EN 14774-2:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
Superseded date
09-01-2015
Published date
11-11-2009
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sample preparation
7 Procedure
8 Calculation
9 Precision
10 Test report
Bibliography
This European Standard describes the method of determining the total moisture content of a sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this document is applicable to all solid biofuels.The total moisture content of biofuels is not an absolute value and conditions for its determination have to be standardised to enable comparative determinations to be made. NOTEThe term moisture content, when used with biomass materials, can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which may evaporate when determining moisture content by oven drying.
| Committee |
CEN/TC 335
|
| DevelopmentNote |
Supersedes CEN/TS 14774-2. (11/2009) Supersedes PREN 14774-2. (11/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 14774-2 : 2009 | Identical |
| SN EN 14774-2 : 2010 | Identical |
| UNI EN 14774-2 : 2010 | Identical |
| BS EN 14774-2:2009 | Identical |
| I.S. EN 14774-2:2009 | Identical |
| NF EN 14774-2 : 2010 | Identical |
| UNE-EN 14774-2:2010 | Identical |
| PN EN 14774-2 : 2010 | Identical |
| NBN EN 14774-2 : 2010 | Identical |
| NS EN 14774-2 : 2009 | Identical |
| DIN EN 14774-2:2010-04 | Identical |
| BS EN 15234-5:2012 | Solid biofuels. Fuel quality assurance Firewood for non-industrial use |
| DIN EN 14961-1:2010-04 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14961-3:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNE-EN 14961-1:2011 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| UNE-EN 14961-4:2012 | Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use |
| UNE-EN 14918:2011 | Solid biofuels - Determination of calorific value |
| 10/30212565 DC : 0 | BS EN 14780 - SOLID BIOFUELS - SAMPLE PREPARATION |
| 11/30244615 DC : 0 | BS EN 15234-6 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 10/30219000 DC : 0 | BS EN 14961-3 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| NF EN 15103 : 2010 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY |
| PREN 15234-2 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNE-EN 14961-5:2011 | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
| BS EN 14961-2:2011 | Solid biofuels. Fuel specifications and classes Wood pellets for non-industrial use |
| BS EN 14961-1:2010 | Solid biofuels. Fuel specifications and classes General requirements |
| I.S. EN 15149-1:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| I.S. EN 14780:2011 | SOLID BIOFUELS - SAMPLE PREPARATION |
| DIN EN 15234-4:2012-04 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| NF EN 14961-3 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| BS EN 15210-2:2010 | Solid biofuels. Determination of mechanical durability of pellets and briquettes Briquettes |
| BS EN 15234-6:2012 | Solid biofuels. Fuel quality assurance Non-woody pellets for non-industrial use |
| 11/30239011 DC : 0 | BS EN 15150 - SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| BS EN 15150:2011 | Solid biofuels. Determination of particle density |
| BS EN 15210-1:2009 | Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets |
| BS EN 16126:2012 | Solid biofuels. Determination of particle size distribution of disintegrated pellets |
| UNI EN 14961-4 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| S.R. CEN/TR 15149-3:2014 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: ROTARY SCREEN METHOD |
| UNE-EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| NF EN 14961-2 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15234-2:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15149-2 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| NF EN 15210-2 : 2011 | SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES |
| EN 15149-1:2010 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| EN 15210-1:2009 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| EN 14961-5:2011 | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
| EN 14961-1:2010 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| EN 15149-2:2010 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| EN 14780:2011 | Solid biofuels - Sample preparation |
| EN 15210-2:2010 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes |
| EN 14961-3:2011 | Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use |
| CEN/TR 15149-3:2014 | Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method |
| EN 14961-2:2011 | Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use |
| EN 14961-4:2011 | Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use |
| DIN EN 15210-1:2010-04 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| UNE-EN 15103:2010 | Solid biofuels - Determination of bulk density |
| UNI CEN/TS 15414-2 : 2010 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 2: DETERMINATION OF TOTAL MOISTURE CONTENT BY A SIMPLIFIED METHOD |
| DIN EN 15234-6:2012-04 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| 11/30244612 DC : 0 | BS EN 15234-5 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| DIN EN 15234-2:2012-04 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| DIN EN 15234-5:2012-04 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| DIN EN 15150:2012-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| 11/30244602 DC : 0 | BS EN 15234-2 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| DIN EN 14961-6:2012-04 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| DIN EN 15103:2010-04 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY |
| I.S. EN 15234-5:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| PREN 14961-3 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNI EN 15234-4 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-5:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNI EN 14961-6 : 2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15150:2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| BS EN 14780:2011 | Solid biofuels. Sample preparation |
| PREN 15234-4 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| DIN EN 14780:2011-09 | SOLID BIOFUELS - SAMPLE PREPARATION |
| PD CEN/TR 15149-3:2014 | Solid biofuels. Determination of particle size distribution Rotary screen method |
| DIN EN 16126:2012-05 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS |
| 11/30244599 DC : 0 | BS EN 14961-6 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON WOODY PELLETS FOR NON-INDUSTRIAL USE |
| UNE-EN 15234-2:2012 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| BS EN 14961-6:2012 | Solid biofuels. Fuel specifications and classes Non-woody pellets for non-industrial use |
| NF EN 14961-5 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| NF EN 14961-6 : 2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 10/30219095 DC : 0 | BS EN 15149-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: HORIZONTAL SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| BS EN 14918:2009 | Solid biofuels. Determination of calorific value |
| I.S. EN 15234-3:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| BS EN 15149-1:2010 | Solid biofuels. Determination of particle size distribution Oscillating screen method using sieve apertures of 1 mm and above |
| UNE-EN 14961-2:2012 | Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use |
| DIN EN 14961-2:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| BS EN 14961-3:2011 | Solid biofuels. Fuel specifications and classes Wood briquettes for non-industrial use |
| I.S. EN 15210-2:2010 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES |
| 13/30277482 DC : 0 | BS EN ISO 16993 - SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| NF EN 14961-4 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| NF EN 15210-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| I.S. EN 14961-3:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNI EN 16126 : 2012 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS |
| UNI EN 15149-1 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| DIN EN 15149-2:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| BS EN 15234-4:2012 | Solid biofuels. Fuel quality assurance Wood chips for non-industrial use |
| 10/30219003 DC : 0 | BS EN 14961-4 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| DIN EN 14961-5:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| 10/30216724 DC : 0 | BS EN 15210-2 - SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES |
| BS EN 15234-2:2012 | Solid biofuels. Fuel quality assurance Wood pellets for non-industrial use |
| UNI EN 15210-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| UNI EN 14918 : 2010 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| 15/30275872 DC : 0 | BS EN ISO 17827-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW |
| BS EN 15234-3:2012 | Solid biofuels. Fuel quality assurance Wood briquettes for non-industrial use |
| 10/30218997 DC : 0 | BS EN 14961-2 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| BS EN 15103:2009 | Solid biofuels. Determination of bulk density |
| I.S. EN 15103:2009 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY |
| I.S. EN 16126:2012 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS |
| UNI EN 15234-5 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNI EN 15210-2 : 2011 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - BRIQUETTES |
| UNI EN 15234-6 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15234-3 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| DIN EN 14961-4:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| UNE-EN 15149-1:2011 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| UNI EN 15234-2 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNE-EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| I.S. EN 14961-4:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-6:2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 14961-3 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-2:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| S.R. CEN TS 15414-2:2010 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 2: DETERMINATION OF TOTAL MOISTURE CONTENT BY A SIMPLIFIED METHOD |
| EN 15234-2:2012 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| EN 15234-3:2012 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| EN 16126:2012 | Solid biofuels - Determination of particle size distribution of disintegrated pellets |
| EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| EN 15234-6:2012 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| BS EN 15149-2:2010 | Solid biofuels. Determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below |
| UNE-EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| I.S. EN 15149-2:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| DIN EN 15234-3:2012-04 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| UNE-EN 16126:2012 | Solid biofuels - Determination of particle size distribution of disintegrated pellets |
| PREN 15234-6 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 11/30244609 DC : 0 | BS EN 15234-4 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| DIN EN 15210-2:2011-01 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES |
| 10/30219097 DC : 0 | BS EN 15149-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| UNI EN 15103 : 2010 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY |
| UNE-EN 15210-2:2011 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes |
| 10/30219006 DC : 0 | BS EN 14961-5 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNE-EN 14780:2012 | Solid biofuels - Sample preparation |
| I.S. EN 14918:2009 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| DIN EN 15149-1:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| DIN EN 15103 E : 2010 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY |
| BS EN 14961-4:2011 | Solid biofuels. Fuel specifications and classes Wood chips for non-industrial use |
| UNE-EN 14961-3:2012 | Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use |
| I.S. EN 15234-4:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| PREN 14961-2 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 14780 : 2011 | SOLID BIOFUELS - SAMPLE PREPARATION |
| NF EN 15149-2 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| UNI EN 14961-5 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| PREN 15234-5 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| BS EN 14961-5:2011 | Solid biofuels. Fuel specifications and classes Firewood for non-industrial use |
| DD CEN/TS 15414-2:2010 | Solid recovered fuels. Determination of moisture content using the oven dry method Determination of total moisture content by a simplified method |
| I.S. EN 14961-1:2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 15149-2:2011 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| UNE-EN 15210-1:2010 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| UNI EN 14961-2 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15150 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| UNE-EN 15150:2012 | Solid biofuels - Determination of particle density |
| UNE-EN 15234-6:2012 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| I.S. EN 15234-6:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15210-1:2009 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| UNE-EN 15234-3:2012 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| UNI EN 14961-1 : 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| NF EN 15149-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| NF EN 14961-1 : 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| NF EN 15150 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| EN 15150:2011 | Solid biofuels - Determination of particle density |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| CEN/TS 15414-2:2010 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method |
| EN 15103:2009 | Solid biofuels - Determination of bulk density |
| DIN EN 14918:2014-08 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| CEN/TS 14588:2003 | Solid biofuels - Terminology, definitions and descriptions |
| PREN 14780 : DRAFT 2010 | SOLID BIOFUELS - SAMPLE PREPARATION |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.