• There are no items in your cart

EN 1474-3:2008

Current
Current

The latest, up-to-date edition.

Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems
Published date

12-03-2008

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Definition and ability of the LNG transfer systems
   4.1 System requirement
   4.2 Overall safety philosophy
   4.3 Overall functional targets and requirements
   4.4 Design principles and risk assessment methodology
   4.5 Design principles
   4.6 Risk assessment
        4.6.1 Hazard identification
        4.6.2 Risk analysis
        4.6.3 Risk assessment
        4.6.4 Acceptance criteria
   4.7 Safety-critical elements
   4.8 Performance standards
   4.9 Risk reduction
5 New design qualification
   5.1 Design qualification
   5.2 Technology assessment
   5.3 Risk assessment: failure mode identification
   5.4 Analysis and testing
   5.5 Reliability analysis
   5.6 Compliance statements
6 Design basis and criteria of a LNG transfer system
   6.1 General
   6.2 Supporting structures and equipment
   6.3 Transfer line diameter and product data
   6.4 Dimensions and clearances
   6.5 Stress analysis
   6.6 Dynamic behaviour (cyclic motions amplitude, speed
        and fatigue)
   6.7 Special loads situations
   6.8 Product swivel joints and structural bearings
   6.9 Connecting/disconnecting device
   6.10 Handling for connection, disconnection, storing
   6.11 Communications, evacuation and rescue
   6.12 Others
7 Safety precautions
   7.1 Introduction
   7.2 Communication
   7.3 Approach and control monitoring berthing and
        connection process
   7.4 Position monitoring, alarm and shut down system
        for the LNG transfer systems
   7.5 ERS system
   7.6 Safety interfaces
   7.7 Control of fluid transfer
8 Connection with the LNGC
   8.1 Two main categories of LNG transfer systems are
        anticipated:
   8.2 Additional requirements for the ship shall address:
   8.3 In order maximise the level of standardisation the
        following guidance shall be observed:
   8.4 Systems and equipment for the position control of the
        LNG carrier during berthing, connection and transfer:
9 Operating and control design
10 Inspection and tests
11 Quality assurance and control
12 Documentation
Annex A (normative) - Procedure for deviation from the full
        standard
Bibliography

This European Standard gives general guidelines for the design of liquefied natural gas (LNG) transfer systems intended for use on offshore transfer facilities or on coastal weather exposed transfer facilities. The transfer facilities considered may be between floating units, or between floating and fixed units. The specific component details of the LNG transfer systems are not covered by this European Standard.Reference is made to EN 1474-1 and EN 1474-2 where appropriate.As a general statement the present standard applies to all transfer systems given in the scope. However, some transfer system designs may require a deviation from the full standard as described in normative Annex A.

Committee
CEN/TC 282
DevelopmentNote
Supersedes EN 1474. (01/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
PN EN 1474-3 : 2010 Identical
NF EN 1474-3 : 2009 Identical
NS EN 1474-3 : 1ED 2008 Identical
UNI EN 1474-3 : 2009 Identical
BS EN 1474-3:2008 Identical
NBN EN 1474-3 : 2009 Identical
I.S. EN 1474-3:2008 Identical
SN EN 1474-3 : 2009 Identical
NEN EN 1474-3 : 2009 Identical
DIN EN 1474-3:2009-02 Identical
UNE-EN 1474-3:2009 Identical

BS EN ISO 20519:2017 Ships and marine technology. Specification for bunkering of liquefied natural gas fuelled vessels
DIN EN 1474-2:2009-02 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
ONORM EN 1474-2 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES
DIN EN ISO 20519 E : 2017 SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
06/30158810 DC : 0 BS EN 1474-2 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 1474-2:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES
16/30321970 DC : 0 BS EN ISO 20519 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF GAS FUELLED SHIPS
BS EN 1474-2:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
UNI EN 1474-2 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES
EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
PD ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
UNE-EN ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)
I.S. EN ISO 20519:2017 SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
ISO 20519:2017 Ships and marine technology Specification for bunkering of liquefied natural gas fuelled vessels
EN ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)
ISO/TR 17177:2015 Petroleum and natural gas industries Guidelines for the marine interfaces of hybrid LNG terminals
DIN EN ISO 20519:2016-05 (Draft) SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
DIN EN ISO 20519:2017-06 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)

EN 61511-2:2017 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1
API 2A WSD : 2014 PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
EN 61511-3:2017 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 19904-1:2006 Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)
IEC 61511-2:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
EN 1160 : 1996 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
ISO 9001:2015 Quality management systems — Requirements
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
EN 1532 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
API 2A LRFD : 1993 RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
BV NI518 : R00 CLASSIFICATION & CERTIFICATION OF OFFSHORE LNG TERMINALS
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.