EN 15242:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration
Superseded date
06-01-2017
Published date
05-16-2007
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 General approach
6 Instantaneous calculation (iterative method)
6.1 Basis of the calculation method
6.2 Mechanical air flow calculation
6.3 Passive and hybrid duct ventilation
6.4 Combustion air flows
6.5 Air flow due to windows opening
6.6 Exfiltration and infiltration using iterative
method
6.7 Exflitration and infiltration calculation using
direct method
7 Applications
7.1 General
7.2 Energy
7.3 Heating load
7.4 Cooling loads
7.5 Summer comfort
7.6 Indoor air quality
Annex A (normative) - Data on wind pressure coefficients
Annex B (normative) - Leakages characteristics
Annex C (normative) - Calculation of recirculation coefficient
C[rec]
Annex D (normative) - Conversion formulas
Annex E (informative) - Examples of fuel flow factor for
residential buildings
Bibliography
This European Standard describes the method to calculate the ventilation air flow rates for buildings to be used for applications such as energy calculations, heat and cooling load calculation, summer comfort and indoor air quality evaluation.The ventilation and air tightness requirements (as IAQ, heating and cooling, safety, fire protection…) are not part of the standard.For these different applications, the same iterative method is used but the input parameter should be selected according to the field of application. For specific applications a direct calculation is also defined in this standard. A simplified approach is also allowed at national level following prescribed rules of implementation.The method is meant to be applied to: -Mechanically ventilated building (mechanical exhaust, mechanical supply or balanced system). -Passive ducts.-Hybrid system switching between mechanical and natural modes.-Windows opening by manual operation for airing or summer comfort issues.Automatic windows (or openings) are not directly considered here.Industry process ventilation is out of the scope. Kitchens where cooking is for immediate use are part of the standards (including restaurants..)Other kitchens are not part of the standard.The standard is not directly applicable for buildings higher than 100 m and rooms where vertical air temperature difference is higher than 15K. The results provided by the standard are the building envelope flows either through leakages or purpose provided openings and the air flows due to the ventilation system, taking into account the product and system characteristics.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 15242:2007-09 | Identical |
| PN EN 15242 : 2009 | Identical |
| NS EN 15242 : 1ED 2007 | Identical |
| NBN EN 15242 : 2007 | Identical |
| I.S. EN 15242:2007 | Identical |
| NEN EN 15242 : 2007 | Identical |
| SN EN 15242 : 2007 | Identical |
| BS EN 15242:2007 | Identical |
| UNE-EN 15242:2007 | Identical |
| DIN EN 15242 E : 2007 | Identical |
| NF EN 15242 : 2007 | Identical |
| UNI EN 15242 : 2008 | Identical |
| S.R. CEN/TR 15232-2:2016 | ENERGY PERFORMANCE OF BUILDINGS - PART 2: ACCOMPANYING TR PREN 15232-1:2015 - MODULES M10-4,5,6,7,8,9,10 |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS EN 15804 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| I.S. EN 15265:2007 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY NEEDS FOR SPACE HEATING AND COOLING USING DYNAMIC METHODS - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| 15/30303577 DC : 0 | BS EN ISO 52016-1 - ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF THE ENERGY NEEDS FOR HEATING AND COOLING, INTERNAL TEMPERATURES AND HEATING AND COOLING LOAD IN A BUILDING OR BUILDING ZONE - PART 1: CALCULATION PROCEDURES |
| 12/30268269 DC : 0 | BS EN 16485 - ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION |
| DIN EN 16757 E : 2017 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| DIN EN 15251 E : 2012 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| 14/30300963 DC : 0 | BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 15239:2007-08 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| DIN EN 15239 E : 2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| DIN EN 15243:2007-10 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| DIN EN 15243 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| DIN EN 15643-4:2012-04 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| EN 15643-1:2010 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| I.S. EN 16810:2017 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| CEN/TR 15232-2:2016 | Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10 |
| DIN EN 15232:2012-04 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| BS EN 15232:2012 | Energy performance of buildings. Impact of Building Automation, Controls and Building Management |
| DIN EN 15603:2008-07 | ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS |
| BS EN 15643-1:2010 | Sustainability of construction works. Sustainability assessment of buildings General framework |
| BS EN 15241:2007 | Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings |
| UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| 09/30192729 DC : DRAFT FEB 2009 | BS EN 15643-2 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| BS EN 15643-4:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance |
| 15/30297468 DC : 0 | BS EN 16798-3 - ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 15241:2011-06 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 15804:2014-07 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| 15/30263791 DC : 0 | BS ISO 17772-1 - ENERGY PERFORMANCE OF BUILDINGS - INDOOR ENVIRONMENTAL QUALITY - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR THE DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS |
| BS EN 15239:2007 | Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems |
| I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| EN 15643-2:2011 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| EN 15643-4:2012 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| DIN EN 15643-1:2010-12 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| UNI EN 15643-2 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| UNI EN 15603 : 2008 | ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS |
| EN 15804:2012 | Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products |
| DIN EN 15232 E : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| UNE-EN 15232:2014 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| BS EN 15243:2007 | Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| BS EN 15643-2:2011 | Sustainability of construction works. Assessment of buildings Framework for the assessment of environmental performance |
| DIN EN 16757:2016-07 (Draft) | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| 11/30244232 DC : DRAFT JUNE 2011 | BS EN 15232 - ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| DIN EN 16810 E : 2017 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| BS ISO 17772-1:2017 | Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| UNE-EN 16810:2017 | Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules |
| I.S. EN 15804:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| 09/30192733 DC : DRAFT FEB 2009 | BS EN 15643-1 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| UNI EN 15665 : 2009 | VENTILATION FOR BUILDINGS - DETERMINING PERFORMANCE CRITERIA FOR RESIDENTIAL VENTILATION SYSTEMS |
| BS EN 15603:2008 | Energy performance of buildings. Overall energy use and definition of energy ratings |
| DIN EN 15804 E : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| I.S. EN 16757:2017 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| ISO 23045:2008 | Building environment design Guidelines to assess energy efficiency of new buildings |
| I.S. EN 15241:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 15265 E : 2007 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY NEEDS FOR SPACE HEATING AND COOLING USING DYNAMIC METHODS - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| DIN EN 15265:2007-11 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY NEEDS FOR SPACE HEATING AND COOLING USING DYNAMIC METHODS - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| EN 16810:2017 | Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules |
| UNI EN 15232 : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS EN 15665:2009 | Ventilation for buildings. Determining performance criteria for residential ventilation systems |
| 16/30339217 DC : DRAFT JUNE 2016 | BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| BS EN 16810:2017 | Resilient, textile and laminate floor coverings. Environmental product declarations. Product category rules |
| DIN EN 15241 E : 2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| DIN EN 15665 E : 2009 | VENTILATION FOR BUILDINGS - DETERMINING PERFORMANCE CRITERIA FOR RESIDENTIAL VENTILATION SYSTEMS |
| BS EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN EN 15603 E : 2008 | ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS |
| 16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| 14/30312994 DC : 0 | BS EN 16810 - SUSTAINABILITY OF CONSTRUCTION WORK - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS |
| DIN EN 15643-2:2011-05 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| UNI EN 15804 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| I.S. EN 15665:2009 | VENTILATION FOR BUILDINGS - DETERMINING PERFORMANCE CRITERIA FOR RESIDENTIAL VENTILATION SYSTEMS |
| I.S. EN 15239:2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| BS EN 15265:2007 | Energy performance of buildings. Calculation of energy needs for space heating and cooling using dynamic methods. General criteria and validation procedures |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| UNE-EN 15804:2012 | Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN 15665:2009 | Ventilation for buildings - Determining performance criteria for residential ventilation systems |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| EN 16757:2017 | Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements |
| EN 15265:2007 | Energy performance of buildings - Calculation of energy needs for space heating and cooling using dynamic methods - General criteria and validation procedures |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 15232:2012 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
| BS EN 16757:2017 | Sustainability of construction works. Environmental product declarations. Product Category Rules for concrete and concrete elements |
| 12/30237844 DC : 0 | BS ISO 16346 - ENERGY PERFORMANCE OF BUILDINGS - ASSESSMENT OF OVERALL ENERGY PERFORMANCE |
| DIN EN 16810:2017-08 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| I.S. EN 15232:2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| ISO 17772-1:2017 | Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| PD CEN/TR 15232-2:2016 | Energy performance of buildings Accompanying TR prEN 15232-1:2015. Modules M10-4,5,6,7,8,9,10 |
| I.S. EN 15643-1:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| UNI EN 15643-1 : 2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| I.S. EN 15243:2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| I.S. EN 15643-2:2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| 15/30297473 DC : 0 | BS EN 16798-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6 |
| I.S. EN 15603:2008 | ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS |
| I.S. EN 15251:2007 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| DIN EN 15665:2009-07 | VENTILATION FOR BUILDINGS - DETERMINING PERFORMANCE CRITERIA FOR RESIDENTIAL VENTILATION SYSTEMS |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| EN 14239:2004 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| EN ISO 15927-1:2003 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements (ISO 15927-1:2003) |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| CR 14378:2002/AC:2002 | VENTILATION FOR BUILDINGS - EXPERIMENTAL DETERMINATION OF MECHANICAL ENERGY LOSS COEFFICIENTS OF AIR HANDLING COMPONENTS |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| ISO 15927-1:2003 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements |
| EN 13141-5:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
| EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| ISO 13791:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.