EN 1504-5:2013
Current
Current
The latest, up-to-date edition.
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
Published date
04-10-2013
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics in relation to the
general principles of protection and repair
5 Requirements
6 Sampling
7 Evaluation of conformity
8 Marking and labelling
Annex A (normative) - Classification of injection
products
Annex B (informative) - Special applications
Annex C (informative) - Minimum frequency of
testing for Factory Production Control
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Directive
Bibliography
This European Standard specifies requirements and conformity criteria for the identification, performance (including durability aspects) and safety of injection products for the repair and protection of concrete structures, used for: - force transmitting filling of cracks, voids and interstices in concrete (category F, see 3.1); - ductile filling of cracks, voids and interstices in concrete (category D, see 3.1); - swelling fitted filling of cracks, voids and interstices in concrete (category S, see 3.1).
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DS/EN 1504-5:2013/Ret.1:2022 | Identical |
| DIN EN 1504-5:2013-06 | Identical |
| PN EN 1504-5 : 2013 | Identical |
| NF EN 1504-5 : 2013 | Identical |
| UNE-EN 1504-5:2014 | Identical |
| SN EN 1504-5 : 2013 | Identical |
| NBN EN 1504-5 : 2013 | Identical |
| I.S. EN 1504-5:2013 | Identical |
| NEN EN 1504-5 : 2013 | Identical |
| UNE-EN 1504-5:2005 | Identical |
| UNI EN 1504-5 : 2013 | Identical |
| NS EN 1504-5 : 2013 | Identical |
| BS EN 1504-5:2013 | Identical |
| BS EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems |
| 02/102592 DC : DRAFT APR 2002 | PREN 14406 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE EXPANSION RATIO AND EXPANSION EVOLUTION |
| UNI EN 1504-9 : 2009 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ISO/TS 16774-4:2016 | Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface |
| ISO/TS 16774-3:2016 | Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance |
| DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| DD ENV 1504-9:1997 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity General principles for the use of products and systems |
| ISO/TS 16774-6:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures Part 6: Test method for response to the substrate movement |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| BS EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP Quality control and Assessment and verification of the constancy of performance (AVCP) |
| I.S. EN 1504-8:2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| ISO/TS 16774-5:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures Part 5: Test method for watertightness |
| 96/108350 DC : DRAFT NOV 1996 | PREN 12618-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 3: SLANT SHEAR METHOD |
| DIN EN 1504-9:2008-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS |
| 96/108349 DC : DRAFT NOV 1996 | PREN 12618-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 2: TENSILE BOND METHOD |
| I.S. EN 1504-9:2008 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| ISO/TS 16774-1:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures Part 1: Test method for thermal stability |
| ISO/TS 16774-2:2016 | Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance |
| UNE-EN 1504-9:2011 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| ISO/TR 16475:2011 | Guidelines for the repair of water-leakage cracks in concrete structures |
| DIN EN 1504-8:2016-08 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| EN 12618-1:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
| EN 14497:2004/AC:2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE FILTRATION STABILITY |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 13320:2009 | Particle size analysis Laser diffraction methods |
| EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 12190:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| EN 1771:2004/AC:2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF INJECTABILITY AND SPLITTING TEST |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN 1543:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers |
| EN 12618-2:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN 12715 : 2000 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - GROUTING |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| EN 445:2007 | Grout for prestressing tendons - Test methods |
| EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
| EN 14498:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN 12637-1:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 12637-3:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| EN 14117:2004 | Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products |
| EN 12614:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| EN 14068:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.