EN 13779:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems
Superseded date
08-01-2017
Published date
04-25-2007
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and units
5 Agreement of design criteria
5.1 General
5.2 Principles
5.3 General building characteristics
5.4 Construction data
5.5 Geometrical description
5.6 Use of the rooms
5.7 Requirements in the rooms
5.8 System requirements
5.9 General requirements for control and monitoring
5.10 General requirements for maintenance and safety
of operation
5.11 Process from project initiation to operation
6 Classification
6.1 Specification of types of air
6.2 Classification of air
6.3 System tasks and basic system types
6.4 Pressure conditions in the room
6.5 Specific fan power
6.6 Heat recovery
7 Indoor environment
7.1 General
7.2 Occupied zone
7.3 Thermal environment
7.4 Indoor air quality
7.5 Indoor air humidity
7.6 Acoustic environment
Annex A (informative) - Guidelines for Good Practice
Annex B (informative) - Economic aspects
Annex C (informative) - Checklist for the design and
use of systems with low
energy consumption
Annex D (informative) - Calculation and application
of Specific Fan Power
Calculating and checking the
SFP, SFP[E], and SFP[V]
Annex E (informative) - Efficiency of ventilation and
air diffusion
Bibliography
This European Standard applies to the design and implementation of ventilation and room conditioning systems for non-residential buildings subject to human occupancy, excluding applications like industrial processes. It focuses on the definitions of the various parameters that are relevant for such systems. The guidance for design given in this standard and its annexes are mainly applicable to mechanical supply and exhaust ventilation systems, and the mechanical part of hybrid ventilation systems.Applications for residential ventilation are not dealt with in this standard. Performance of ventilation systems in residential buildings are dealt with in CEN/TR 14788. The classification uses different categories. For some values, examples are given and, for requirements, typical ranges with default values are presented. The default values given in this standard are not normative as such, and should be used where no other values are specified. Classification should always be appropriate to the type of building and its intended use, and the basis of the classification should be explained if the examples given in the standard are not to be used. NOTEDifferent standards may express the categories for the same parameters in a different way, and also the category symbols may be different.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 13779:2007-09 | Identical |
| GOST R EN 13779 : 2007 | Identical |
| PN EN 13779 : 2008 | Identical |
| UNI EN 13779 : 2008 | Identical |
| NBN EN 13779 : 2007 | Identical |
| BS EN 13779:2007 | Identical |
| NEN EN 13779 : 2007 | Identical |
| NF EN 13779 : 2007 | Identical |
| UNE-EN 13779:2008 | Identical |
| NS EN 13779 : 2ED 2007 | Identical |
| I.S. EN 13779:2007 | Identical |
| SN EN 13779 : 2007 | Identical |
| DIN EN 15726 E : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| 08/30162505 DC : DRAFT APR 2008 | BS EN 15780 - VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| 05/30128645 DC : 0 | EN 15241 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN COMMERCIAL BUILDINGS |
| BS EN ISO 12759:2015 | Fans. Efficiency classification for fans |
| BS EN ISO 16000-26:2012 | Indoor air Sampling strategy for carbon dioxide (CO<sub>2</sub>) |
| I.S. EN 12097:2006 | VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| XP CEN/TS 14175-5 : 2010 XP | FUME CUPBOARDS - PART 5: RECOMMENDATIONS FOR INSTALLATION AND MAINTENANCE |
| 08/30152055 DC : DRAFT APR 2008 | BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 14/30303741 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| CEI UNI EN 50518-1 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| DIN EN 15239:2007-08 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| DIN EN 15239 E : 2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| DIN EN 15243 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| PD CEN/TR 14788:2006 | Ventilation for buildings. Design and dimensioning of residential ventilation systems |
| UNI EN 15780 : 2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| DIN EN 15780 E : 2012 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| 15/30297473 DC : 0 | BS EN 16798-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6 |
| I.S. EN ISO 12759:2015 | FANS - EFFICIENCY CLASSIFICATION FOR FANS (ISO 12759:2010, INCLUDING AMD 1:2013) |
| PREN 16282-1 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| CEN/TR 15232-2:2016 | Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10 |
| UNI CEI EN 50518-1 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. EN ISO 16000-12:2008 | INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) |
| UNE-EN ISO 16000-26:2014 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012) |
| DIN EN 15232:2012-04 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| BS EN 15232:2012 | Energy performance of buildings. Impact of Building Automation, Controls and Building Management |
| CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| CEN/TS 14175-5:2006 | Fume cupboards - Part 5: Recommendations for installation and maintenance |
| VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
| VDI 3814 Blatt 3.1:2017-07 (Draft) | Building automation and control systems (BACS) - BACS functions - Basic functions |
| VDI 6022 Blatt 1.3:2015-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Cleanliness of air-handling surfaces (VDI Ventilation Code of Practice) |
| VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
| VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
| 10/30196986 DC : 0 | BS EN ISO 16000-26 - INDOOR AIR - PART 26: MEASUREMENT STRATEGY FOR CARBON DIOXIDE (CO[2]) |
| BS EN 15243:2007 | Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| BS EN 15241:2007 | Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings |
| I.S. EN 15232:2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| BS EN 15232-1:2017 | Energy Performance of Buildings Impact of Building Automation, Controls and Building Management. Modules M10-4,5,6,7,8,9,10 |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| UNI EN 15423 : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 15242 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| 05/30136885 DC : DRAFT JUL 2005 | EN 15265 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR SPACE HEATING AND COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| DIN EN 15241:2011-06 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| 15/30331528 DC : 0 | BS EN 15232-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - MODULES M10-4, 5, 6, 7, 8, 9, 10 |
| BS ISO 12759 : 2010 | FANS - EFFICIENCY CLASSIFICATION FOR FANS |
| BS EN 15239:2007 | Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems |
| DIN EN 15423 E : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS EN 15240:2007 | Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of air-conditioning systems |
| I.S. EN 15726:2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| UNE-EN 15726:2012 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| UNE-EN ISO 12759:2016 | Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013) |
| EN 16282-1:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| I.S. EN 15243:2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| UNE-EN 50518-1:2014 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| I.S. EN 15251:2007 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| I.S. EN 13053:2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| NF EN 13053 : 2006 + A1 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| DIN EN 15232 E : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| ISO 16000-15:2008 | Indoor air — Part 15: Sampling strategy for nitrogen dioxide (NO2) |
| UNE-EN 15232:2014 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
| DIN EN 13053:2012-02 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| DIN EN ISO 16000-15:2009-04 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| VDI 2036:2009-11 | Building installations for discrict heating |
| VDI 6040 Blatt 1:2011-06 | Air-conditioning - Schools - Requirements (VDI Ventilation Code of Practice, VDI Code of Practice for School Buildings) |
| VDI 4700 Blatt 3:2015-05 | Terminology of civil engineering and building services - Symbols (building services) |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| VDI 4302 Blatt 1:2015-04 | Sensory testing of indoor air and determination of odour emissions from building products - Fundamentals |
| VDI 6014:2016-12 | Energy conservation by application of variable speed drives (VSD) in building services |
| VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
| VDI 4300 Blatt 9:2005-08 | Measurement of indoor air pollution - Measurement strategy for carbon dioxide (CO) |
| VDI 4703:2015-05 | Facility Management - Life-cycle-cost-based tender |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| VDI 3811:2016-07 | Refurbishment of heating installations |
| VDI 6022 Blatt 4:2012-08 | Ventilation and indoor-air quality - Qualification of personnel for hygiene checkings, hygiene inspections, and assessment of indoor-air quality |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 6034:2017-08 | Cooling surfaces for rooms - Planning, installation and operation |
| VDI 3810 Blatt 4:2013-12 | Operating and maintenance of buildings and building installations - Ventilating and air-conditioning installations |
| VDI 6032 Blatt 1:2015-05 | Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| VDI 3807 Blatt 4:2008-08 | Characteristic values of energy and water consumption of buildings - Characteristic values for electrical energy |
| VDI 3814 Blatt 7:2012-05 | Building automation and control systems (BACS) - Design of user interfaces |
| VDI 2262 Blatt 4:2006-03 | Workplace air - Reduction of exposure to air pollutants - Capture of air pollutants |
| VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
| VDI 2089 Blatt 2:2009-08 | Building services in swimming baths - Efficient use of energy and water |
| VDI 6022 Blatt 7.1:2013-10 | Ventilation and indoor-air quality - Branch-specific guides - Waste treatment plants |
| VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| VDI 2083 Blatt 9.1:2006-12 | Clean room technology - Compatibility with required cleanliness and surface cleanliness |
| VDI 6000 Blatt 3:2011-06 | Provision and installation of sanitary facilities - Public buildings and -areas |
| VDI 2083 Blatt 4.2:2011-04 | Cleanroom technology - Energy efficiency |
| VDI/VDE 2627 Blatt 1:2015-12 | Measuring rooms - Classification and characteristics - Planning and execution |
| VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
| VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
| VDI 4302 Blatt 2:2012-05 (Draft) | Sensory testing of indoor air and determination of odour emissions from building products - Strategy for sensory testing of indoor air |
| VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
| VDI 6000 Blatt 2:2007-11 | Provision and installation of sanitary facilities - Workplaces and work stations |
| DIN EN 15240 E : 2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF AIR-CONDITIONING SYSTEMS |
| UNI EN ISO 16000-15 : 2008 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| BS EN 50518-1:2013 | Monitoring and alarm receiving centre Location and construction requirements |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| 11/30244192 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| 14/30303762 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| I.S. EN 15459:2007 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| 05/30134365 DC : DRAFT MAY 2005 | EN 15243 - VENTILATION FOR BUILDINGS - CALCULATION FOR ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| BS EN 15423:2008 | Ventilation for buildings. Fire precaution for air distribution systems in buildings |
| PD CEN/TR 15232-2:2016 | Energy performance of buildings Accompanying TR prEN 15232-1:2015. Modules M10-4,5,6,7,8,9,10 |
| I.S. EN 13129:2016 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR MAIN LINE ROLLING STOCK - COMFORT PARAMETERS AND TYPE TESTS |
| DIN EN 15251 E : 2012 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| 10/30197665 DC : 0 | BS ISO 16000-28 - INDOOR AIR - PART 28: DETERMINATION OF ODOUR EMISSIONS FROM BUILDING PRODUCTS USING TEST CHAMBERS |
| S.R. CEN/TR 15232-2:2016 | ENERGY PERFORMANCE OF BUILDINGS - PART 2: ACCOMPANYING TR PREN 15232-1:2015 - MODULES M10-4,5,6,7,8,9,10 |
| BS EN ISO 16000-15:2008 | Indoor air Sampling strategy for nitrogen dioxide (NO2) |
| DIN EN 15240:2007-08 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF AIR-CONDITIONING SYSTEMS |
| 07/30167162 DC : 0 | BS EN 15726 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIRCONDITIONED/ VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| DIN EN 15243:2007-10 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| I.S. EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. EN 16282-1:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| UNE-EN 15780:2012 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| I.S. EN 15780:2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| I.S. EN 15241:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| EN 15232-1:2017 | Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10 |
| I.S. EN 15240:2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF AIR-CONDITIONING SYSTEMS |
| DIN EN 15459 E : 2008 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| BS EN 13053 : 2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| EN ISO 16000-15:2008 | Indoor air - Part 15: Sampling strategy for nitrogen dioxide (NO2) (ISO 16000-15:2008) |
| EN ISO 16000-26:2012 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012) |
| UNI EN 15459 : 2008 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 15232 : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| UNI EN ISO 16000-26 : 2012 | INDOOR AIR - PART 26: SAMPLING STRATEGY FOR CARBON DIOXIDE (CO[2]) |
| DIN EN 15726:2011-12 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions; German version EN 15726:2011 |
| BS EN 15780:2011 | Ventilation for buildings. Ductwork. Cleanliness of ventilation systems |
| BS EN 15726:2011 | Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| BS ISO 16000-28:2012 | Indoor air Determination of odour emissions from building products using test chambers |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| UNI EN 15242 : 2008 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| BS EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN EN 15242:2007-09 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| UNE-EN 15217:2012 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings |
| 15/30316978 DC : 0 | BS EN 16798-5-2 - ENERGY PERFORMANCE OF BUILDINGS - MODULES M5-6, M5-8 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS - PART 5-2: DISTRIBUTION AND GENERATION (REVISION OF EN 15241) - METHOD 2 |
| UNI EN ISO 16000-12 : 2008 | INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) |
| BS EN ISO 16000-12:2008 | Indoor air Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
| 05/30128648 DC : 0 | EN 15240 - VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF AIRCONDITIONING SYSTEMS |
| BS EN 16282-1:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens General requirements including calculation method |
| NF EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| I.S. EN ISO 16000-26:2012 | INDOOR AIR - PART 26: SAMPLING STRATEGY FOR CARBON DIOXIDE (CO[2]) (ISO 16000-26:2012) |
| UNE-EN ISO 9806:2014 | Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013) |
| I.S. EN 15232-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - PART 1: IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - MODULES M10-4, 5, 6, 7, 8, 9, 10 |
| I.S. EN 15239:2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| PREN 16282-8 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| ISO 16000-28:2012 | Indoor air Part 28: Determination of odour emissions from building products using test chambers |
| I.S. EN ISO 16000-15:2008 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS ISO 16814:2008 | Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy |
| ISO 16000-12:2008 | Indoor air Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) |
| ISO 16000-26:2012 | Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2) |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| ISO 16814:2008 | Building environment design Indoor air quality Methods of expressing the quality of indoor air for human occupancy |
| BS EN 15217:2007 | Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings |
| UNI EN 13053 : 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| ISO 12759:2010 | Fans Efficiency classification for fans |
| 05/30128995 DC : 0 | PREN 15251 - CRITERIA FOR THE INDOOR ENVIRONMENT INCULDING THERMAL, INDOOR AIR QUALITY, LIGHT AND NOISE |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| EN 15726:2011 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| EN ISO 16000-12:2008 | Indoor air - Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) (ISO 16000-12:2008) |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| EN 15459:2007 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| EN 15217:2007 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings |
| EN 15780:2011 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| EN ISO 12759:2015 | Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013) |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 15232:2012 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| DIN EN ISO 12759:2015-12 | Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013) |
| 11/30244232 DC : DRAFT JUNE 2011 | BS EN 15232 - ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| 16/30332593 DC : 0 | BS EN 15759-2 - CONSERVATION OF CULTURAL HERITAGE - INDOOR CLIMATE - PART 2: VENTILATION TO PROTECT HERITAGE BUILDINGS AND COLLECTIONS |
| DIN EN 15241 E : 2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN ISO 16000-26:2012-11 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO<(Index)2>) (ISO 16000-26:2012); German version EN ISO 16000-26:2012 |
| DIN EN ISO 12759 E : 2015 | FANS - EFFICIENCY CLASSIFICATION FOR FANS (ISO 12759:2010, INCLUDING AMD 1:2013) |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| DIN EN 15423:2008-09 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 15780:2012-01 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| DD CEN/TS 14175-5:2006 | Fume cupboards Recommendations for installation and maintenance |
| DIN EN ISO 16000-12:2008-08 | INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) |
| 12/30237838 DC : 0 | BS ISO 16343 - ENERGY PERFORMANCE OF BUILDINGS - METHODS FOR EXPRESSING ENERGY PERFORMANCE AND FOR ENERGY CERTIFICATION OF BUILDINGS |
| 05/30093040 DC : DRAFT NOV 2005 | ISO 16814 - BUILDING ENVIRONMENT DESIGN - INDOOR AIR QUALITY - METHODS OF EXPRESSING THE QUALITY OF INDOOR AIR FOR HUMAN OCCUPANCY |
| 11/30244213 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING |
| 05/30128642 DC : 0 | PREN 15242 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| 09/30187320 DC : 0 | BS ISO 12759 - FANS - EFFICIENCY CLASSIFICATION FOR FANS |
| I.S. EN 15242:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| I.S. CEN TR 14788:2006 | VENTILATION FOR BUILDINGS - DESIGN AND DIMENSIONING OF RESIDENTIAL VENTILATION SYSTEMS |
| I.S. EN 15423:2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| ISO 23045:2008 | Building environment design Guidelines to assess energy efficiency of new buildings |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| I.S. CEN/TS 14175-5:2006 | FUME CUPBOARDS - PART 5: RECOMMENDATIONS FOR INSTALLATION AND MAINTENANCE |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| UNE-EN 13053:2007 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| BS EN 15459:2007 | Energy performance of buildings. Economic evaluation procedure for energy systems in buildings |
| BS EN 12097:2006 | Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| DIN EN 15459:2008-06 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| DIN EN 12097:2006-11 | Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 15193:2007/AC:2010 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| ISO 9972:2015 | Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| PREN 15232 : DRAFT 2011 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| CR 1752:1998 | Ventilation for buildings - Design criteria for the indoor environment |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| EN 13829:2000 | Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified) |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.