• There are no items in your cart

EN 14790:2017

Current
Current

The latest, up-to-date edition.

Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
Published date

01-11-2017

European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Description of the measuring system
7 Performance characteristics of the SRM
8 Field operation
9 Water vapour determination
10 Equivalence of an alternative method
11 Measurement report
Annex A (informative) - Validation of the method in the field
Annex B (normative) - Determination of water vapour concentration
        for water saturated gas, at p[ref] = 101,325 kPa
Annex C (informative) - Type of sampling equipment
Annex D (informative) - Example of assessment of compliance of
        standard reference method for water vapour with given
        uncertainty requirements
Annex E (informative) - Significant technical changes
Bibliography

This European Standard specifies the standard reference method (SRM) based on a sampling system with a condensation/adsorption technique to determine the water vapour concentration in the flue gases emitted to atmosphere from ducts and stacks. This European Standard specifies the performance characteristics to be determined and performance criteria to be fulfilled by measuring systems based on the measurement method. It applies to periodic monitoring and to the calibration or control of automated measuring systems (AMS) permanently installed on a stack, for regulatory or other purposes. This European Standard specifies criteria for demonstration of equivalence of an alternative method to the SRM by application of prEN 14793.This European Standard is applicable in the range of water vapour content from 4 % to 40 % as volume concentrations and of water vapour mass concentration from 29 g/m3 to 250 g/m3 as a wet gas, although for a given temperature the upper limit of the method is related to the maximum pressure of water in air or in the gas.In this European Standard all the concentrations are expressed at standard conditions (273 K and 101,3 kPa).NOTE 1For saturated conditions the condensation/adsorption method is not applicable. Some guidance is given in this European Standard to deal with flue gas when droplets are present.This European Standard has been evaluated during field tests on waste incineration, co-incineration and large combustion plants. It has been validated for sampling periods of 30 min in the volume concentration range of 7 % to 26 %.NOTE 2The characteristics of installations, the conditions during field tests and the values of repeatability and reproducibility in the field are given in Annex A.

DevelopmentNote
Supersedes PREN 14790. (01/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
DIN EN 14790:2017-05 Identical
UNI EN 14790:2017 Identical
NBN EN 14790 : 2006 Identical
BS EN 14790:2005 Identical
PN EN 14790 : 2017 Identical
UNE-EN 14790:2006 Identical
NF EN 14790 : 2017 Identical
UNI EN 14790 : 2006 Identical
DIN EN 14790:2006-04 Identical
DIN EN 14790 E : 2017 Identical
NS EN 14790 : 2017 Identical
UNE-EN 14790:2017 Identical
SN EN 14790 : 2017 Identical
NEN EN 14790 : 2017 Identical
I.S. EN 14790:2017 Identical
BS EN 14790:2017 Identical

11/30239461 DC : 0 BS EN ISO 16911-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF VELOCITY AND VOLUMETRIC FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD
UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
I.S. EN 12619:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
DIN EN 14789:2017-05 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
08/30161739 DC : DRAFT MAY 2008 BS EN ISO 11771 - AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH
I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
PREN 12619 : DRAFT 2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
11/30238654 DC : 0 BS EN 12619 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
14/30303591 DC : 0 BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
DIN EN 14789:2006-04 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
BS EN 14792:2017 Stationary source emissions. Determination of mass concentration of nitrogen oxides. Standard reference method. Chemiluminescence
I.S. EN 1948-1:2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 1: SAMPLING OF PCDDS/PCDFS
I.S. EN 14792:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE
I.S. EN 14789:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
I.S. EN 15058:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY
VDI 3890:2016-03 Emission control - Pet cremation facilities
VDI 3461:2016-09 (Draft) Emission control - Thermochemical gasification of biomass in cogeneration
VDI 2286 Blatt 1:2013-08 Emission control - Electrolytic aluminium reduction process
VDI 3460 Blatt 1:2014-02 Emission control - Thermal waste treatment - Fundamentals
VDI 3476 Blatt 1:2015-06 Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
VDI 2441:2016-05 Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation
VDI 3891:2015-07 Emission control - Human cremation facilities
VDI 3899 Blatt 1:2016-05 Emission control - Landfill gas - Utilisation and treatment of landfill gas
VDI 2447:2011-04 Emission control - Plants to the production and processing of acrylonitrile (AN)
VDI 3457:2016-06 Emission control - Powder coating
VDI 2576:2010-01 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal
VDI 3469 Blatt 1:2016-09 Emission control - Production and processing of fibrous materials - Fibrous dusts; Fundamentals, overview
VDI 2578:2017-05 Emission control - Glassworks
VDI 2095 Blatt 1:2011-03 Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities
VDI 4255 Blatt 3:2016-12 Bioaerosols and biological agents - Emission factors for poultry
VDI 3455:2013-08 Emission control - High-volume car body painting plants
VDI 3898:2013-01 Emission control - Plants for dry mechanical, physio-chemical, thermal and biological soil treatment
VDI 2594:2015-09 Emission control - Pulp production in the sugar industry
VDI 3475 Blatt 5:2015-10 Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment
VDI 2102 Blatt 2:2013-04 Emission control - Copper and copper alloy melting plants
VDI 3476 Blatt 2:2010-01 Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes
VDI 3477:2016-03 Biological waste gas purification - Biofilters
11/30243100 DC : 0 BS EN 13649 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD
BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
PD CEN/TS 16429:2013 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique
I.S. CEN/TS 17021:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF SULPHUR DIOXIDE BY INSTRUMENTAL TECHNIQUES
DIN EN 14792 E : 2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE
DIN EN 14792:2006-04 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE
UNI EN 12619 : 2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
UNI EN ISO 16911-1 : 2013 STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD
UNI EN 1948-1 : 2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 1: SAMPLING OF PCDDS/PCDFS
UNI CEN/TS 16429 : 2013 STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF HYDROGEN CHLORIDE CONTENT IN DUCTS AND STACKS - INFRARED ANALYTICAL TECHNIQUE
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
PREN 13649 : DRAFT 2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD
BS EN ISO 16911-1:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method
UNI EN ISO 11771 : 2011 AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH
DIN EN 15058 E : 2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY
DIN EN 14789 E : 2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
BS EN 15058:2017 Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry
BS EN 14789:2017 Stationary source emissions. Determination of volume concentration of oxygen. Standard reference method: Paramagnetism
BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
UNE-EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
ISO 16911-1:2013 Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method
UNE-EN ISO 16911-1:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013)
ISO 11771:2010 Air quality Determination of time-averaged mass emissions and emission factors General approach
DIN EN 15058:2006-09 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY
EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
EN ISO 16911-1:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013)
EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN ISO 11771 : 2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
DIN EN ISO 16911-1:2013-06 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013
I.S. EN ISO 16911-1:2013 STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013)
S.R. CEN/TS 16429:2013 STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF HYDROGEN CHLORIDE CONTENT IN DUCTS AND STACKS - INFRARED ANALYTICAL TECHNIQUE
EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
I.S. EN ISO 11771:2010 AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH

EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
EN 15259:2007 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
EN 14793:2017 Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.