against fire and explosion hazards
5.9 Lighting
5.10 Control systems and control devices
5.11 Electromagnetic compatibility
6 Verification of the safety requirements
and/or measures
7 Information for use
7.1 General
7.2 Instruction handbook
7.3 Marking
Annex A (normative) - Abrasive product guards, workzone
enclosures and their combinations on
stationary grinding machines
A.1 Scope
A.2 Terms and Symbols
A.3 Safety requirements for abrasive
product guards and workzone enclosures
A.3.1 Shapes of abrasive product
guards and angles of aperture
A.3.2 Wall thicknesses and material
A.3.3 Compound abrasive product
guards
A.3.4 Workzone enclosures
A.3.5 Verification of strength, testing
A.3.6 Attachment of transparent screens
in workzone enclosures
A.3.7 Screens for bench and pedestal
grinding machines
A.4 Criteria for the design of abrasive
product guards and their means of
attachment
A.4.1 General
A.4.2 Energy of abrasive product
fragments
A.4.3 Determination of the wall
thicknesses of abrasive product
guards
A.4.4 Design of the means of attachment
Annex B (normative) - Clamping methods for abrasive
products and safety requirements
for tool holding devices
B.1 Scope
B.2 Clamping methods
B.3 General requirements
B.4 Design of flanges
B.4.1 Clamping forces and tightening
torques
B.4.2 Outside clamping diameter,
radial width and covering
B.4.3 Stiffness
B.4.4 Marking of flanges
B.5 Devices for the mounting of
abrasive products by means of
clamping inserts
B.5.1 Central threaded inserts
B.5.2 Method for the determination
of the run-out tolerance for collets
B.5.3 Inserts for abrasive products
type 2, 35, 36, 37
and comparable abrasive products
Annex C (informative) - Calculation of the clamping
force and the tightening torque
for the mounting of abrasive
products by means of flanges
C.1 Symbols
C.2 Operating forces
C.3 Necessary clamping force
C.4 Tightening torque of the screws
C.5 Surface pressure
Annex D (informative) - Noise reduction
D.1 Measures for the reduction of
noise emission
Annex E (normative) - Noise emission determination,
declaration and verification
E.1 Measuring procedure
E.2 Operating conditions
E.3 Declaration and verification of noise
emission values
Annex F (normative) - Requirements for grinding
machines for the machining of
materials generating flammable
and explosive dusts
F.1 Devices for wet grinding
F.2 Devices for dry grinding with
wet precipitation by means of
instantaneous moistening
F.3 Devices for dry grinding with
precipitation by means of a
wet-type cyclone
F.4 Additional requirements, dry grinding
Annex G (informative) - Relevant and special clauses
for different types of stationary
grinding machines
Annex ZA (informative) - Relationship between this
European Standard and the
Essential Requirements of EU
Directives 98/37/EC amended
by Directive 98/79/EC, 89/336/EEC
and 73/23/EEC
Annex ZB (informative) - Relationship between this
European Standard and the
Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Describes the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines.
Committee |
TC 143
|
DevelopmentNote |
2002 Edition Re-Issued in July 2008 & incorporates AMD 1 2008. (08/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
DIN EN 13218:2002-09 | Identical |
NS EN 13218 : 2002 AC 2010 | Identical |
BS EN 13218 : 2002 | Identical |
NF EN 13218 : 2002 + A1 2008 | Identical |
SN EN 13218 : 2002 CORR 2010 | Identical |
DIN EN 13218:2010-09 | Identical |
NEN EN 13218 : 2002 + A1/C2 2010 | Identical |
GOST EN 13218 : 2011 | Identical |
I.S. EN 13218:2002 | Identical |
PN EN 13218 : 2005 + A1 2011 | Identical |
NBN EN 13218 : 2002 COR 2010 | Identical |
UNI EN 13218 : 2008 | Identical |
UNE-EN 13218:2003 | Identical |
GOST R EN 13218 : 2006 | Identical |
BS EN 13218:2002+A1:2008 | Identical |
I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
DIN EN ISO 16089 E : 2016 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
08/30182212 DC : DRAFT SEP 2008 | BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY |
I.S. EN 12413:2007 | SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS |
UNI EN 12413 : 2011 | SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS |
BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
BS EN 12387 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
EN 12413:2007+A1:2011 | Safety requirements for bonded abrasive products |
DIN EN 12413:2011-05 | SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS |
DIN EN 12387:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009) |
DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
I.S. EN 12387:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
UNI EN 12387 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
BS EN 13236 : 2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
BS EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools Particular requirements for bench grinders |
08/30189270 DC : 0 | BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders |
UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
UNI EN 13236 : 2011 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
15/30330735 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
08/30189962 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
EN 13236:2010+A1:2015 | Safety requirements for superabrasive products |
BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
BS EN 12413 : 2007 | SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS |
ISO 23125:2015 | Machine tools Safety Turning machines |
BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNE EN 12413 : 0 | SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS |
UNE-EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders |
EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
EN 14070:2003+A1:2009/AC:2010 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
DIN EN 13236:2016-05 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
I.S. EN 13236:2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
EN 12387:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
EN 13236:2010+A1:2015 | Safety requirements for superabrasive products |
EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
EN 12413:2007+A1:2011 | Safety requirements for bonded abrasive products |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
EN 1033 : 1995 | HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL |
EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
ISO 1052:1982 | Steels for general engineering purposes |
CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
ISO 6103:2014 | Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
EN 50081-2:1993 | Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment |
EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN 729-1 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE |
EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
ISO 6361-2:2014 | Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 666:2012 | Machine tools — Mounting of grinding wheels by means of hub flanges |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
ENV 26385 : 1990 | ERGONOMIC PRINCIPLES OF THE DESIGN OF WORK SYSTEMS |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN 50082-2 : 95 AC 95 | ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO 6316:2012 | Hot-rolled steel strip of structural quality |
EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
ISO 6385:2016 | Ergonomics principles in the design of work systems |
ISO 3522:2007 | Aluminium and aluminium alloys Castings Chemical composition and mechanical properties |
EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
EN 25817 : 1992 | ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
ISO 230-5:2000 | Test code for machine tools Part 5: Determination of the noise emission |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.