EN 14576:2005
Current
Current
The latest, up-to-date edition.
Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
Published date
04-13-2005
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 General requirements and procedure
4.1 Apparatus
4.1.1 Blanking die
4.1.2 Notching device
4.1.3 Stress cracking apparatus
4.1.4 Compression moulding press
4.1.5 Compression moulding die
4.2 Test temperatures
4.3 Reagent
4.4 Test duration
4.5 Compression moulding procedure
4.6 Specimens
4.7 Test procedure
5 Test report
Annex A (informative) Potential supply sources for the equipment
Bibliography
This document specifies a test method for screening the resistance of polymeric geosynthetic barriers to stress cracking. The test is applicable to polypropylene and polyethylene based products and to all other polymeric geosynthetic barriers which have a partially crystalline structure.NOTEThe described method is suitable for conformance testing of smooth surfaced (non-textured) geosynthetic barriers. However the resistance to stress cracking of the resin used in the manufacture of structured surface materials can be evaluated by carrying out the test on a plaque formed from the relevant resin (see 4.5) or, where structuring is carried out as a separate processing step, on a preformed smooth surface geosynthetic barrier, the test can be performed on the intermediate smooth material.The data are suitable for screening and determination of conformity but not for deriving performance data such as lifetime, unless supported by further evidence.
| Committee |
CEN/TC 189
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 14576 : 2005 | Identical |
| NEN EN 14576 : 2005 | Identical |
| NS EN 14576 : 1ED 2005 | Identical |
| I.S. EN 14576:2005 | Identical |
| PN EN 14576 : 2007 | Identical |
| SN EN 14576 : 2005 | Identical |
| SN 670768 : 2005 | Identical |
| UNI EN 14576 : 2005 | Identical |
| UNE-EN 14576:2006 | Identical |
| BS EN 14576:2005 | Identical |
| NF EN 14576 : 2005 | Identical |
| DIN EN 14576 E : 2005 | Identical |
| DIN EN 14576:2005-07 | Identical |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| 12/30267857 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 12/30267848 DC : 0 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| BS EN 13493:2013 | Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites |
| UNE-EN 15382:2013 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| UNE-EN 13492:2013 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| BS EN 15382:2013 | Geosynthetic barriers. Characteristics required for use in transportation infrastructure |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| BS EN 13492:2013 | Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| DIN EN 13492:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| DIN EN 15382:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 12/30267845 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DD ISO/TS 13434:2008 | Geosynthetics. Guidelines for the assessment of durability |
| DIN EN 15382 E : 2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| BS EN 16994:2018 | Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| DIN EN 13361:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DIN EN 13491:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 15382:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| DIN EN 13492:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| UNE-EN 13493:2013 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 13361:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DIN EN 13493:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| DIN EN 13361:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| UNE-EN 13361:2013 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 13362:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| 12/30267854 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN CONSTRUCTION AND TUNNELS AND ASSOCIATED UNDER GROUND STRUCTURES |
| 12/30268279 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| UNE-EN 13491:2013 | Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures |
| I.S. EN 16994:2018 | CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| EN 16994:2018 | Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| UNE-EN 13362:2013 | Geosynthetic barriers - Characteristics required for use in the construction of canals |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| EN 13361:2018 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| 16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| 12/30267851 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
| EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
| ISO/TS 13434:2008 | Geosynthetics Guidelines for the assessment of durability |
| DIN EN 13362:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| DIN EN 13493:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| EN ISO 527-3:1995/AC:2002 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
| EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.