• There are no items in your cart

EN 13566-7:2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
Superseded date

02-01-2013

Published date

03-21-2007

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
  3.1 Terms and definitions
  3.2 Symbols and abbreviations
       3.2.1 Symbols
       3.2.2 Abbreviations
4 Pipes at the "M" stage - Requirements for profiled plastics
  strips
  4.1 Materials
  4.2 General characteristics
  4.3 Material characteristics
  4.4 Geometric characteristics
  4.5 Mechanical characteristics
  4.6 Physical characteristics
  4.7 Jointing
  4.8 Marking
5 Fittings at the "M" stage
6 Ancillary components
7 Fitness for purpose of the lining system at the "I" stage
  7.1 Materials
  7.2 General characteristics
  7.3 Material characteristics
  7.4 Geometric characteristics
  7.5 Mechanical characteristics
  7.6 Physical characteristics
  7.7 Additional characteristics
8 Installation practice
  8.1 Preparatory work
  8.2 Storage, handling and transportation of profiled
       plastics strips and fittings
  8.3 Equipment
  8.4 Installation
  8.5 Process-related inspection and testing
  8.6 Lining termination
  8.7 Reconnecting to existing manholes and laterals
  8.8 Final inspection and testing
  8.9 Documentation
Annex A (informative) - Recommended scheme for assessment
        of conformity
      A.1 Scope
      A.2 General
      A.3 Testing and inspection
          A.3.1 Material specification PVC
          A.3.2 Grouping
          A.3.3 Type testing (TT)
          A.3.4 Batch release tests (BRT)
          A.3.5 Process verification testing
          A.3.6 Audit testing tests (AT)
          A.3.7 Indirect testing (IT)
          A.3.8 Inspection and test records
Annex B (normative) - Test method for watertightness of SWO
        pipes whilst subjected to bending
      B.1 Scope
      B.2 Principle
      B.3 Apparatus
      B.4 Test piece
      B.5 Test temperature
      B.6 Test procedure
      B.7 Requirements
      B.8 Test Report
Bibliography

This part of EN 13566, read in conjunction with EN 13566-1, specifies requirements and test methods for pipes that are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip using a winding machine in front of the open end of an existing pipeline (e.g. in a manhole). The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces.It covers spirally-wound pipes of a fixed diameter made of profiled plastics strips of unplasticized poly(vinyl chloride) (PVC U) with an integral locking mechanism. These spirally-wound pipes are used for renovating non-pressure drainage and sewerage networks and are fixed in place by grouting the annular space.NOTEThe grouting procedure is outside the scope of this standard.

Committee
CEN/TC 155
DevelopmentNote
To be read in conjunction with EN 13566-1. (04/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

DIN EN 15885:2011-03 CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
DIN EN 15885:2016-01 (Draft) CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
BS EN 15885:2010 Classification and characteristics of techniques for renovation and repair of drains and sewers
EN 15885:2010 Classification and characteristics of techniques for renovation and repair of drains and sewers
08/30190305 DC : DRAFT DEC 2008 BS EN 15885 - CLASSIFICATION AND PERFORMANCE CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
UNE-EN 15885:2011 Classification and performance characteristics of techniques for renovation and repair of drains and sewers
I.S. EN 15885:2010 CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
DIN EN 15885 E : 2011 CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
UNI EN 15885 : 2011 CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
BS EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General

ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO/TR 11295:1992 Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings
EN 1979:1999 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
EN 13689 : 2002 GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 9967:2016 Thermoplastics pipes Determination of creep ratio
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
EN ISO 179-2:1999/A1:2012 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011)
EN 13566-4:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.