EN 13411-5:2003+A1:2008
Current
Current
The latest, up-to-date edition.
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
Published date
10-22-2008
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
5.1 Materials
5.2 Mechanical properties
6 Verification of safety requirements
6.1 Qualification of personnel
6.2 Type testing
7 Information for use
7.1 Identification marking
7.2 Fitting instructions
7.3 Certificate
Annex A (informative) Specification for construction and sizes
for one design of grip - 1
A.1 General
A.2 Material
A.3 Dimensions
A.4 Fitting instructions
Annex B (informative) Specification for construction and sizes
for one design of grip - 2
B.1 General
B.2 Material
B.3 Dimensions
B.4 Fitting instructions
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and associated EFTA Regulations.Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claimed to comply consistently achieve the required level of quality.
| Committee |
CEN/TC 168
|
| DevelopmentNote |
2003 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (11/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 13411-5 : 2003 + A1 2008 | Identical |
| SANS 53411-5 : 1ED 2015 | Identical |
| BS EN 13411-5 : 2003 | Identical |
| DIN EN 13411-5 E : 2009 | Identical |
| NBN EN 13411-5 : 2003 + A1 2009 | Identical |
| NS EN 13411-5 : 2003 + A1 2008 | Identical |
| I.S. EN 13411-5:2003 | Identical |
| NF EN 13411-5 : 2003 + A1 2008 | Identical |
| PN EN 13411-5 : 2005 + A1 2009 | Identical |
| UNI EN 13411-5 : 2009 | Identical |
| SN EN 13411-5 : 2003 + A1 2009 | Identical |
| UNE-EN 13411-5:2004 | Identical |
| ABNT NBR 11900-4:2020 | Identical |
| UNE-EN 13411-5:2004+A1:2008 | Identical |
| SANS 53411-5:2015(R2021) | Identical |
| BS EN 13411-5:2003+A1:2008 | Identical |
| DIN EN 13411-5:2009-02 | Identical |
| BS EN 16869:2017 | Design/construction of Via Ferratas |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| DIN EN 12927-4:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| EN 12927-1 : 2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
| EN 12927-4 : 2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| 13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| 15/30317830 DC : 0 | BS EN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING BRIDGES ON INLAND WATERS - REQUIREMENTS, TESTS |
| PREN 1176-1 : DRAFT 2014 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 06/30157273 DC : 0 | EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| 15/30321787 DC : 0 | BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA |
| 13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 13411-6 E : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| DIN EN 12927-1:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| DIN EN 1993-1-11:2010-12 | Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components (includes Corrigendum AC:2009) |
| I.S. EN 13411-6:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| 02/709335 DC : DRAFT JULY 2002 | PREN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| I.S. EN 1176-1:2017 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 07/30163564 DC : 0 | BS EN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| UNE-EN 1993-1-11:2015 | Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components |
| PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| I.S. EN 12927-4:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| I.S. EN 12927-1:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
| BS EN 13411-6 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| UNI EN 1993-1-11 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| UNI EN 13411-6 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| Z248-17 | Code for tower cranes |
| 14/30299480 DC : 0 | BS EN 1176-1 - PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| ONORM EN 14504 : 2009 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| EN 16869:2017/AC:2018 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| BS EN 353-1 : 2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| EN 353-1:2014+A1:2017 | Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line |
| BS EN 12927-1:2004 | Safety requirements for cableways installation designed to carry persons. Ropes Selection criteria for ropes and their end fixing |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 1993-1-11:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| I.S. EN 1993-1-11:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 16869:2017 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| I.S. EN 353-1:2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| BS EN 1993-1-11:2006 | Eurocode 3. Design of steel structures Design of structures with tension components |
| BS EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes End fixings |
| DIN EN 13411-6:2009-04 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999) |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| EN 1562:2012 | Founding - Malleable cast irons |
| ISO 5922:2005 | Malleable cast iron |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN ISO 4759-1 : 2000 | TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.