EN 13297:2007/AC:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
05-01-2014
01-12-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description of categories and levels of use
5 Identification requirements
6 Basic requirements
7 Level of use classification
8 Luxury rating requirements
9 Performance properties
10 Report
11 Symbols
Annex A (normative) - Additional requirements for tiles
Annex B (normative) - Suitability for under-floor heating
Annex C (normative) - Colour change due to soiling subsequent
spilled water
Annex D (normative) - Summary test report
Annex E (normative) - Criteria for the assessment of stair
suitability
Bibliography
Defines and specifies needled pile floor coverings in sheet form including use classification according to wear and appearance retention.
Committee |
TC 134
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
DIN EN 13297:2000-11 | Identical |
PN EN 13297 : 2009 | Identical |
NF EN 13297 : 2008 | Identical |
DIN EN 13297:2007-12 | Identical |
SN EN 13297 : 2007 | Identical |
I.S. EN 13297:2007 | Identical |
BS EN 13297:2007 | Identical |
NBN EN 13297 : 2007 COR 2008 | Identical |
NS EN 13297 : 2007 AC 2008 | Identical |
NEN EN 13297 : 2007 C1 2008 | Identical |
UNI EN 13297 : 2008 | Identical |
UNE-EN 13297:2008 | Identical |
13/30287620 DC : DRAFT DEC 2013 | BS ISO 12951 - TEXTILE FLOOR COVERINGS - DETERMINATION OF MASS LOSS, FIBRE BIND AND STAIR NOSING APPEARANCE CHANGE USING THE LISSON TETRAD MACHINE |
S.R. CEN/TS 14472-2:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 2: TEXTILE FLOOR COVERINGS |
05/30115063 DC : DRAFT FEB 2005 | BS EN 1963 - TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TRETRAD MACHINE |
DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
CEN/TS 14159:2007 | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
DIN EN 14259 E : 2004 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
BS EN ISO 9094-1:2003 | Small craft. Fire protection Craft with a hull length of up to and including 15 m |
CEN/TS 14472-2:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
DD CEN/TS 14159:2007 | Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
04/19993011 DC : DRAFT JUN 2004 | BS EN 14904 - SURFACES FOR SPORTS AREAS - SPECIFICATION FOR INDOOR SURFACES FOR MULTI-SPORTS USE |
BS EN 14259:2003 | Adhesives for floor covering. Requirements for mechanical and electrical performance |
BS EN 1963:2007 | Textile floor coverings. Tests using the Lisson Tretrad machine |
I.S. EN 14259:2004 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
EN 14259 : 2003 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
S.R. CEN/TS 14472-1:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
DIN EN 1963:2007-07 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TRETRAD MACHINE |
DIN EN 1963:1998-01 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TRETRAD MACHINE |
14/30298231 DC : 0 | BS EN 14159 - TEXTILE FLOOR COVERINGS - REQUIREMENTS FOR TOLERANCES ON (LINEAR) DIMENSIONS OF RUGS, RUNNERS, CARPET TILES AND WALL-TO-WALL CARPET AND FOR TOLERANCES ON PATTERN REPEAT |
I.S. EN 1963:2007 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TETRAD MACHINE |
11/30244187 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
PREN 14159 : DRAFT 2014 | TEXTILE FLOOR COVERINGS - REQUIREMENTS FOR TOLERANCES ON (LINEAR) DIMENSIONS OF RUGS, RUNNERS, CARPET TILES AND WALL-TO-WALL CARPET AND FOR TOLERANCES ON PATTERN REPEAT |
I.S. CEN TS 14159:2005 | TEXTILE FLOOR COVERINGS - REQUIREMENTS FOR TOLERANCES ON (LINEAR) DIMENSIONS OF RUGS, RUNNERS, CARPET TILES AND WALL-TO-WALL CARPET AND FOR TOLERANCES ON PATTERN REPEAT |
S.R. CEN TS 14159:2007 | TEXTILE FLOOR COVERINGS - REQUIREMENTS FOR TOLERANCES ON (LINEAR) DIMENSIONS OF RUGS, RUNNERS, CARPET TILES AND WALL-TO-WALL CARPET AND FOR TOLERANCES ON PATTERN REPEAT |
EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
DIN EN 14259:2004-07 | Adhesives for floor coverings - Requirements for mechanical and electrical performance |
ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
EN ISO 11378-2:2001/A1:2017 | Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017) |
EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
ISO 2551:1981 | Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
ISO 1766:1999 | Textile floor coverings Determination of thickness of pile above the substrate |
ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
EN 985:2001 | Textile floor coverings - Castor chair test |
ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
ISO 3018:1974 | Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions |
ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
EN 984:2001 | Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
EN 995:1995 | Textile floor coverings - Assessment of the creep of the backings |
CEN/TS 14159:2007 | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
CEN/TS 14472-2:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
ISO 2424:2007 | Textile floor coverings Vocabulary |
ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
EN 1471:1996/A1:2003 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
EN 1318:2005/AC:2007 | TEXTILE FLOOR COVERINGS - DETERMINATION OF THE APPARENT EFFECTIVE THICKNESS OF THE BACKING |
EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.