EN 13537:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
04-26-2019
05-30-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements and test methods
5 Test report
6 Labelling
Annex A (normative) - Reference values of thermal
resistance for calibration
Annex B (informative) - Precision of test results
Annex C (informative) - Physiological model for
calculation of range of utility
Annex D (informative) - Warning of misuse of
temperature rating
Annex E (informative) - Rationale
This European Standard specifies the requirements and test methods as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.This European Standard does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies: no prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for these demographics. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not permitted.This European Standard describes the method for the assessment of the performance in steady state conditions of a sleeping bag with regard to the protection against cold.
| CommentClosesDate |
11-30-2012
|
| Committee |
CEN/TC 136
|
| DevelopmentNote |
Supersedes PREN 13537. (06/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 13537 : 2012 | Identical |
| UNE-EN 13537:2012 | Identical |
| UNI EN 13537 : 2012 | Identical |
| NEN EN 13537 : 2012 | Identical |
| NF EN 13537 : 2012 | Identical |
| DIN EN 13537:2012-08 | Identical |
| I.S. EN 13537:2012 | Identical |
| PN EN 13537 : 2012 | Identical |
| NBN EN 13537 : 2012 | Identical |
| BS EN 13537:2012 | Identical |
| NS EN 13537 : 2012 | Identical |
| DIN EN ISO 9920 E : 2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| BS EN ISO 9920:2009 | Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| BS EN 13538-2:2002 | Determination of dimensional characteristics of sleeping bags Thickness and elastic recovery |
| I.S. EN 13538-1:2002 | DETERMINATION OF DIMENSIONAL CHARACTERISTICS OF SLEEPING BAGS - PART 1: INTERNAL DIMENSIONS |
| I.S. EN ISO 9920:2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| ASTM F 2732 : 2016 : REDLINE | Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing |
| UNI EN ISO 9920 : 2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| 04/30125320 DC : DRAFT NOV 2004 | EN ISO 9920 - ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THE THERMAL INSULATION AND EVAPORATIVE RESISTANCE OF A CLOTHING ENSEMBLE |
| DIN EN ISO 9920:2009-10 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| EN ISO 9920:2009 | Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) |
| BS EN 13538-1:2002 | Determination of dimensional characteristics of sleeping bags Internal dimensions |
| EN 13538-2:2002 | Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery |
| EN 13538-1:2002 | DETERMINATION OF DIMENSIONAL CHARACTERISTICS OF SLEEPING BAGS - PART 1: INTERNAL DIMENSIONS |
| EN 12130:1998 | FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME) |
| EN ISO 13937-1:2000/AC:2006 | Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000/Cor.1:2004) |
| ISO 13937-1:2000 | Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
| EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
| ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
| ISO 15831:2004 | Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin |
| EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| EN 13538-3:2016 | Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| EN 29073-1:1992 | Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area |
| EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| EN 12935:2001 | Feather and down - Hygiene and cleanliness requirements |
| EN 15586:2008 | Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test |
| EN ISO 12947-1:1998/AC:2006 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 1: MARTINDALE ABRASION TESTING APPARATUS |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN 12132-1:1998 | Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test |
| ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
| EN 12934:1999 | Feather and down - Composition labelling of processed feathers and down for use as sole filling material |
| EN ISO 139:2005/A1:2011 | Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| ISO 105-C06:2010 | Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| EN ISO 15831:2004 | Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
| EN 13088:2001 | MANUFACTURED ARTICLES FILLED WITH FEATHER AND DOWN - METHOD FOR THE DETERMINATION OF A FILLED PRODUCT'S TOTAL MASS AND OF THE MASS OF THE FILLING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.