EN 1495:1997+A2:2009/AC:2010
Current
The latest, up-to-date edition.
LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
02-10-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 List of hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (informative) Structural calculations
Annex B (normative) Special requirements for multilevel work
platforms
Annex C (normative) Requirements for electrical and electronic
aspects of overload detecting devices
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 2006/42/EC
Defines the special safety requirements for Mast Climbing Work Platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work.
Committee |
TC 98
|
DevelopmentNote |
1997 Edition Re-Issued in July 2009 & incorporates AMD 2 2009. (08/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
DS EN 1495 : 1998 COR 2010 | Identical |
UNI EN 1495 : 2009 | Identical |
NF EN 1495 : 1997 + A2 2009 | Identical |
I.S. EN 1495:1998 | Identical |
PN EN 1495 : 1999 AC 2010 | Identical |
BS EN 1495 : 1998 | Identical |
DIN EN 1495:2009-12 | Identical |
NBN EN 1495 : 1997 COR 2010 | Identical |
BS EN 1495 : 1997 | Identical |
NS EN 1495 : 1997 AC 2010 | Identical |
SN EN 1495 : 1998 CORR 2010 | Identical |
NEN EN 1495 : 1997 + A2/C11 2010 | Identical |
BS EN 1495:1997+A2:2009 | Identical |
UNE-EN 1495:1998 | Identical |
UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
BS EN 280 : 2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
09/30201429 DC : 0 | BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS |
DIN EN 12159:2013-03 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
I.S. EN 280:2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
UNE-EN 280:2014 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
DIN EN 280:2016-04 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015) |
EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
EN 16719:2018 | Transport platforms |
EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
ISO 4302:2016 | Cranes — Wind load assessment |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.