EN 13848-5:2017
Current
Current
The latest, up-to-date edition.
Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line, switches and crossings
Published date
08-23-2017
Publisher
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 General Considerations
6 Assessment of track geometry quality
7 Immediate action limits
8 Alert and intervention limit
Annex A (informative) - Relative importance of
the various parameters
Annex B (informative) - Alert and intervention limits
Annex C (normative) - Twist limits for nominal track
gauge of 1668 mm
Annex D (informative) - A-Deviations
Annex ZA (informative) - Relationship between
this European Standard and the essential
requirements of EU Directive 2008/57/EC
Bibliography
This European Standard defines the minimum requirements for the quality levels of track geometry, and specifies the safety related limits for each parameter as defined in EN 13848-1 and measured by any track geometry measurement system as defined in EN 13848-2, EN 13848-3 and EN 13848-4.This European Standard covers the following topics:-immediate action limits (IAL);-recommendations on tolerance levels for isolated defects;-relative importance of parameters with respect to the vehicle behaviours.The necessity to measure, the frequency of measurements and the selection of measured parameters are not covered by this European Standard.This European Standard applies to high-speed and conventional lines, including switches and crossings, of 1 435 mm and wider gauge railways provided that the vehicles operated on those lines comply with EN 14363 and other vehicle safety standards.This European Standard does not apply to Urban Rail Systems.
| DevelopmentNote |
Supersedes PREN 13848-5. (08/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 13848-5:2017-10 | Identical |
| UNE-EN 13848-5:2009 | Identical |
| UNI EN 13848-5:2017 | Identical |
| SN EN 13848-5 : 2017 | Identical |
| NBN EN 13848-5 : 2008 + A1 2010 | Identical |
| NS EN 13848-5 : 2017 | Identical |
| PN EN 13848-5 : 2017 | Identical |
| BS EN 13848-5:2017 | Identical |
| I.S. EN 13848-5:2017 | Identical |
| NEN EN 13848-5 : 2017 | Identical |
| NF EN 13848-5 : 2017 | Identical |
| UNI EN 13848-5 : 2010 | Identical |
| DIN EN 13848-5:2015-02 (Draft) | Identical |
| UNE-EN 13848-5:2018 | Identical |
| DIN EN 13803 E : 2017 | RAILWAY APPLICATIONS - TRACK - TRACK ALIGNMENT DESIGN PARAMETERS - TRACK GAUGES 1435 MM AND WIDER |
| BS EN 16432-1:2017 | Railway applications. Ballastless track systems General requirements |
| I.S. EN 13848-4:2011 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 4: MEASURING SYSTEMS - MANUAL AND LIGHTWEIGHT DEVICES |
| BS EN 13848-4:2011 | Railway applications. Track. Track geometry quality Measuring systems. Manual and lightweight devices |
| S.R. CEN/TR 16513:2014 | RAILWAY APPLICATIONS - TRACK - SURVEY OF TRACK GEOMETRY QUALITY |
| NF EN 13848-4 : 2012 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 4: MEASURING SYSTEMS - MANUAL AND LIGHTWEIGHT DEVICES |
| BS EN 14363:2005 | Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests |
| DIN EN 13231-1 E : 2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 1: WORKS ON BALLASTED TRACK - PLAIN LINE, SWITCHES AND CROSSINGS |
| EN 13803 : 2017 | Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider |
| DIN EN 13803:2017-09 | RAILWAY APPLICATIONS - TRACK - TRACK ALIGNMENT DESIGN PARAMETERS - TRACK GAUGES 1435 MM AND WIDER |
| PD CEN/TR 16978:2016 | Railway applications. Infrastructure. Survey on isolated defects |
| 17/30331222 DC : 0 | BS EN 16432-1 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENT |
| 13/30251582 DC : 0 | BS EN 50617-2 - RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 2: AXLE COUNTERS |
| I.S. EN 13803:2017 | RAILWAY APPLICATIONS - TRACK - TRACK ALIGNMENT DESIGN PARAMETERS - TRACK GAUGES 1435 MM AND WIDER |
| S.R. CEN/TR 16978:2016 | RAILWAY APPLICATIONS - INFRASTRUCTURE - SURVEY ON ISOLATED DEFECTS |
| DIN EN 13848-6:2014-07 | Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality |
| 11/30241377 DC : 0 | BS EN 13231-1 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 1: WORKS ON BALLASTED TRACK - PLAIN LINE, SWITCHES AND CROSSINGS |
| DIN EN 14969 E : 2006 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
| BS EN 13231-1:2013 | Railway applications. Track. Acceptance of works Works on ballasted track. Plain line, switches and crossings |
| BS EN 14969:2006 | Railway applications. Track. Qualification system for railway trackwork contractors |
| EN 13848-6:2014 | Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality |
| I.S. EN 13231-1:2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 1: WORKS ON BALLASTED TRACK - PLAIN LINE, SWITCHES AND CROSSINGS |
| UNI EN 13848-6 : 2014 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 6: CHARACTERISATION OF TRACK GEOMETRY QUALITY |
| DIN EN 16432-1:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEN/TR 16978:2016 | Railway applications - Infrastructure - Survey on isolated defects |
| UNI EN 13848-4 : 2012 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 4: MEASURING SYSTEMS - MANUAL AND LIGHTWEIGHT DEVICES |
| DIN EN 13848-4:2012-03 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 4: MEASURING SYSTEMS - MANUAL AND LIGHTWEIGHT DEVICES |
| DIN EN 13848-6 E : 2014 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 6: CHARACTERISATION OF TRACK GEOMETRY QUALITY |
| PD CEN/TR 16513:2014 | Railway applications. Track. Survey of track geometry quality |
| UNE-EN 14363:2017 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| DIN EN 16432-1 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| PREN 14363 : DRAFT 2013 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| UNI EN 13231-1 : 2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 1: WORKS ON BALLASTED TRACK - PLAIN LINE,SWITCHES AND CROSSINGS |
| BS EN 50617-2:2015 | Railway Applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Axle counters |
| I.S. EN 14969:2006 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
| BS EN 13803:2017 | Railway applications. Track. Track alignment design parameters. Track gauges 1 435 mm and wider |
| I.S. EN 15654-1:2018 | RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE |
| I.S. EN 50617-2:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS |
| PREN 13231-1 : DRAFT 2011 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 1: WORKS ON BALLASTED TRACK - PLAIN LINE, SWITCHES AND CROSSINGS |
| DIN EN 13803:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - TRACK ALIGNMENT DESIGN PARAMETERS - TRACK GAUGES 1435 MM AND WIDER |
| EN 13848-4:2011 | Railway applications - Track - Track geometry quality - Part 4: Measuring systems - Manual and lightweight devices |
| EN 16432-1:2017 | Railway applications - Ballastless track systems - Part 1: General requirements |
| EN 14969:2006 | Railway applications - Track - Qualification system for railway trackwork contractors |
| BS EN 13848-6:2014 | Railway applications. Track. Track geometry quality Characterisation of track geometry quality |
| 14/30279795 DC : 0 | BS EN 13803 - RAILWAY APPLICATIONS - TRACK - TRACK ALIGNMENT DESIGN PARAMETERS - TRACK GAUGES 1435 MM AND WIDER |
| 13/30250658 DC : 0 | BS EN 14363 - RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| PREN 50617-2 : DRAFT 2013 | RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 2: AXLE COUNTERS |
| I.S. EN 14363:2016 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| I.S. EN 16432-1:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13848-6:2014 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 6: CHARACTERISATION OF TRACK GEOMETRY QUALITY |
| EN 15654-1:2018 | Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service |
| CEN/TR 16513:2014 | Railway applications - Track - Survey of track geometry quality |
| DIN EN 16432-1:2017-09 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13231-1:2013-07 | Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings |
| DIN EN 14969:2006-11 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
| EN 13231-1:2013 | Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| EN 50617-2:2015/AC:2016 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS |
| EN 13231-1:2013 | Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| EN 13848-2:2006 | RAILWAY APPLICATIONS - TRACK - TRACK GEOMETRY QUALITY - PART 2: MEASURING SYSTEMS - TRACK RECORDING VEHICLES |
| EN 13848-1:2003+A1:2008 | Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry |
| EN 13848-4:2011 | Railway applications - Track - Track geometry quality - Part 4: Measuring systems - Manual and lightweight devices |
| CEN/TR 16978:2016 | Railway applications - Infrastructure - Survey on isolated defects |
| EN 13803 : 2017 | Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider |
| EN 13848-6:2014 | Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality |
| EN 13848-3:2009 | Railway applications - Track - Track geometry quality - Part 3: Measuring systems - Track construction and maintenance machines |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.